点击(此处)折叠或打开
#!/bin/bash
#JDK路径
export JAVA_HOME="/usr/jdk1.7.0_09"
#前缀路径
PREFIX="/data/webapp/apache-tomcat-80"
#起始编号
BEGIN=1
#终止编号
END=20
sudo chown -R ccapp:ccapp /data/webapp/apache-tomcat-80*
sudo chown -R ccapp:ccapp /usr/logs/*
#关闭
stop(){
for((i=$BEGIN;i
do
#抽取Tomcat进程号PID
#pid=`ps -ef | grep tomcat7-$i |grep -v 'grep' | awk '{print $2}'`
#测试当前进程是否处于活动状态
#test "$pid" != "" && kill $pid && echo "Stop tomcat7-$i Successful!" || echo "Stop tomcat7-$i Failed!"
if [ $i -lt 10 ]; then
#echo "tomcat7-0$i"
pid=`ps -ef | grep apache-tomcat-800$i/ |grep -v 'grep' | awk '{print $2}'`
test "$pid" != "" && sudo kill $pid && echo "Stop apache-tomcat-800$i Successful!" || echo "Stop apache-tomcat-800$i Failed!"
else
#echo "tomcat7-$i"
pid=`ps -ef | grep apache-tomcat-80$i/ |grep -v 'grep' | awk '{print $2}'`
test "$pid" != "" && sudo kill $pid && echo "Stop apache-tomcat-80$i Successful!" || echo "Stop apache-tomcat-80$i Failed!"
fi
sleep 1
done
#echo
}
#启动
start(){
for((i=$BEGIN;i
do
#启动Tomcat
#$PREFIX$i/bin/startup.sh && echo "Start tomcat7-$i Successful!"
#echo
if [ $i -lt 10 ]; then
#echo "tomcat7-0$i"
$PREFIX\0$i/bin/startup.sh && echo "Start apache-tomcat-800$i Successful!"
else
#echo "tomcat7-$i"
$PREFIX$i/bin/startup.sh && echo "Start apache-tomcat-80$i Successful!"
fi
sleep 1
done
}
status(){
for((i=$BEGIN;i
do
#抽取Tomcat进程号PID
#pid=`ps -ef | grep tomcat7-$i |grep -v 'grep' | awk '{print $2}'`
#打印PID
#echo "tomcat7-$i - $pid"
if [ $i -lt 10 ]; then
#echo "tomcat7-0$i"
#$PREFIX\810$i/bin/startup.sh && echo "Start tomcat7-810$i Successful!"
pid=`ps -ef | grep apache-tomcat-800$i/ |grep -v 'grep' | awk '{print $2}'`
echo "apache-tomcat-800$i - $pid"
else
#echo "tomcat7-$i"
#$PREFIX\81$i/bin/startup.sh && echo "Start tomcat7-81$i Successful!"
pid=`ps -ef | grep apache-tomcat-80$i/ |grep -v 'grep' | awk '{print $2}'`
echo "apache-tomcat-80$i - $pid"
fi
done
}
case "$1" in
start)
#echo "Start tomcat7-$BEGIN ~ tomcat7-$END"
#echo
start
#echo
;;
stop)
#echo "Stop tomcat7-$BEGIN ~ tomcat7-$END"
#echo
stop
#echo
;;
restart)
#echo "Restart tomcat7-$BEGIN ~ tomcat7-$END"
#echo
stop
sleep 2
start
#echo
;;
status)
#echo "Pid of tomcat7-$BEGIN ~ tomcat7-$END"
status
#echo
;;
*)
echo $"Usage: $0 {start|stop|restart|status}"
exit 1
;;
esac
Nginx自检脚本(每60秒自动检测一次)
点击(此处)折叠或打开
- #!/bin/bash
- prefix=/usr/local/nginx_1.4.6/sbin
- while :
- do
- nginxpid=`ps -C nginx --no-header | wc -l`
- if [ $nginxpid -eq 0 ]; then
- DATE=$(date +%Y-%m-%d %T)
- killall nginx && $prefix/nginx && echo "$DATE Restart Nginx successful~" || echo "$DATE Fail to restart Nginx!"
- sleep 60
- else
- DATE=$(date +%Y-%m-%d %T)
- echo "$DATE : Nginx_Check is running, everything is OK~"
- sleep 60
- fi
- done
点击(此处)折叠或打开
#!/bin/bash
#脚本说明
# 内容分发至各实例
#变更记录
#
#系统环境变量
PATH=/bin:/sbin:/usr/bin:/usr/sbin:/usr/local/bin:/usr/local/sbin:~/bin
export PATH
#自定义变量
bak=`date +%Y%m%d-%T`
prefix=/usr/
#tomcat_path=/usr/apache-tomcat-7.0.33/bin
project=APP
#begin=1
#end=15
#实例备份
cd $prefix
mkdir -p /home/user/$project/$bak
\cp -rf $project /home/user/$project/$bak
#根据实际情况修改,脚本参数如APP.zip解压后可以为APP的文件夹
#也可以是APP文件夹下的内容
cd /tmp/user/
rm -rf ${project}
mkdir $project
cp $project\.war ./$project
cd $project
unzip ${project}\.war
#unzip $1
cd ..
