Unit Testing a zend-mvc application
A solid unit test suite is essential for ongoing development in large projects, especially those with many people involved. Going back and manually testing every individual component of an application after every change is impractical. Your unit tests will help alleviate that by automatically testing your application's components and alerting you when something is not working the same way it was when you wrote your tests.
This tutorial is written in the hopes of showing how to test different parts of a zend-mvc application. As such, this tutorial will use the application written in the getting started user guide. It is in no way a guide to unit testing in general, but is here only to help overcome the initial hurdles in writing unit tests for zend-mvc applications.
It is recommended to have at least a basic understanding of unit tests, assertions and mocks.
zend-test, which provides testing integration for zend-mvc, uses PHPUnit; this tutorial will cover using that library for testing your applications.
Installing zend-test
zend-test provides PHPUnit integration for zend-mvc, including application scaffolding and custom assertions. You will need to install it:
$ composer require --dev zendframework/zend-testThe above command will update your composer.json file and perform an update for you, which will also setup autoloading rules.
Running the initial tests
Out-of-the-box, the skeleton application provides several tests for the shippedApplication\Controller\IndexController class. Now that you have zend-test installed, you can run these:
$ ./vendor/bin/phpunitYou should see output similar to the following:
PHPUnit 5.4.5 by Sebastian Bergmann and contributors.
... 3 / 3 (100%)
Time: 116 ms, Memory: 11.00MB
OK (3 tests, 7 assertions)Now it's time to write our own tests!
Setting up the tests directory
As zend-mvc applications are built from modules that should be standalone blocks of an application, we don't test the application in it's entirety, but module by module.
We will demonstrate setting up the minimum requirements to test a module, the Album module we wrote in the user guide, which then can be used as a base for testing any other module.
Start by creating a directory called test under module/Album/ with the following subdirectories:
module/
Album/
test/
Controller/Additionally, add an autoload-dev rule in your composer.json:
"autoload-dev": {
"psr-4": {
"ApplicationTest\\": "module/Application/test/",
"AlbumTest\\": "module/Album/test/"
}
}When done, run:
$ composer dump-autoloadThe structure of the test directory matches exactly with that of the module's source files, and it will allow you to keep your tests well-organized and easy to find.
Bootstrapping your tests
Next, edit the phpunit.xml.dist file at the project root; we'll add a new test suite to it. When done, it should read as follows:
<?xml version="1.0" encoding="UTF-8"?>
<phpunit colors="true">
<testsuites>
<testsuite name="ZendSkeletonApplication Test Suite">
<directory>./module/Application/test</directory>
</testsuite>
<testsuite name="Album">
<directory>./module/Album/test</directory>
</testsuite>
</testsuites>
</phpunit>Now run phpunit -- testsuite Album from the project root; you should get similar output to the following:
PHPUnit 5.3.4 by Sebastian Bergmann and contributors.
Time: 0 seconds, Memory: 1.75Mb
No tests executed!Let's write our first test!
Your first controller test
Testing controllers is never an easy task, but the zend-test component makes testing much less cumbersome.
First, create AlbumControllerTest.php under module/Album/test/Controller/with the following contents:
<?php
namespace AlbumTest\Controller;
use Album\Controller\AlbumController;
use Zend\Stdlib\ArrayUtils;
use Zend\Test\PHPUnit\Controller\AbstractHttpControllerTestCase;
class AlbumControllerTest extends AbstractHttpControllerTestCase
{
protected $traceError = false;
public function setUp()
{
// The module configuration should still be applicable for tests.
// You can override configuration here with test case specific values,
// such as sample view templates, path stacks, module_listener_options,
// etc.
$configOverrides = [];
$this->setApplicationConfig(ArrayUtils::merge(
// Grabbing the full application configuration:
include __DIR__ . '/../../../../config/application.config.php',
$configOverrides
));
parent::setUp();
}
}The AbstractHttpControllerTestCase class we extend here helps us setting up the application itself, helps with dispatching and other tasks that happen during a request, and offers methods for asserting request params, response headers, redirects, and more. See the zend-test documentation for more information.
The principal requirement for any zend-test test case is to set the application config with the setApplicationConfig() method. For now, we assume the default application configuration will be appropriate; however, we can override values locally within the test using the $configOverrides variable.
