NX9+VS2012

#include <uf.h>
#include <uf_ui.h>
#include <uf_ncgroup.h>
#include <uf_setup.h>
#include <uf_ui_ont.h>
#include <uf_obj.h>
#include <uf_param.h>
#include <uf_param_indices.h>
#include <uf_oper.h>


UF_initialize();

//获取当前NX的加工设置TAG
tag_t setup_tag = NULL_TAG;
UF_SETUP_ask_setup(&setup_tag);
if (setup_tag == NULL_TAG)
{
    uc1601("提示:请先初始化加工环境!", 1);
    return;
}

//获得当前程序视图的根节点
tag_t programRootGroup=NULL_TAG;
UF_SETUP_ask_program_root(setup_tag, &programRootGroup);

//创建程序组
tag_t newProgTag=NULL_TAG;
UF_NCPROG_create("mill_planar" ,"PROGRAM", &newProgTag);
UF_OBJ_set_name(newProgTag, "newProg");
UF_NCGROUP_accept_member(programRootGroup, newProgTag);

//获得机床视图的根节点
tag_t mctRootgroup=NULL_TAG;
UF_SETUP_ask_mct_root(setup_tag, &mctRootgroup);

//创建新的刀具
tag_t newToolTag=NULL_TAG;
UF_CUTTER_create("mill_planar", "MILL", &newToolTag);
UF_OBJ_set_name(newToolTag, "D16");    
UF_NCGROUP_accept_member(mctRootgroup, newToolTag);
//修改刀具的直径
UF_PARAM_set_double_value(newToolTag, UF_PARAM_TL_DIAMETER, 16.0);

//获得几何视图下的根节点
tag_t geomRootgroup=NULL_TAG;
UF_SETUP_ask_geom_root(setup_tag, &geomRootgroup);

//创建加工坐标系几何
tag_t newMcsTag=NULL_TAG;
UF_NCGEOM_create("mill_planar", "MCS", &newMcsTag);
UF_OBJ_set_name(newMcsTag, "newMcs");    
UF_NCGROUP_accept_member(geomRootgroup, newMcsTag);

//获得加工方法视图的根节点
tag_t mthdRootgroup=NULL_TAG;
UF_SETUP_ask_mthd_root(setup_tag, &mthdRootgroup);

//创建操作
tag_t newOperTag=NULL_TAG;
UF_OPER_create("mill_planar", "PLANAR_MILL", &newOperTag);

//插入操作得到4个组里面
UF_NCGROUP_accept_member(newProgTag, newOperTag);
UF_NCGROUP_accept_member(newToolTag, newOperTag);
UF_NCGROUP_accept_member(newMcsTag, newOperTag);
UF_NCGROUP_accept_member(mthdRootgroup, newOperTag);

//刷新加工导航器
UF_UI_ONT_refresh();

UF_terminate();

Caesar卢尚宇
2020年5月12日