单片机:数码管显示计时,LED0 1 1秒一闪 LED2 3 1分一闪 LED5 LED6 1小时一闪 K1 K2调整时 K3 K4调整分钟

#include<reg51.h>
#define uchar unsigned char;
#define uint unsigned int;
uchar position;           
uchar tt,bz1=0,bz2=0;             
uchar second;       
uchar minute;
uchar hour;       
uchar code table[]={0xc0,0xf9,0xa4,0xb0,0x99,0x92,0x82,0xf8,0x80,0x90};//0--9
sbit smg_q = P2^0; 
sbit smg_b = P2^1; 
sbit smg_s = P2^2;
sbit smg_g = P2^3;
sbit key1=P3^2;                 
sbit key2=P3^3;
sbit key3=P3^4;
sbit key4=P3^5;
sbit led1=P1^0;
sbit led2=P1^1;
sbit led3=P1^2;
sbit led4=P1^3;
sbit led5=P1^4;
sbit led6=P1^5;
void keyscan();                   
void display(unsigned char hour,unsigned char minute);
void delay(unsigned int timer);
void init(); 
void main()
{
    init();                                    
   while(1)
      {
       if(tt==20)
         { 
                     led1=~led1;led2=~led2;
                     if (bz1==1 )
                            {
                                led3=~led3;led4=~led4;
                                bz1=0;                         
                            }
                    if (bz2==1 )
                            {
                                led5=~led5;led6=~led6;
                                bz2=0;                         
                            }    
           tt=0;
           second++;
          if(second==60)
              {
                                led3=~led3;led4=~led4;
                                bz1=1;
                second=0;
                minute++;
               if(minute==60)
                 {      
                                    led5=~led5;led6=~led6;
                                     bz2=1;
                   minute=0;
                   hour++;
                   if(hour==24)
                       hour=0;
                  }
               }
           }
           keyscan();
           display(hour,minute);      
          delay(1);
         }
}
void keyscan()
{  if(key1==0)     
     {
      TR0=0;
      hour++;
      if(hour==24)
          hour=0;
      delay(200)        ;
      TR0=1;
      }
   if(key2==0)               
     {TR0=0;
      hour--;
     if(hour<0)
       hour=23;
     delay(200)        ;
    TR0=1;
     }
  if(key3==0)    
    {
     TR0=0;
     minute++;
    if(minute==60)
       minute=0;
    delay(200)        ;
    TR0=1;
    }
  if(key4==0)          
   {
    TR0=0;
    minute--;
    if(minute<0)
       minute=59;
   delay(200)        ;
   TR0=1;
   }
}
void init()
{
    tt=0;
    position=0;               
    second=0; 
    minute=0;        
    hour=0;   
    smg_q=1;
    smg_b=1;
    smg_s=1;
    smg_g=1;
    key1=1;
    key2=1;
    TMOD=0X01;  
    TH0=0x4c;        
    TL0=0x00;
    EA=1;                
    ET0=1;              
    TR0=1;              
}
void t0() interrupt 1
{
  TH0=0x4c;        
  TL0=0x00;
  tt++;

}
void display(unsigned char hour,unsigned char minute)
{     P0=0XFF;                             
      switch(position)
      {
       case 0:   smg_g=1;smg_q=0;P0=table[hour/10]; break;
       case 1:   smg_q=1;smg_b=0; P0=table[hour%10];if(tt>=10) P0&=0x7f; break;
       case 2:   smg_b=1;smg_s=0;P0=table[minute/10];break;
       case 3:   smg_s=1;smg_g=0;P0=table[minute%10];break;
       }
      position++;               
      if(position>3)
          position=0;      
}
void delay(unsigned int time)
{                
   unsigned int x,y;
   for(x=time;x>0;x--)
     for(y=110;y>0;y--);
}

 

上一篇:基于Linux和4412处理器实现SPI接口的RF控制


下一篇:OpenCV学习笔记04_图像的存储原理