Now, add the following method to the AlbumControllerTest class:
public function testIndexActionCanBeAccessed()
{
$this->dispatch('/album');
$this->assertResponseStatusCode(200);
$this->assertModuleName('Album');
$this->assertControllerName(AlbumController::class);
$this->assertControllerClass('AlbumController');
$this->assertMatchedRouteName('album');
}This test case dispatches the /album URL, asserts that the response code is 200, and that we ended up in the desired module and controller.
Assert against controller service names
For asserting the controller name we are using the controller name we defined in our routing configuration for the Album module. In our example this should be defined on line 19 of the
module.config.phpfile in the Album module.
If you run:
$ ./vendor/bin/phpunit --testsuite Albumagain, you should see something like the following:
PHPUnit 5.4.5 by Sebastian Bergmann and contributors.
. 1 / 1 (100%)
Time: 124 ms, Memory: 11.50MB
OK (1 test, 5 assertions)A successful first test!
A failing test case
We likely don't want to hit the same database during testing as we use for our web property. Let's add some configuration to the test case to remove the database configuration. In your AlbumControllerTest::setUp() method, add the following lines following the call to parent::setUp();:
$services = $this->getApplicationServiceLocator();
$config = $services->get('config');
unset($config['db']);
$services->setAllowOverride(true);
$services->setService('config', $config);
$services->setAllowOverride(false);The above removes the 'db' configuration entirely; we'll be replacing it with something else before long.
When we run the tests now:
$ ./vendor/bin/phpunit --testsuite Album
PHPUnit 5.3.4 by Sebastian Bergmann and contributors.
F
Time: 0 seconds, Memory: 8.50Mb
There was 1 failure:
1) AlbumTest\Controller\AlbumControllerTest::testIndexActionCanBeAccessed
Failed asserting response code "200", actual status code is "500"
{projectPath}/vendor/ZF2/library/Zend/Test/PHPUnit/Controller/AbstractControllerTestCase.php:{lineNumber}
{projectPath}/module/Album/test/AlbumTest/Controller/AlbumControllerTest.php:{lineNumber}
FAILURES!
Tests: 1, Assertions: 0, Failures: 1.The failure message doesn't tell us much, apart from that the expected status code is not 200, but 500. To get a bit more information when something goes wrong in a test case, we set the protected $traceError member to true (which is the default; we set it to false to demonstrate this capability). Modify the following line from just above the setUp method in our AlbumControllerTestclass:
protected $traceError = true;Running the phpunit command again and we should see some more information about what went wrong in our test. You'll get a list of the exceptions raised, along with their messages, the filename, and line number:
1) AlbumTest\Controller\AlbumControllerTest::testIndexActionCanBeAccessed
Failed asserting response code "200", actual status code is "500"
Exceptions raised:
Exception 'Zend\ServiceManager\Exception\ServiceNotCreatedException' with message 'Service with name "Zend\Db\Adapter\AdapterInterface" could not be created. Reason: createDriver expects a "driver" key to be present inside the parameters' in {projectPath}/vendor/zendframework/zend-servicemanager/src/ServiceManager.php:{lineNumber}
Exception 'Zend\Db\Adapter\Exception\InvalidArgumentException' with message 'createDriver expects a "driver" key to be present inside the parameters' in {projectPath}/vendor/zendframework/zend-db/src/Adapter/Adapter.php:{lineNumber}Based on the exception messages, it appears we are unable to create a zend-db adapter instance, due to missing configuration!
Configuring the service manager for the tests
The error says that the service manager can not create an instance of a database adapter for us. The database adapter is indirectly used by ourAlbum\Model\AlbumTable to fetch the list of albums from the database.
The first thought would be to create an instance of an adapter, pass it to the service manager, and let the code run from there as is. The problem with this approach is that we would end up with our test cases actually doing queries against the database. To keep our tests fast, and to reduce the number of possible failure points in our tests, this should be avoided.
The second thought would be then to create a mock of the database adapter, and prevent the actual database calls by mocking them out. This is a much better approach, but creating the adapter mock is tedious (but no doubt we will have to create it at some point).
