>_<" 其实生成GUI有相应的工具:
>_<" 将对应的控件布置好之后点击保存,会生成一个c文件,这个c文件要做些修改:
- 将资源列表里的每一个控件的最后一个参数删掉
- 将最后一个函数中的: hWin = GUI_CreateDialogBox(_aDialogCreate, GUI_COUNTOF(_aDialogCreate), &_cbDialog, WM_HBKWIN, 0, 0);改为:GUI_ExecDialogBox(_aDialogCreate, GUI_COUNTOF(_aDialogCreate),&_cbDialog, 0, 0, 0);否则会不出现效果~
- 再编译出错,就说明少一些文件引入,比如你窗口里有进度条,如果少了#include "..\GUIinc\PROGBAR.h"则会报错!
生成c文件
>_<" 下面是修改后的c文件,今后采用这种方法就能很快生成想要的界面啦!
1 #include "..\GUIinc\GUI.h" 2 #include "..\GUIinc\LCD_ConfDefaults.h" /* valid LCD configuration */ 3 #include "..\GUIinc\WM.h" 4 #include "..\GUIinc\DIALOG.h" 5 #include "..\GUIinc\EDIT.h" 6 #include "..\GUIinc\SLIDER.h" 7 #include "..\GUIinc\FRAMEWIN.h" 8 #include "..\GUIinc\MULTIEDIT.h" 9 #include "..\GUIinc\LISTVIEW.h" 10 #include "..\GUIinc\PROGBAR.h" 11 #include "demo.h" 12 13 #include "DIALOG.h" 14 15 #define ID_FRAMEWIN_0 (GUI_ID_USER + 0x0E) 16 #define ID_TEXT_0 (GUI_ID_USER + 0x10) 17 #define ID_LISTBOX_0 (GUI_ID_USER + 0x11) 18 #define ID_LISTVIEW_0 (GUI_ID_USER + 0x12) 19 #define ID_RADIO_0 (GUI_ID_USER + 0x13) 20 #define ID_PROGBAR_0 (GUI_ID_USER + 0x14) 21 #define ID_LISTBOX_1 (GUI_ID_USER + 0x15) 22 #define ID_CHECKBOX_0 (GUI_ID_USER + 0x17) 23 #define ID_BUTTON_0 (GUI_ID_USER + 0x18) 24 #define ID_BUTTON_1 (GUI_ID_USER + 0x19) 25 #define ID_SLIDER_0 (GUI_ID_USER + 0x1A) 26 #define ID_EDIT_0 (GUI_ID_USER + 0x1C) 27 #define ID_CHECKBOX_1 (GUI_ID_USER + 0x1D) 28 #define ID_CHECKBOX_2 (GUI_ID_USER + 0x1E) 29 30 // USER START (Optionally insert additional defines) 31 // USER END 32 33 /********************************************************************* 34 * 35 * Static data 36 * 37 ********************************************************************** 38 */ 39 40 // USER START (Optionally insert additional static data) 41 // USER END 42 43 /********************************************************************* 44 * 45 * _aDialogCreate 46 */ 47 static const GUI_WIDGET_CREATE_INFO _aDialogCreate[] = { 48 { FRAMEWIN_CreateIndirect, "Framewin", ID_FRAMEWIN_0, 0, 0, 800, 480, 0, 0}, 49 { TEXT_CreateIndirect, "Text", ID_TEXT_0, 44, 176, 80, 20, 0, 0}, 50 { LISTBOX_CreateIndirect, "Listbox", ID_LISTBOX_0, 283, 10, 146, 150, 0, 0}, 51 { LISTVIEW_CreateIndirect, "Listview", ID_LISTVIEW_0, 446, 15, 336, 185, 0, 0}, 52 { RADIO_CreateIndirect, "Radio", ID_RADIO_0, 95, 20, 80, 60, 0, 5122}, 53 { PROGBAR_CreateIndirect, "Progbar", ID_PROGBAR_0, 228, 375, 282, 20, 0, 0}, 54 { LISTBOX_CreateIndirect, "Listbox", ID_LISTBOX_1, 632, 215, 144, 179, 0, 0}, 55 { CHECKBOX_CreateIndirect, "Checkbox", ID_CHECKBOX_0, 8, 29, 80, 19, 0, 0}, 56 { BUTTON_CreateIndirect, "Button", ID_BUTTON_0, 77, 332, 80, 20, 0, 0}, 57 { BUTTON_CreateIndirect, "Button", ID_BUTTON_1, 76, 306, 80, 20, 0, 0}, 58 { SLIDER_CreateIndirect, "Slider", ID_SLIDER_0, 226, 317, 292, 31, 0, 0}, 59 { EDIT_CreateIndirect, "Edit", ID_EDIT_0, 236, 238, 266, 22, 0, 100}, 60 { CHECKBOX_CreateIndirect, "Checkbox", ID_CHECKBOX_1, 11, 52, 80, 20, 0, 0}, 61 { CHECKBOX_CreateIndirect, "Checkbox", ID_CHECKBOX_2, 8, 7, 80, 20, 0, 0}, 62 // USER START (Optionally insert additional widgets) 63 // USER END 64 }; 65 66 /********************************************************************* 