一、背景
对登录一个系统，快速查看其系统信息，检查系统各项指标及参数，编写系统快速检查脚本，输出系统信息到脚本运行的logs目录下。
二、脚本
#!/bin/bash
# auth:kaliarch
# func:sys info check
# version:v1.0
# sys:centos6.x/7.x
[ $(id -u) -gt 0 ] && echo "请用root用户执行此脚本！" && exit 1
sysversion=$(rpm -q centos-release|cut -d- -f3)
line="-------------------------------------------------"
[ -d logs ] || mkdir logs
sys_check_file="logs/$(ip a show dev eth0|grep -w inet|awk '{print $2}'|awk -F '/' '{print $1}')-`date +%Y%m%d`.txt"
# 获取系统cpu信息
function get_cpu_info() {
Physical_CPUs=$(grep "physical id" /proc/cpuinfo| sort | uniq | wc -l)
Virt_CPUs=$(grep "processor" /proc/cpuinfo | wc -l)
CPU_Kernels=$(grep "cores" /proc/cpuinfo|uniq| awk -F ': ' '{print $2}')
CPU_Type=$(grep "model name" /proc/cpuinfo | awk -F ': ' '{print $2}' | sort | uniq)
CPU_Arch=$(uname -m)
cat <<EOF | column -t
CPU信息:
物理CPU个数: $Physical_CPUs
逻辑CPU个数: $Virt_CPUs
每CPU核心数: $CPU_Kernels
CPU型号: $CPU_Type
CPU架构: $CPU_Arch
EOF
}
# 获取系统内存信息
function get_mem_info() {
check_mem=$(free -m)
MemTotal=$(grep MemTotal /proc/meminfo| awk '{print $2}') #KB
MemFree=$(grep MemFree /proc/meminfo| awk '{print $2}') #KB
let MemUsed=MemTotal-MemFree
MemPercent=$(awk "BEGIN {if($MemTotal==0){printf 100}else{printf \"%.2f\",$MemUsed*100/$MemTotal}}")
report_MemTotal="$((MemTotal/1024))""MB" #内存总容量(MB)
report_MemFree="$((MemFree/1024))""MB" #内存剩余(MB)
report_MemUsedPercent="$(awk "BEGIN {if($MemTotal==0){printf 100}else{printf \"%.2f\",$MemUsed*100/$MemTotal}}")""%" #内存使用率%
cat <<EOF
内存信息：
${check_mem}
EOF
}
# 获取系统网络信息
function get_net_info() {
pri_ipadd=$(ip a show dev eth0|grep -w inet|awk '{print $2}'|awk -F '/' '{print $1}')
pub_ipadd=$(curl ifconfig.me -s)
gateway=$(ip route | grep default | awk '{print $3}')
mac_info=$(ip link| egrep -v "lo"|grep link|awk '{print $2}')
dns_config=$(egrep -v "^$|^#" /etc/resolv.conf)
route_info=$(route -n)
cat <<EOF | column -t
IP信息:
系统公网地址: ${pub_ipadd}
系统私网地址: ${pri_ipadd}
网关地址: ${gateway}
MAC地址: ${mac_info}
路由信息:
${route_info}
DNS 信息:
${dns_config}
EOF
}
# 获取系统磁盘信息
function get_disk_info() {
disk_info=$(fdisk -l|grep "Disk /dev"|cut -d, -f1)
disk_use=$(df -hTP|awk '$2!="tmpfs"{print}')
disk_inode=$(df -hiP|awk '$1!="tmpfs"{print}')
cat <<EOF
磁盘信息:
${disk_info}
磁盘使用:
${disk_use}
inode信息:
${disk_inode}
EOF
}
# 获取系统信息
function get_systatus_info() {
sys_os=$(uname -o)
sys_release=$(cat /etc/redhat-release)
sys_kernel=$(uname -r)
sys_hostname=$(hostname)
sys_selinux=$(getenforce)
sys_lang=$(echo $LANG)
sys_lastreboot=$(who -b | awk '{print $3,$4}')
sys_runtime=$(uptime |awk '{print $3,$4}'|cut -d, -f1)
sys_time=$(date)
sys_load=$(uptime |cut -d: -f5)
cat <<EOF | column -t
系统信息:
系统: ${sys_os}
发行版本: ${sys_release}
系统内核: ${sys_kernel}
主机名: ${sys_hostname}
selinux状态: ${sys_selinux}
系统语言: ${sys_lang}
系统当前时间: ${sys_time}
系统最后重启时间: ${sys_lastreboot}
系统运行时间: ${sys_runtime}
系统负载: ${sys_load}
EOF
}
# 获取服务信息
function get_service_info() {
port_listen=$(netstat -lntup|grep -v "Active Internet")
kernel_config=$(sysctl -p 2>/dev/null)
if [ ${sysversion} -gt 6 ];then
service_config=$(systemctl list-unit-files --type=service --state=enabled|grep "enabled")
run_service=$(systemctl list-units --type=service --state=running |grep ".service")
else
service_config=$(/sbin/chkconfig | grep -E ":on|:启用" |column -t)
run_service=$(/sbin/service --status-all|grep -E "running")
fi
cat <<EOF
服务启动配置:
${service_config}
${line}
运行的服务:
${run_service}
${line}
监听端口:
${port_listen}
${line}
内核参考配置:
${kernel_config}
EOF
}
function get_sys_user() {
login_user=$(awk -F: '{if ($NF=="/bin/bash") print $0}' /etc/passwd)
ssh_config=$(egrep -v "^#|^$" /etc/ssh/sshd_config)
