202. 菜鸟学习k8s安装1

2023-11-20 13:05:52

yum安装三个学习节点的ks

1. 修改hosts文件(all节点)
vim /etc/hosts
192.168.56.100 ydzs-master
192.168.56.101 ydzs-node1
192.168.56.102 ydzs-node2
	
for i in ydzs-node1 ydzs-node2; do scp /etc/hosts $i:/etc/; done
2.关闭防火墙(all节点)
[root@localhost ~]# systemctl stop firewalld
[root@localhost ~]# systemctl disable firewalld

[root@localhost ~]# setenforce 0
[root@localhost ~]# vim /etc/selinux/config   # 禁用selinux
[root@localhost ~]# cat /etc/selinux/config

# This file controls the state of SELinux on the system.
# SELINUX= can take one of these three values:
#     enforcing - SELinux security policy is enforced.
#     permissive - SELinux prints warnings instead of enforcing.
#     disabled - No SELinux policy is loaded.
SELINUX=disabled
# SELINUXTYPE= can take one of three values:
#     targeted - Targeted processes are protected,
#     minimum - Modification of targeted policy. Only selected processes are protected. 
#     mls - Multi Level Security protection.
SELINUXTYPE=targete
for i in ydzs-node1 ydzs-node2; do scp /etc/selinux/config $i:/etc/selinux/; done


3. master 节点做免密登录(master 节点)
[root@localhost ~]# ssh-keygen -t rsa
for i in ydzs-node1 ydzs-node2;do ssh-copy-id -i .ssh/id_rsa.pub $i;done


4.由于开启内核 ipv4 转发需要加载 br_netfilter 模块(all节点)
modprobe br_netfilter

5.创建/etc/sysctl.d/k8s.conf文件(all节点)
cat > /etc/sysctl.d/k8s.conf << EOF
net.bridge.bridge-nf-call-ip6tables = 1
net.bridge.bridge-nf-call-iptables = 1
net.ipv4.ip_forward = 1
EOF

加载一下
sysctl -p /etc/sysctl.d/k8s.conf


6.安装 ipvs(all节点)

cat > /etc/sysconfig/modules/ipvs.modules <<EOF
#!/bin/bash
modprobe -- ip_vs
modprobe -- ip_vs_rr
modprobe -- ip_vs_wrr
modprobe -- ip_vs_sh
modprobe -- nf_conntrack_ipv4
EOF

查看一下:
chmod 755 /etc/sysconfig/modules/ipvs.modules && bash /etc/sysconfig/modules/ipvs.modules && lsmod | grep -e ip_vs -e nf_conntrack_ipv4

7.配置yum源(master 节点)
# 其实就是阿里的yum源, 之后传输到其他两个node节点

[root@localhost ~]# cat /etc/yum.repos.d/base.repo 
[base]
name=CentOS-$releasever - Base - mirrors.aliyun.com
failovermethod=priority
baseurl=http://mirrors.aliyun.com/centos/$releasever/os/$basearch/
        http://mirrors.aliyuncs.com/centos/$releasever/os/$basearch/
        http://mirrors.cloud.aliyuncs.com/centos/$releasever/os/$basearch/
gpgcheck=1
gpgkey=http://mirrors.aliyun.com/centos/RPM-GPG-KEY-CentOS-7
 
#released updates 
[updates]
name=CentOS-$releasever - Updates - mirrors.aliyun.com
failovermethod=priority
baseurl=http://mirrors.aliyun.com/centos/$releasever/updates/$basearch/
        http://mirrors.aliyuncs.com/centos/$releasever/updates/$basearch/
        http://mirrors.cloud.aliyuncs.com/centos/$releasever/updates/$basearch/
gpgcheck=1
gpgkey=http://mirrors.aliyun.com/centos/RPM-GPG-KEY-CentOS-7
 
