SelectFromModel函数的简介
SelectFromModel is a meta-transformer that can be used along with any estimator that has a coef_ or feature_importances_ attribute after fitting. The features are considered unimportant and removed, if the corresponding coef_ or feature_importances_ values are below the provided threshold parameter. Apart from specifying the threshold numerically, there are built-in heuristics for finding a threshold using a string argument. Available heuristics are “mean”, “median” and float multiples of these like “0.1*mean”.
SelectFromModel是一个元转换器，可以与任何在拟合后具有coef_或feature_importances_属性的estimator 一起使用。如果相应的coef_或feature_importances_值低于提供的阈值参数，则认为这些特性不重要并将其删除。除了以数字方式指定阈值外，还有使用字符串参数查找阈值的内置启发式方法。可用的试探法是“平均数”、“中位数”和这些数的浮点倍数，如“0.1*平均数”。
"""Meta-transformer for selecting features based on importance weights. .. versionadded:: 0.17
用于根据重要性权重来选择特征的元转换器。
. .加入在0.17版本::
Parameters
----------
estimator : object
The base estimator from which the transformer is built.
This can be both a fitted (if ``prefit`` is set to True)
or a non-fitted estimator. The estimator must have either a
``feature_importances_`` or ``coef_`` attribute after fitting.
threshold : string, float, optional default None
The threshold value to use for feature selection. Features whose
importance is greater or equal are kept while the others are
discarded. If "median" (resp. "mean"), then the ``threshold`` value is
the median (resp. the mean) of the feature importances. A scaling
factor (e.g., "1.25*mean") may also be used. If None and if the
estimator has a parameter penalty set to l1, either explicitly
or implicitly (e.g, Lasso), the threshold used is 1e-5.
Otherwise, "mean" is used by default.
prefit : bool, default False
Whether a prefit model is expected to be passed into the constructor
directly or not. If True, ``transform`` must be called directly
and SelectFromModel cannot be used with ``cross_val_score``,
``GridSearchCV`` and similar utilities that clone the estimator.
Otherwise train the model using ``fit`` and then ``transform`` to do
feature selection.
norm_order : non-zero int, inf, -inf, default 1
Order of the norm used to filter the vectors of coefficients below
``threshold`` in the case where the ``coef_`` attribute of the
estimator is of dimension 2.
参数
estimator ：对象类型，
建立转换的基本estimator 。
这可以是一个拟合(如果' ' prefit ' '被设置为True) 或者非拟合的estimator。在拟合之后，estimator 必须有' ' feature_importances_ ' '或' ' coef_ ' '属性。
threshold ：字符串，浮点类型，可选的，默认无
用于特征选择的阈值。重要性大于或等于的特征被保留，其他特征被丢弃。如果“中位数”(分别地。(“均值”)，则“阈值”为中位数(resp，特征重要性的平均值)。也可以使用比例因子(例如“1.25*平均值”)。如果没有，并且估计量有一个参数惩罚设置为l1，不管是显式的还是隐式的(例如Lasso)，阈值为1e-5。否则，默认使用“mean”。
prefit: bool，默认为False
prefit模型是否应直接传递给构造函数。如果为True，则必须直接调用“transform”，SelectFromModel不能与cross_val_score 、GridSearchCV以及类似的克隆估计器的实用程序一起使用。否则，使用' ' fit ' '和' ' transform ' '训练模型进行特征选择。
norm_order:非零整型，inf， -inf，默认值1
在estimator的' coef_ 属性为2维的情况下，用于过滤' '阈值' '以下系数的向量的范数的顺序。
Attributes
----------
estimator_ : an estimator
The base estimator from which the transformer is built.
This is stored only when a non-fitted estimator is passed to the
``SelectFromModel``, i.e when prefit is False.
threshold_ : float
The threshold value used for feature selection.
"""
属性
estimator_：一个estimator。
建立转换器的基estimator，只有在将非拟合估计量传递给SelectFromModel 时，才会存储它。当prefit 为假时。
threshold_ ：浮点类型
用于特征选择的阈值。
1、使用SelectFromModel和LassoCV进行特征选择
# Author: Manoj Kumar <mks542@nyu.edu>
# License: BSD 3 clause
print(__doc__)
import matplotlib.pyplot as plt
import numpy as np
from sklearn.datasets import load_boston
from sklearn.feature_selection import SelectFromModel
from sklearn.linear_model import LassoCV
# Load the boston dataset.
X, y = load_boston(return_X_y=True)
# We use the base estimator LassoCV since the L1 norm promotes sparsity of features.
clf = LassoCV()
# Set a minimum threshold of 0.25
sfm = SelectFromModel(clf, threshold=0.25)
sfm.fit(X, y)
n_features = sfm.transform(X).shape[1]
# Reset the threshold till the number of features equals two.
# Note that the attribute can be set directly instead of repeatedly
# fitting the metatransformer.
while n_features > 2:
sfm.threshold += 0.1
X_transform = sfm.transform(X)
n_features = X_transform.shape[1]
# Plot the selected two features from X.
plt.title(
"Features selected from Boston using SelectFromModel with "
"threshold %0.3f." % sfm.threshold)
feature1 = X_transform[:, 0]
feature2 = X_transform[:, 1]
plt.plot(feature1, feature2, 'r.')
plt.xlabel("Feature number 1")
plt.ylabel("Feature number 2")
plt.ylim([np.min(feature2), np.max(feature2)])
plt.show()