The best thing to do would be to mock out our Album\Model\AlbumTable class which retrieves the list of albums from the database. Remember, we are now testing our controller, so we can mock out the actual call to fetchAll and replace the return values with dummy values. At this point, we are not interested in how fetchAll() retrieves the albums, but only that it gets called and that it returns an array of albums; these facts allow us to provide mock instances. When we test AlbumTable itself, we can write the actual tests for thefetchAll method.
First, let's do some setup.
Add an import statement to the top of the test class file for the AlbumTable:
use Album\Model\AlbumTable;Now add the following property to the test class:
protected $albumTable;Next, we'll create three new methods that we'll invoke during setup:
protected function configureServiceManager(ServiceManager $services)
{
$services->setAllowOverride(true);
$services->setService('config', $this->updateConfig($services->get('config')));
$services->setService(AlbumTable::class, $this->mockAlbumTable()->reveal());
$services->setAllowOverride(false);
}
protected function updateConfig($config)
{
$config['db'] = [];
return $config;
}
protected function mockAlbumTable()
{
$this->albumTable = $this->prophesize(AlbumTable::class);
return $this->albumTable;
}By default, the ServiceManager does not allow us to replace existing services.configureServiceManager() calls a special method on the instance to enable overriding services, and then we inject specific overrides we wish to use. When done, we disable overrides to ensure that if, during dispatch, any code attempts to override a service, an exception will be raised.
The last method above creates a mock instance of our AlbumTable usingProphecy, an object mocking framework that's bundled and integrated in PHPUnit. The instance returned by prophesize() is a scaffold object; callingreveal() on it, as done in the configureServiceManager() method above, provides the underlying mock object that will then be asserted against.
With this in place, we can update our setUp() method to read as follows:
public function setUp()
{
// The module configuration should still be applicable for tests.
// You can override configuration here with test case specific values,
// such as sample view templates, path stacks, module_listener_options,
// etc.
$configOverrides = [];
$this->setApplicationConfig(ArrayUtils::merge(
include __DIR__ . '/../../../../config/application.config.php',
$configOverrides
));
parent::setUp();
$this->configureServiceManager($this->getApplicationServiceLocator());
}Now update the testIndexActionCanBeAccessed() method to add a line asserting the AlbumTable's fetchAll() method will be called, and return an array:
public function testIndexActionCanBeAccessed()
{
$this->albumTable->fetchAll()->willReturn([]);
$this->dispatch('/album', 'GET');
$this->assertResponseStatusCode(200);
$this->assertModuleName('Album');
$this->assertControllerName(AlbumController::class);
$this->assertControllerClass('AlbumController');
$this->assertMatchedRouteName('album');
}Running phpunit at this point, we will get the following output as the tests now pass:
$ ./vendor/bin/phpunit --testsuite Album
PHPUnit 5.4.5 by Sebastian Bergmann and contributors.
. 1 / 1 (100%)
Time: 105 ms, Memory: 10.75MB
OK (1 test, 5 assertions)Testing actions with POST
A common scenario with controllers is processing POST data submitted via a form, as we do in the AlbumController::addAction(). Let's write a test for that.
:linenos:}
public function testAddActionRedirectsAfterValidPost()
{
$this->albumTable
->saveAlbum(Argument::type(Album::class))
->shouldBeCalled();
$postData = [
'title' => 'Led Zeppelin III',
'artist' => 'Led Zeppelin',
'id' => '',
];
$this->dispatch('/album/add', 'POST', $postData);
$this->assertResponseStatusCode(302);
$this->assertRedirectTo('/album');
}This test case references two new classes that we need to import; add the following import statements at the top of the class file:
use Album\Model\Album;
use Prophecy\Argument;Prophecy\Argument allows us to perform assertions against the values passed as arguments to mock objects. In this case, we want to assert that we received anAlbum instance. (We could have also done deeper assertions to ensure the Albuminstance contained expected data.)
When we dispatch the application this time, we use the request method POST, and pass data to it. This test case then asserts a 302 response status, and introduces a new assertion against the location to which the response redirects.
Running phpunit gives us the following output:
$ ./vendor/bin/phpunit --testsuite Album
PHPUnit 5.4.5 by Sebastian Bergmann and contributors.