#additional packages that may be useful
[extras]
name=CentOS-$releasever - Extras - mirrors.aliyun.com
failovermethod=priority
baseurl=http://mirrors.aliyun.com/centos/$releasever/extras/$basearch/
        http://mirrors.aliyuncs.com/centos/$releasever/extras/$basearch/
        http://mirrors.cloud.aliyuncs.com/centos/$releasever/extras/$basearch/
gpgcheck=1
gpgkey=http://mirrors.aliyun.com/centos/RPM-GPG-KEY-CentOS-7
 
#additional packages that extend functionality of existing packages
[centosplus]
name=CentOS-$releasever - Plus - mirrors.aliyun.com
failovermethod=priority
baseurl=http://mirrors.aliyun.com/centos/$releasever/centosplus/$basearch/
        http://mirrors.aliyuncs.com/centos/$releasever/centosplus/$basearch/
        http://mirrors.cloud.aliyuncs.com/centos/$releasever/centosplus/$basearch/
gpgcheck=1
enabled=0
gpgkey=http://mirrors.aliyun.com/centos/RPM-GPG-KEY-CentOS-7
 
#contrib - packages by Centos Users
[contrib]
name=CentOS-$releasever - Contrib - mirrors.aliyun.com
failovermethod=priority
baseurl=http://mirrors.aliyun.com/centos/$releasever/contrib/$basearch/
        http://mirrors.aliyuncs.com/centos/$releasever/contrib/$basearch/
        http://mirrors.cloud.aliyuncs.com/centos/$releasever/contrib/$basearch/
gpgcheck=1
enabled=0
gpgkey=http://mirrors.aliyun.com/centos/RPM-GPG-KEY-CentOS-7

## rm -rf /etc/yum.repos.d/* 删除其他两个节点的yum文件
for i in ydzs-node1 ydzs-node2; do scp -r /etc/yum.repos.d/* $i:/etc/yum.repos.d/; done

8.同步时间(all)
$ yum install chrony -y
$ systemctl enable chronyd
$ systemctl start chronyd
$ chronyc sources

9.关闭交换分区(all)
swapoff -a
修改master节点的/etc/sysctl.d/k8s.conf加一行vm.swappiness=0, 传到其他节点
[root@localhost ~]# vim /etc/sysctl.d/k8s.conf
[root@localhost ~]# cat /etc/sysctl.d/k8s.conf
net.bridge.bridge-nf-call-ip6tables = 1
net.bridge.bridge-nf-call-iptables = 1
net.ipv4.ip_forward = 1
vm.swappiness=0

for i in ydzs-node1 ydzs-node2; do scp /etc/sysctl.d/k8s.conf $i:/etc/sysctl.d/; done
## 重新加载生效
sysctl -p /etc/sysctl.d/k8s.conf
	


10.安装docker(all)
yum install -y yum-utils device-mapper-persistent-data lvm2
## 配置docker仓库
yum-config-manager --add-repo http://mirrors.aliyun.com/docker-ce/linux/centos/docker-ce.repo
## 查看版本
yum list docker-ce --showduplicates | sort -r
## 同意安装一个版本
yum install docker-ce-18.09.9 -y


11.配置docker加速景象(all)
mkdir -p /etc/docker
cat > /etc/docker/daemon.json <<EOF
{
  "exec-opts": ["native.cgroupdriver=systemd"],
  "registry-mirrors" : [
    "https://ot2k4d59.mirror.aliyuncs.com/"
  ]
}
EOF

[root@localhost ~]# systemctl start docker
[root@localhost ~]# systemctl enable docker

12.安装 Kubeadm(all)
cat <<EOF > /etc/yum.repos.d/kubernetes.repo
[kubernetes]
name=Kubernetes
baseurl=http://mirrors.aliyun.com/kubernetes/yum/repos/kubernetes-el7-x86_64
enabled=1
gpgcheck=0
repo_gpgcheck=0
gpgkey=http://mirrors.aliyun.com/kubernetes/yum/doc/yum-key.gpg
        http://mirrors.aliyun.com/kubernetes/yum/doc/rpm-package-key.gpg
EOF