67 * 68 * Static code 69 * 70 ********************************************************************** 71 */ 72 73 // USER START (Optionally insert additional static code) 74 // USER END 75 76 /********************************************************************* 77 * 78 * _cbDialog 79 */ 80 static void _cbDialog(WM_MESSAGE * pMsg) { 81 WM_HWIN hItem; 82 int Id, NCode; 83 // USER START (Optionally insert additional variables) 84 // USER END 85 86 switch (pMsg->MsgId) { 87 case WM_INIT_DIALOG: 88 // 89 // Initialization of 'Listbox' 90 // 91 hItem = WM_GetDialogItem(pMsg->hWin, ID_LISTBOX_0); 92 LISTBOX_AddString(hItem, "Item 0"); 93 LISTBOX_AddString(hItem, "Item 1"); 94 LISTBOX_AddString(hItem, "Item 2"); 95 // 96 // Initialization of 'Listview' 97 // 98 hItem = WM_GetDialogItem(pMsg->hWin, ID_LISTVIEW_0); 99 LISTVIEW_AddColumn(hItem, 30, "Col 0", GUI_TA_HCENTER | GUI_TA_VCENTER); 100 LISTVIEW_AddColumn(hItem, 30, "Col 1", GUI_TA_HCENTER | GUI_TA_VCENTER); 101 LISTVIEW_AddColumn(hItem, 30, "Col 2", GUI_TA_HCENTER | GUI_TA_VCENTER); 102 LISTVIEW_AddRow(hItem, NULL); 103 LISTVIEW_SetGridVis(hItem, 1); 104 LISTVIEW_SetItemBkColor(hItem, 0, 0, LISTVIEW_CI_UNSEL, 0x00FFFFFF); 105 // 106 // Initialization of 'Listbox' 107 // 108 hItem = WM_GetDialogItem(pMsg->hWin, ID_LISTBOX_1); 109 LISTBOX_AddString(hItem, "Item 0"); 110 LISTBOX_AddString(hItem, "Item 1"); 111 LISTBOX_AddString(hItem, "Item 2"); 112 // 113 // Initialization of 'Checkbox' 114 // 115 hItem = WM_GetDialogItem(pMsg->hWin, ID_CHECKBOX_0); 116 CHECKBOX_SetText(hItem, "Check"); 117 // 118 // Initialization of 'Edit' 119 // 120 hItem = WM_GetDialogItem(pMsg->hWin, ID_EDIT_0); 121 EDIT_SetText(hItem, "123"); 122 // 123 // Initialization of 'Checkbox' 124 // 125 hItem = WM_GetDialogItem(pMsg->hWin, ID_CHECKBOX_1); 126 CHECKBOX_SetText(hItem, "Check"); 127 // 128 // Initialization of 'Checkbox' 129 // 130 hItem = WM_GetDialogItem(pMsg->hWin, ID_CHECKBOX_2); 131 CHECKBOX_SetText(hItem, "Check"); 132 // USER START (Optionally insert additional code for further widget initialization) 133 // USER END 134 break; 135 case WM_NOTIFY_PARENT: 136 Id = WM_GetId(pMsg->hWinSrc); 137 NCode = pMsg->Data.v; 138 switch(Id) { 139 case ID_LISTBOX_0: // Notifications sent by 'Listbox' 140 switch(NCode) { 141 case WM_NOTIFICATION_CLICKED: 142 // USER START (Optionally insert code for reacting on notification message) 143 // USER END 144 break; 145 case WM_NOTIFICATION_RELEASED: 146 // USER START (Optionally insert code for reacting on notification message) 147 // USER END 148 break; 149 case WM_NOTIFICATION_SEL_CHANGED: 150 // USER START (Optionally insert code for reacting on notification message) 151 // USER END 152 break; 153 // USER START (Optionally insert additional code for further notification handling) 154 // USER END 155 } 156 break; 157 case ID_LISTVIEW_0: // Notifications sent by 'Listview' 158 switch(NCode) { 159 case WM_NOTIFICATION_CLICKED: 160 // USER START (Optionally insert code for reacting on notification message) 161 // USER END 162 break; 163 case WM_NOTIFICATION_RELEASED: 164 // USER START (Optionally insert code for reacting on notification message) 