sudo_config=$(egrep -v "^#|^$" /etc/sudoers |grep -v "^Defaults")
host_config=$(egrep -v "^#|^$" /etc/hosts)
crond_config=$(for cronuser in /var/spool/cron/* ;do ls ${cronuser} 2>/dev/null|cut -d/ -f5;egrep -v "^$|^#" ${cronuser} 2>/dev/null;echo "";done)
cat <<EOF
系统登录用户:
${login_user}
${line}
ssh 配置信息:
${ssh_config}
${line}
sudo 配置用户:
${sudo_config}
${line}
定时任务配置:
${crond_config}
${line}
hosts 信息:
${host_config}
EOF
}
function process_top_info() {
top_title=$(top -b n1|head -7|tail -1)
cpu_top10=$(top b -n1 | head -17 | tail -10)
mem_top10=$(top -b n1|head -17|tail -10|sort -k10 -r)
cat <<EOF
CPU占用top10:
${top_title}
${cpu_top10}
内存占用top10:
${top_title}
${mem_top10}
EOF
}
function sys_check() {
get_cpu_info
echo ${line}
get_mem_info
echo ${line}
get_net_info
echo ${line}
get_disk_info
echo ${line}
get_systatus_info
echo ${line}
get_service_info
echo ${line}
get_sys_user
echo ${line}
process_top_info
}
sys_check > ${sys_check_file}
三、测试
检查的信息如下
CPU信息:
物理CPU个数: 1
逻辑CPU个数: 2
每CPU核心数: 2
CPU型号: QEMU Virtual CPU version 2.3.0
CPU架构: x86_64
-------------------------------------------------
内存信息：
total used free shared buff/cache available
Mem: 1839 117 1292 8 428 1526
Swap: 2047 0 2047
-------------------------------------------------
IP信息:
系统公网地址: 103.21.119.220
系统私网地址: 10.234.1.160
网关地址: 10.234.1.254
MAC地址: fa:de:19:ea:54:00
路由信息:
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
0.0.0.0 10.234.1.254 0.0.0.0 UG 100 0 0 eth0
10.234.1.0 0.0.0.0 255.255.255.0 U 100 0 0 eth0
DNS 信息:
nameserver 114.114.114.114
-------------------------------------------------
磁盘信息:
Disk /dev/vda: 21.5 GB
Disk /dev/mapper/cl-root: 18.2 GB
Disk /dev/mapper/cl-swap: 2147 MB
磁盘使用:
Filesystem Type Size Used Avail Use% Mounted on
/dev/mapper/cl-root xfs 17G 1.2G 16G 7% /
devtmpfs devtmpfs 910M 0 910M 0% /dev
/dev/vda1 xfs 1014M 138M 877M 14% /boot
inode信息:
Filesystem Inodes IUsed IFree IUse% Mounted on
/dev/mapper/cl-root 8.5M 32K 8.5M 1% /
devtmpfs 228K 403 227K 1% /dev
/dev/vda1 512K 330 512K 1% /boot
-------------------------------------------------
系统信息:
系统: GNU/Linux
发行版本: CentOS Linux release 7.3.1611 (Core)
系统内核: 3.10.0-514.el7.x86_64
主机名: 10-234-1-160
selinux状态: Permissive
系统语言: en_US.UTF-8
系统当前时间: Wed Oct 24 10:30:59 CST 2018
系统最后重启时间: 2018-10-23 12:07
系统运行时间: 22:23
系统负载: 0.00, 0.01, 0.05
-------------------------------------------------
服务启动配置:
auditd.service enabled
autovt@.service enabled
crond.service enabled
dbus-org.fedoraproject.FirewallD1.service enabled
dbus-org.freedesktop.NetworkManager.service enabled
dbus-org.freedesktop.nm-dispatcher.service enabled
firewalld.service enabled
getty@.service enabled
irqbalance.service enabled
kdump.service enabled
lvm2-monitor.service enabled
microcode.service enabled
NetworkManager-dispatcher.service enabled
NetworkManager.service enabled
postfix.service enabled
qemu-guest-agent.service enabled
rsyslog.service enabled
sshd.service enabled
systemd-readahead-collect.service enabled
systemd-readahead-drop.service enabled
systemd-readahead-replay.service enabled
tuned.service enabled
-------------------------------------------------
运行的服务:
auditd.service loaded active running Security Auditing Service
crond.service loaded active running Command Scheduler
dbus.service loaded active running D-Bus System Message Bus
firewalld.service loaded active running firewalld - dynamic firewall daemon
getty@tty1.service loaded active running Getty on tty1
irqbalance.service loaded active running irqbalance daemon
lvm2-lvmetad.service loaded active running LVM2 metadata daemon