## 暂时--disableexcludes 禁掉除了kubernetes之外的别的仓库
yum install -y kubelet-1.16.2 kubeadm-1.16.2 kubectl-1.16.2 --disableexcludes=kubernetes
kubeadm version

systemctl enable --now kubelet


13.初始化集群(master)
# 生成默认配置文件, 修改如下内容
[root@ydzs-master ~]# kubeadm config print init-defaults > kubeadm.yaml
----------------------------分隔符start----------------------------------------
apiVersion: kubeadm.k8s.io/v1beta2
bootstrapTokens:
- groups:
  - system:bootstrappers:kubeadm:default-node-token
  token: abcdef.0123456789abcdef
  ttl: 24h0m0s
  usages:
  - signing
  - authentication
kind: InitConfiguration
localAPIEndpoint:
  advertiseAddress: 10.151.30.11  # apiserver 节点内网IP
  bindPort: 6443
nodeRegistration:
  criSocket: /var/run/dockershim.sock
  name: ydzs-master  # 默认读取当前master节点的hostname
  taints:
  - effect: NoSchedule
    key: node-role.kubernetes.io/master
---
apiServer:
  timeoutForControlPlane: 4m0s
apiVersion: kubeadm.k8s.io/v1beta2
certificatesDir: /etc/kubernetes/pki
clusterName: kubernetes
controllerManager: {}
dns:
  type: CoreDNS
etcd:
  local:
    dataDir: /var/lib/etcd
imageRepository: registry.aliyuncs.com/google_containers  # 修改成阿里云镜像源
kind: ClusterConfiguration
kubernetesVersion: v1.16.2
networking:
  dnsDomain: cluster.local
  podSubnet: 10.244.0.0/16  # Pod 网段，flannel插件需要使用这个网段
  serviceSubnet: 10.96.0.0/12
scheduler: {}
---
apiVersion: kubeproxy.config.k8s.io/v1alpha1
kind: KubeProxyConfiguration
mode: ipvs  # kube-proxy 模式
----------------------------分隔符end----------------------------------------
# 初始化集群, 复制最后几行等下要用到
[root@ydzs-master ~]# kubeadm init --config kubeadm.yaml
Your Kubernetes control-plane has initialized successfully!

To start using your cluster, you need to run the following as a regular user:

  mkdir -p $HOME/.kube
  sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
  sudo chown $(id -u):$(id -g) $HOME/.kube/config

You should now deploy a pod network to the cluster.
Run "kubectl apply -f [podnetwork].yaml" with one of the options listed at:
  https://kubernetes.io/docs/concepts/cluster-administration/addons/

Then you can join any number of worker nodes by running the following on each as root:

kubeadm join 192.168.56.100:6443 --token abcdef.0123456789abcdef \
    --discovery-token-ca-cert-hash sha256:05f3d2cefefc8fc5cf372ed7c0bfd220a1fed06dedf9ee5567b0459079cb6307 

[root@ydzs-master ~]# mkdir -p $HOME/.kube
[root@ydzs-master ~]# cp -i /etc/kubernetes/admin.conf $HOME/.kube/config 
[root@ydzs-master ~]# chown $(id -u):$(id -g) $HOME/.kube/config

# 复制master节点配置文件到其他节点
for i in ydzs-node1 ydzs-node2; do scp $HOME/.kube/config  $i:$HOME/.kube/; done

14.加入集群(node1,2节点配置)
kubeadm join 192.168.56.100:6443 --token abcdef.0123456789abcdef \
    --discovery-token-ca-cert-hash sha256:05f3d2cefefc8fc5cf372ed7c0bfd220a1fed06dedf9ee5567b0459079cb6307
	