.. 2 / 2 (100%)
Time: 1.49 seconds, Memory: 13.25MB
OK (2 tests, 8 assertions)Testing the editAction() and deleteAction() methods can be performed similarly; however, when testing the editAction() method, you will also need to assert against the AlbumTable::getAlbum() method:
$this->albumTable->getAlbum($id)->willReturn(new Album());Ideally, you should test all the various paths through each method. For example:
- Test that a non-POST request to
addAction()displays an empty form. - Test that a invalid data provided to
addAction()re-displays the form, but with error messages. - Test that absence of an identifier in the route parameters when invoking either
editAction()ordeleteAction()will redirect to the appropriate location. - Test that an invalid identifier passed to
editAction()will redirect to the album landing page. - Test that non-POST requests to
editAction()anddeleteAction()display forms.
and so on. Doing so will help you understand the paths through your application and controllers, as well as ensure that changes in behavior bubble up as test failures.
Testing model entities
Now that we know how to test our controllers, let us move to an other important part of our application: the model entity.
Here we want to test that the initial state of the entity is what we expect it to be, that we can convert the model's parameters to and from an array, and that it has all the input filters we need.
Create the file AlbumTest.php in module/Album/test/Model directory with the following contents:
<?php
namespace AlbumTest\Model;
use Album\Model\Album;
use PHPUnit_Framework_TestCase as TestCase;
class AlbumTest extends TestCase
{
public function testInitialAlbumValuesAreNull()
{
$album = new Album();
$this->assertNull($album->artist, '"artist" should be null by default');
$this->assertNull($album->id, '"id" should be null by default');
$this->assertNull($album->title, '"title" should be null by default');
}
public function testExchangeArraySetsPropertiesCorrectly()
{
$album = new Album();
$data = [
'artist' => 'some artist',
'id' => 123,
'title' => 'some title'
];
$album->exchangeArray($data);
$this->assertSame(
$data['artist'],
$album->artist,
'"artist" was not set correctly'
);
$this->assertSame(
$data['id'],
$album->id,
'"id" was not set correctly'
);
$this->assertSame(
$data['title'],
$album->title,
'"title" was not set correctly'
);
}
public function testExchangeArraySetsPropertiesToNullIfKeysAreNotPresent()
{
$album = new Album();
$album->exchangeArray([
'artist' => 'some artist',
'id' => 123,
'title' => 'some title',
]);
$album->exchangeArray([]);
$this->assertNull($album->artist, '"artist" should default to null');
$this->assertNull($album->id, '"id" should default to null');
$this->assertNull($album->title, '"title" should default to null');
}
public function testGetArrayCopyReturnsAnArrayWithPropertyValues()
{
$album = new Album();
$data = [
'artist' => 'some artist',
'id' => 123,
'title' => 'some title'
];
$album->exchangeArray($data);
$copyArray = $album->getArrayCopy();
$this->assertSame($data['artist'], $copyArray['artist'], '"artist" was not set correctly');
$this->assertSame($data['id'], $copyArray['id'], '"id" was not set correctly');
$this->assertSame($data['title'], $copyArray['title'], '"title" was not set correctly');
}
public function testInputFiltersAreSetCorrectly()
{
$album = new Album();
$inputFilter = $album->getInputFilter();
$this->assertSame(3, $inputFilter->count());
$this->assertTrue($inputFilter->has('artist'));
$this->assertTrue($inputFilter->has('id'));
$this->assertTrue($inputFilter->has('title'));
}
}We are testing for 5 things:
- Are all of the
Album's properties initially set toNULL? - Will the
Album's properties be set correctly when we callexchangeArray()? - Will a default value of
NULLbe used for properties whose keys are not present in the$dataarray? - Can we get an array copy of our model?
- Do all elements have input filters present?
If we run phpunit again, we will get the following output, confirming that our model is indeed correct:
$ ./vendor/bin/phpunit --testsuite Album
PHPUnit 5.4.5 by Sebastian Bergmann and contributors.
....... 7 / 7 (100%)
Time: 186 ms, Memory: 13.75MB
OK (7 tests, 24 assertions)Testing model tables
The final step in this unit testing tutorial for zend-mvc applications is writing tests for our model tables.
This test assures that we can get a list of albums, or one album by its ID, and that we can save and delete albums from the database.