#chmod -R 755 $project
#分发copy,如果所有的工程都指向一个文件夹，则无需分发，直接拷贝
#for((i=$begin;i
#do
#根据需要增加覆盖copy的项目
# \cp -rf $project $prefix-$i/webapps/
#done
#rm -rf $prefix$project
cp -avpf $project\/* $prefix$project\/
#Tomcat操作留给其他功能模块控制
#cd $tomcat_path
#./shutdown.sh
#./startup.sh
echo "update successful!"
点击(此处)折叠或打开
#!/bin/bash
#前缀路径
PREFIX="/usr/TomcatSvr7-"
#起始编号
BEGIN=2
#终止编号
END=20
for((i=$BEGIN;i=$END;i++))
do
#删除历史记录
rm -rf $prefix$i/logs/*0*
cat /dev/null > $prefix$i/logs/catalina.out
done
#前缀路径
PREFIX="/usr/TomcatSvr7-"
#起始编号
BEGIN=2
#终止编号
END=20
for((i=$BEGIN;i=$END;i++))
do
#删除历史记录
rm -rf $prefix$i/logs/*0*
cat /dev/null > $prefix$i/logs/catalina.out
done
点击(此处)折叠或打开
logs_path=\"/usr/local/nginx_1.4.6/logs/\"
mv ${logs_path}www.log ${logs_path}www_$(date -d \"yesterday\" +\"%Y%m%d\").log
mv ${logs_path}error.log ${logs_path}error_$(date -d \"yesterday\" +\"%Y%m%d\").log
kill -HUP `cat ${logs_path}nginx.pid`
find $logs_path -name \"www_*log\" -mtime +0 -exec rm -rf {} ;
#find $logs_path -name \"access_*log\" -mtime +2 -exec rm -rf {} ;
find $logs_path -name \"error_*log\" -mtime +0 -exec rm -rf {} ;
自动配置LVM分区
点击(此处)折叠或打开
#!/bin/bash
DEV=/dev/sdb
VG=VG_DATA
LG=lv_data
DIR=/data
pvcreate $DEV \
&& vgcreate $VG $DEV \
&& lvcreate -l 100%PVS -n $LG $VG \
&& mkfs.ext4 /dev/$VG/$LG \
&& mkdir $DIR
&& mount /dev/$VG/$LG $DIR
Nginx配置
点击(此处)折叠或打开
server_tokens off;
sendfile on;
tcp_nopush on;
tcp_nodelay on;
keepalive_timeout 65;
client_header_timeout 10;
client_body_timeout 10;
reset_timedout_connection on;
send_timeout 10;
charset utf-8;
server_names_hash_bucket_size 128;
client_header_buffer_size 512k;
large_client_header_buffers 4 64k;
client_max_body_size 16m;
client_body_buffer_size 256k;
proxy_connect_timeout 60;
proxy_send_timeout 30;
proxy_read_timeout 30;
proxy_buffer_size 16k;
proxy_buffers 4 256k;
proxy_busy_buffers_size 512k;
proxy_temp_file_write_size 512k;
open_file_cache max=10240 inactive=20s;
open_file_cache_valid 30s;
open_file_cache_min_uses 10;
open_file_cache_errors on
Tomcat连接池配置
点击(此处)折叠或打开
port="5000"
protocol="org.apache.coyote.http11.Http11NioProtocol"
connectionTimeout="30000"
URIEncoding="UTF-8"
maxThreads="1000"
minSpareThreads="100"
acceptCount="300"
acceptorThreadCount="6"
keepAliveTimeout="120000"
maxKeepAliveRequests="1000"
enableLookups="false"
redirectPort="8443" />
点击(此处)折叠或打开
watch -n 1 "netstat -n | awk '/^tcp/ {++S[\$NF]} END {for(a in S) print a, S[a]}'"
远程切换Nginx
点击(此处)折叠或打开
#!/bin/bash
PORT1=8066
PORT2=10066
switch_to_8066(){
ssh 10.10.10.11 "/bin/bash /root/nginx_p$PORT1.sh;exit"
}
switch_to_10066(){
ssh 10.10.10.11 "/bin/bash /root/nginx_p$PORT2.sh;exit"
}
switch_to_all(){
ssh 10.10.10.11 "/bin/bash /root/nginx_all.sh;exit"
}
case "$1" in
switch_to_8066)
echo "switch nginx to port $PORT1"
switch_to_8066
echo "switch to port $PORT1 success"
;;
switch_to_10066)
echo "switch nginx to port $PORT2"
switch_to_10066
echo "switch to port $PORT2 success"
;;
switch_to_all)
echo "switch nginx to port $PORT1 and $PORT2"
switch_to_all
echo "switch to port $PORT2 and $PORT1 success"
;;
*)
echo $"Usage: $0 {switch_to_$PORT1|switch_to_$PORT2|switch_to_all}"
exit 1
;;
esac
点击(此处)折叠或打开
#!/bin/bash
NGINX_CONF=/usr/local/nginx_1.8.0/conf/