165 // USER END 166 break; 167 case WM_NOTIFICATION_SEL_CHANGED: 168 // USER START (Optionally insert code for reacting on notification message) 169 // USER END 170 break; 171 // USER START (Optionally insert additional code for further notification handling) 172 // USER END 173 } 174 break; 175 case ID_RADIO_0: // Notifications sent by 'Radio' 176 switch(NCode) { 177 case WM_NOTIFICATION_CLICKED: 178 // USER START (Optionally insert code for reacting on notification message) 179 // USER END 180 break; 181 case WM_NOTIFICATION_RELEASED: 182 // USER START (Optionally insert code for reacting on notification message) 183 // USER END 184 break; 185 case WM_NOTIFICATION_VALUE_CHANGED: 186 // USER START (Optionally insert code for reacting on notification message) 187 // USER END 188 break; 189 // USER START (Optionally insert additional code for further notification handling) 190 // USER END 191 } 192 break; 193 case ID_LISTBOX_1: // Notifications sent by 'Listbox' 194 switch(NCode) { 195 case WM_NOTIFICATION_CLICKED: 196 // USER START (Optionally insert code for reacting on notification message) 197 // USER END 198 break; 199 case WM_NOTIFICATION_RELEASED: 200 // USER START (Optionally insert code for reacting on notification message) 201 // USER END 202 break; 203 case WM_NOTIFICATION_SEL_CHANGED: 204 // USER START (Optionally insert code for reacting on notification message) 205 // USER END 206 break; 207 // USER START (Optionally insert additional code for further notification handling) 208 // USER END 209 } 210 break; 211 case ID_CHECKBOX_0: // Notifications sent by 'Checkbox' 212 switch(NCode) { 213 case WM_NOTIFICATION_CLICKED: 214 // USER START (Optionally insert code for reacting on notification message) 215 // USER END 216 break; 217 case WM_NOTIFICATION_RELEASED: 218 // USER START (Optionally insert code for reacting on notification message) 219 // USER END 220 break; 221 case WM_NOTIFICATION_VALUE_CHANGED: 222 // USER START (Optionally insert code for reacting on notification message) 223 // USER END 224 break; 225 // USER START (Optionally insert additional code for further notification handling) 226 // USER END 227 } 228 break; 229 case ID_BUTTON_0: // Notifications sent by 'Button' 230 switch(NCode) { 231 case WM_NOTIFICATION_CLICKED: 232 // USER START (Optionally insert code for reacting on notification message) 233 // USER END 234 break; 235 case WM_NOTIFICATION_RELEASED: 236 // USER START (Optionally insert code for reacting on notification message) 237 // USER END 238 break; 239 // USER START (Optionally insert additional code for further notification handling) 240 // USER END 241 } 242 break; 243 case ID_BUTTON_1: // Notifications sent by 'Button' 244 switch(NCode) { 245 case WM_NOTIFICATION_CLICKED: 246 // USER START (Optionally insert code for reacting on notification message) 247 // USER END 248 break; 249 case WM_NOTIFICATION_RELEASED: 250 // USER START (Optionally insert code for reacting on notification message) 251 // USER END 252 break; 253 // USER START (Optionally insert additional code for further notification handling) 254 // USER END 255 } 256 break; 257 case ID_SLIDER_0: // Notifications