To avoid actual interaction with the database itself, we will replace certain parts with mocks.
Create a file AlbumTableTest.php in module/Album/test/Model/ with the following contents:
<?php
namespace AlbumTest\Model;
use Album\Model\AlbumTable;
use Album\Model\Album;
use PHPUnit_Framework_TestCase as TestCase;
use RuntimeException;
use Zend\Db\ResultSet\ResultSetInterface;
use Zend\Db\TableGateway\TableGatewayInterface;
class AlbumTableTest extends TestCase
{
protected function setUp()
{
$this->tableGateway = $this->prophesize(TableGatewayInterface::class);
$this->albumTable = new AlbumTable($this->tableGateway->reveal());
}
public function testFetchAllReturnsAllAlbums()
{
$resultSet = $this->prophesize(ResultSetInterface::class)->reveal();
$this->tableGateway->select()->willReturn($resultSet);
$this->assertSame($resultSet, $this->albumTable->fetchAll());
}
}Since we are testing the AlbumTable here and not the TableGateway class (which has already been tested in zend-db), we only want to make sure that ourAlbumTable class is interacting with the TableGateway class the way that we expect it to. Above, we're testing to see if the fetchAll() method of AlbumTablewill call the select() method of the $tableGateway property with no parameters. If it does, it should return a ResultSet instance. Finally, we expect that this same ResultSet object will be returned to the calling method. This test should run fine, so now we can add the rest of the test methods:
public function testCanDeleteAnAlbumByItsId()
{
$this->tableGateway->delete(['id' => 123])->shouldBeCalled();
$this->albumTable->deleteAlbum(123);
}
public function testSaveAlbumWillInsertNewAlbumsIfTheyDontAlreadyHaveAnId()
{
$albumData = [
'artist' => 'The Military Wives',
'title' => 'In My Dreams'
];
$album = new Album();
$album->exchangeArray($albumData);
$this->tableGateway->insert($albumData)->shouldBeCalled();
$this->albumTable->saveAlbum($album);
}
public function testSaveAlbumWillUpdateExistingAlbumsIfTheyAlreadyHaveAnId()
{
$albumData = [
'id' => 123,
'artist' => 'The Military Wives',
'title' => 'In My Dreams',
];
$album = new Album();
$album->exchangeArray($albumData);
$resultSet = $this->prophesize(ResultSetInterface::class);
$resultSet->current()->willReturn($album);
$this->tableGateway
->select(['id' => 123])
->willReturn($resultSet->reveal());
$this->tableGateway
->update(
array_filter($albumData, function ($key) {
return in_array($key, ['artist', 'title']);
}, ARRAY_FILTER_USE_KEY),
['id' => 123]
)->shouldBeCalled();
$this->albumTable->saveAlbum($album);
}
public function testExceptionIsThrownWhenGettingNonExistentAlbum()
{
$resultSet = $this->prophesize(ResultSetInterface::class);
$resultSet->current()->willReturn(null);
$this->tableGateway
->select(['id' => 123])
->willReturn($resultSet->reveal());
$this->setExpectedException(
RuntimeException::class,
'Could not find row with identifier 123'
);
$this->albumTable->getAlbum(123);
}These tests are nothing complicated and should be self explanatory. In each test, we add assertions to our mock table gateway, and then call and assert against methods in our AlbumTable.
We are testing that:
- We can retrieve an individual album by its ID.
- We can delete albums.
- We can save a new album.
- We can update existing albums.
- We will encounter an exception if we're trying to retrieve an album that doesn't exist.
Running phpunit one last time, we get the output as follows:
$ ./vendor/bin/phpunit --testsuite Album
PHPUnit 5.4.5 by Sebastian Bergmann and contributors.
............. 13 / 13 (100%)
Time: 151 ms, Memory: 14.00MB
OK (13 tests, 31 assertions)Conclusion
In this short tutorial, we gave a few examples how different parts of a zend-mvc application can be tested. We covered setting up the environment for testing, how to test controllers and actions, how to approach failing test cases, how to configure the service manager, as well as how to test model entities and model tables.
This tutorial is by no means a definitive guide to writing unit tests, just a small stepping stone helping you develop applications of higher quality.