[root@ydzs-master ~]# kubectl get nodes
NAME          STATUS     ROLES    AGE     VERSION
ydzs-master   NotReady   master   8m25s   v1.16.2
ydzs-node1    NotReady   <none>   16s     v1.16.2  # 发现都是NotReady是因为, 还没配置网络, 节点不能通信
ydzs-node2    NotReady   <none>   12s     v1.16.2


15.配置网络(master)
 wget https://raw.githubusercontent.com/coreos/flannel/2140ac876ef134e0ed5af15c65e414cf26827915/Documentation/kube-flannel.yml
 
# 搜索到名为 kube-flannel-ds-amd64 的 DaemonSet，在kube-flannel容器下面
$ vi kube-flannel.yml
......
containers:
- name: kube-flannel
  image: quay.io/coreos/flannel:v0.11.0-amd64
  command:
  - /opt/bin/flanneld
  args:
  - --ip-masq
  - --kube-subnet-mgr
  - --iface=eth1  # 指定你的master节点ip的网卡就行了, 我的ip在eth1上
......

# 加载网络插件
$ kubectl apply -f kube-flannel.yml  # 安装 flannel 网络插件
 
# 过一会查看所有节点都正常了ok
[root@ydzs-master ~]# kubectl get nodes
NAME          STATUS   ROLES    AGE   VERSION
ydzs-master   Ready    master   26m   v1.16.2
ydzs-node1    Ready    <none>   18m   v1.16.2
ydzs-node2    Ready    <none>   18m   v1.16.2


16.配置Dashboard
# 推荐使用下面这种方式
$ wget https://raw.githubusercontent.com/kubernetes/dashboard/v2.0.0-beta5/aio/deploy/recommended.yaml
$ vi recommended.yaml
# 修改Service为NodePort类型
......
kind: Service
apiVersion: v1
metadata:
  labels:
    k8s-app: kubernetes-dashboard
  name: kubernetes-dashboard
  namespace: kubernetes-dashboard
spec:
  ports:
    - port: 443
      targetPort: 8443
  selector:
    k8s-app: kubernetes-dashboard
  type: NodePort  # 加上type=NodePort变成NodePort类型的服务
......

直接创建：
$ kubectl apply -f recommended.yaml

[root@ydzs-master ~]# kubectl get pods -n kubernetes-dashboard -l k8s-app=kubernetes-dashboard
NAME                                    READY   STATUS    RESTARTS   AGE
kubernetes-dashboard-6b86b44f87-rqrvl   1/1     Running   0          93s
No resources found in kubernetes-dashborad namespace.
[root@ydzs-master ~]# kubectl get svc -n kubernetes-dashboard
NAME                        TYPE        CLUSTER-IP       EXTERNAL-IP   PORT(S)         AGE
dashboard-metrics-scraper   ClusterIP   10.107.237.138   <none>        8000/TCP        2m23s
kubernetes-dashboard        NodePort    10.101.215.176   <none>        443:30159/TCP   2m23s

# 使用火狐访问https://master节点ip:30159

$ kubectl apply -f admin.yaml
$ kubectl get secret -n kubernetes-dashboard|grep admin-token
admin-token-lwmmx                  kubernetes.io/service-account-token   3         1d
$ kubectl get secret admin-token-lwmmx -o jsonpath={.data.token} -n kubernetes-dashboard |base64 -d# 会生成一串很长的base64后的字符串

拿到这个token去火狐打开的页面输入

17.清理
清理¶
如果你的集群安装过程中遇到了其他问题，我们可以使用下面的命令来进行重置：


$ kubeadm reset
$ ifconfig cni0 down && ip link delete cni0
$ ifconfig flannel.1 down && ip link delete flannel.1
$ rm -rf /var/lib/cni/

全部参考: https://www.qikqiak.com/ 优点知识, 阳明老师的博客

上一篇：SAP-Bassic 传输请求对象描述


下一篇：警告：sun.misc.BASE64Decoder 是 Sun 的专用 API，可能会在未来版本中删