sent by 'Slider' 258 switch(NCode) { 259 case WM_NOTIFICATION_CLICKED: 260 // USER START (Optionally insert code for reacting on notification message) 261 // USER END 262 break; 263 case WM_NOTIFICATION_RELEASED: 264 // USER START (Optionally insert code for reacting on notification message) 265 // USER END 266 break; 267 case WM_NOTIFICATION_VALUE_CHANGED: 268 // USER START (Optionally insert code for reacting on notification message) 269 // USER END 270 break; 271 // USER START (Optionally insert additional code for further notification handling) 272 // USER END 273 } 274 break; 275 case ID_EDIT_0: // Notifications sent by 'Edit' 276 switch(NCode) { 277 case WM_NOTIFICATION_CLICKED: 278 // USER START (Optionally insert code for reacting on notification message) 279 // USER END 280 break; 281 case WM_NOTIFICATION_RELEASED: 282 // USER START (Optionally insert code for reacting on notification message) 283 // USER END 284 break; 285 case WM_NOTIFICATION_VALUE_CHANGED: 286 // USER START (Optionally insert code for reacting on notification message) 287 // USER END 288 break; 289 // USER START (Optionally insert additional code for further notification handling) 290 // USER END 291 } 292 break; 293 case ID_CHECKBOX_1: // Notifications sent by 'Checkbox' 294 switch(NCode) { 295 case WM_NOTIFICATION_CLICKED: 296 // USER START (Optionally insert code for reacting on notification message) 297 // USER END 298 break; 299 case WM_NOTIFICATION_RELEASED: 300 // USER START (Optionally insert code for reacting on notification message) 301 // USER END 302 break; 303 case WM_NOTIFICATION_VALUE_CHANGED: 304 // USER START (Optionally insert code for reacting on notification message) 305 // USER END 306 break; 307 // USER START (Optionally insert additional code for further notification handling) 308 // USER END 309 } 310 break; 311 case ID_CHECKBOX_2: // Notifications sent by 'Checkbox' 312 switch(NCode) { 313 case WM_NOTIFICATION_CLICKED: 314 // USER START (Optionally insert code for reacting on notification message) 315 // USER END 316 break; 317 case WM_NOTIFICATION_RELEASED: 318 // USER START (Optionally insert code for reacting on notification message) 319 // USER END 320 break; 321 case WM_NOTIFICATION_VALUE_CHANGED: 322 // USER START (Optionally insert code for reacting on notification message) 323 // USER END 324 break; 325 // USER START (Optionally insert additional code for further notification handling) 326 // USER END 327 } 328 break; 329 // USER START (Optionally insert additional code for further Ids) 330 // USER END 331 } 332 break; 333 // USER START (Optionally insert additional message handling) 334 // USER END 335 default: 336 WM_DefaultProc(pMsg); 337 break; 338 } 339 } 340 /*************************** End of file ****************************/ 341 342 /********************************************************************* 343 * 344 * MainTask 345 */ 346 void Fun(void) { 347 GUI_ExecDialogBox(_aDialogCreate, GUI_COUNTOF(_aDialogCreate),&_cbDialog, 0, 0, 0); 348 } 349 /* 350 创建对话框后,所有资源表中的小工具都将可见。尽管这些小工具在上面的屏幕截图中可见,但它们 351 是以 “空”的形式出现的。这是因为对话框过程函数尚未包含初始化单个元素的代码。小工具的初始 352 值、由它们所引起的行为以及它们之间的交互作用都需要在对话框过程中进行定义。 353 */