NGINX_SBIN=/usr/local/nginx_1.8.0/sbin/nginx
CONF_FILE=nginx_8066.conf
ps -ef | grep nginx |grep -v 'grep' |grep -v 'nginx_p8066.sh' | awk '{print $2}' | xargs kill
$NGINX_SBIN -c $NGINX_CONF$CONF_FILE
查看磁盘的TPS（每秒数据交换次数）
点击(此处)折叠或打开
iostat -d sda | grep sda | awk '{ print $2; }'
iostat -d | tail -n +4 | head -n -1 | awk '{s+=$2} END {print s}'
SVN自动发布(捡漏)
点击(此处)折叠或打开
#!/bin/bash
REMOTE_HOST1=192.168.1.100 REMOTE_USER1= REMOTE_PWD1= DIR=TEST PROJECT=TEST_PRO BRANCH=trunk SVN_URL=http://192.168.1.233/svn/ LOG=svn_file_change.log TMP_DIR=/home/test/ TARGET_DIR=/data/save/ if [ ! -d $TMP_DIR$DIR ]; then mkdir $TMP_DIR$DIR else echo "svn files is exist, script start......time : $(date -d today +%Y-%m-%d\ %H:%M:%S)" >> $TMP_DIR$LOG #rm -rf $TMP_DIR$DIR && echo "the old dir is deleted : $TMP_DIR$FILE, time : $(date -d today +%Y-%m-%d\ %H:%M:%S)" >> $TMP_DIR$LOG if [ $? -eq 0 ]; then svn co $SVN_URL$PROJECT/$BRANCH/$DIR if [ $? -eq 0 ]; then expect -c " spawn ssh $REMOTE_USER1@$REMOTE_HOST1 \"rm -rf $TARGET_DIR$DIR\" expect { \"*assword\" {set timeout 300; send \"$REMOTE_PWD1\r\";} \"yes/no\" {send \"yes\r\"; exp_continue;} } expect eof" expect -c " spawn scp -r $TMP_DIR$DIR $REMOTE_USER1@$REMOTE_HOST1:$TARGET_DIR expect { \"*assword\" {set timeout 300; send \"$REMOTE_PWD1\r\";} \"yes/no\" {send \"yes\r\"; exp_continue;} } expect eof" expect -c " spawn ssh $REMOTE_USER1@$REMOTE_HOST1 \"chown -R test:test $TARGET_DIR$DIR\" expect { \"*assword\" {set timeout 300; send \"$REMOTE_PWD1\r\";} \"yes/no\" {send \"yes\r\"; exp_continue;} } expect eof" #rm -rf $TMP_DIR$DIR else echo "svn error, can not copy the file!......" >> $TMP_DIR$LOG fi else echo "Unkown error......" >> $TMP_DIR$LOG fi fi
REMOTE_HOST1=192.168.1.100 REMOTE_USER1= REMOTE_PWD1= DIR=TEST PROJECT=TEST_PRO BRANCH=trunk SVN_URL=http://192.168.1.233/svn/ LOG=svn_file_change.log TMP_DIR=/home/test/ TARGET_DIR=/data/save/ if [ ! -d $TMP_DIR$DIR ]; then mkdir $TMP_DIR$DIR else echo "svn files is exist, script start......time : $(date -d today +%Y-%m-%d\ %H:%M:%S)" >> $TMP_DIR$LOG #rm -rf $TMP_DIR$DIR && echo "the old dir is deleted : $TMP_DIR$FILE, time : $(date -d today +%Y-%m-%d\ %H:%M:%S)" >> $TMP_DIR$LOG if [ $? -eq 0 ]; then svn co $SVN_URL$PROJECT/$BRANCH/$DIR if [ $? -eq 0 ]; then expect -c " spawn ssh $REMOTE_USER1@$REMOTE_HOST1 \"rm -rf $TARGET_DIR$DIR\" expect { \"*assword\" {set timeout 300; send \"$REMOTE_PWD1\r\";} \"yes/no\" {send \"yes\r\"; exp_continue;} } expect eof" expect -c " spawn scp -r $TMP_DIR$DIR $REMOTE_USER1@$REMOTE_HOST1:$TARGET_DIR expect { \"*assword\" {set timeout 300; send \"$REMOTE_PWD1\r\";} \"yes/no\" {send \"yes\r\"; exp_continue;} } expect eof" expect -c " spawn ssh $REMOTE_USER1@$REMOTE_HOST1 \"chown -R test:test $TARGET_DIR$DIR\" expect { \"*assword\" {set timeout 300; send \"$REMOTE_PWD1\r\";} \"yes/no\" {send \"yes\r\"; exp_continue;} } expect eof" #rm -rf $TMP_DIR$DIR else echo "svn error, can not copy the file!......" >> $TMP_DIR$LOG fi else echo "Unkown error......" >> $TMP_DIR$LOG fi fi
VIP
点击(此处)折叠或打开
/sbin/ip addr add 100.100.100.100/24 dev eth0
/sbin/ip addr del 100.100.100.100/24 dev eth0
/sbin/ip addr del 100.100.100.100/24 dev eth0