NetworkManager.service loaded active running Network Manager
polkit.service loaded active running Authorization Manager
postfix.service loaded active running Postfix Mail Transport Agent
qemu-guest-agent.service loaded active running QEMU Guest Agent
rsyslog.service loaded active running System Logging Service
sshd.service loaded active running OpenSSH server daemon
systemd-journald.service loaded active running Journal Service
systemd-logind.service loaded active running Login Service
systemd-udevd.service loaded active running udev Kernel Device Manager
tuned.service loaded active running Dynamic System Tuning Daemon
-------------------------------------------------
监听端口:
Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name
tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 1217/sshd
tcp 0 0 127.0.0.1:25 0.0.0.0:* LISTEN 1998/master
tcp6 0 0 :::22 :::* LISTEN 1217/sshd
tcp6 0 0 ::1:25 :::* LISTEN 1998/master
udp 0 0 0.0.0.0:8900 0.0.0.0:* 739/dhclient
udp 0 0 0.0.0.0:68 0.0.0.0:* 739/dhclient
udp6 0 0 :::60097 :::* 739/dhclient
-------------------------------------------------
内核参考配置:
kernel.msgmnb = 65536
kernel.msgmax = 65536
kernel.shmmax = 68719476736
kernel.shmall = 4294967296
net.ipv4.tcp_syncookies = 1
net.ipv4.tcp_syn_retries = 1
net.ipv4.tcp_tw_recycle = 1
net.ipv4.tcp_tw_reuse = 1
net.ipv4.tcp_fin_timeout = 1
net.ipv4.tcp_keepalive_time = 1200
net.ipv4.ip_local_port_range = 1024 65535
net.ipv6.conf.all.disable_ipv6 = 1
-------------------------------------------------
系统登录用户:
root:x:0:0:root:/root:/bin/bash
-------------------------------------------------
ssh 配置信息:
HostKey /etc/ssh/ssh_host_rsa_key
HostKey /etc/ssh/ssh_host_ecdsa_key
HostKey /etc/ssh/ssh_host_ed25519_key
SyslogFacility AUTHPRIV
AuthorizedKeysFile .ssh/authorized_keys
PasswordAuthentication yes
ChallengeResponseAuthentication no
GSSAPIAuthentication yes
GSSAPICleanupCredentials no
UsePAM yes
X11Forwarding yes
UsePrivilegeSeparation sandbox # Default for new installations.
AcceptEnv LANG LC_CTYPE LC_NUMERIC LC_TIME LC_COLLATE LC_MONETARY LC_MESSAGES
AcceptEnv LC_PAPER LC_NAME LC_ADDRESS LC_TELEPHONE LC_MEASUREMENT
AcceptEnv LC_IDENTIFICATION LC_ALL LANGUAGE
AcceptEnv XMODIFIERS
Subsystem sftp /usr/libexec/openssh/sftp-server
-------------------------------------------------
sudo 配置用户:
root ALL=(ALL) ALL
%wheel ALL=(ALL) ALL
-------------------------------------------------
定时任务配置:
root
1 1 * * * /bin/bash /usr/scripts/IP_iptables.sh
1 1 * * 0 /usr/sbin/ntpdate time1.aliyun.com
30 8 * * 1 /bin/bash /data/blsexcle/rds_bak.sh
-------------------------------------------------
hosts 信息:
127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4
::1 localhost localhost.localdomain localhost6 localhost6.localdomain6
10.234.1.150 10-234-1-150
-------------------------------------------------
CPU占用top10:
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
1 root 20 0 128092 6644 3888 S 0.0 0.4 0:05.30 systemd
2 root 20 0 0 0 0 S 0.0 0.0 0:00.04 kthreadd
3 root 20 0 0 0 0 S 0.0 0.0 0:00.01 ksoftirqd/0
6 root 20 0 0 0 0 S 0.0 0.0 0:00.37 kworker/u4:0
7 root rt 0 0 0 0 S 0.0 0.0 0:00.02 migration/0
8 root 20 0 0 0 0 S 0.0 0.0 0:00.00 rcu_bh
9 root 20 0 0 0 0 S 0.0 0.0 0:01.97 rcu_sched
10 root rt 0 0 0 0 S 0.0 0.0 0:00.57 watchdog/0
11 root rt 0 0 0 0 S 0.0 0.0 0:00.45 watchdog/1
12 root rt 0 0 0 0 S 0.0 0.0 0:00.03 migration/1
内存占用top10:
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
1 root 20 0 128092 6644 3888 S 0.0 0.4 0:05.30 systemd
9 root 20 0 0 0 0 S 0.0 0.0 0:01.97 rcu_sched
10 root rt 0 0 0 0 S 0.0 0.0 0:00.57 watchdog/0
11 root rt 0 0 0 0 S 0.0 0.0 0:00.45 watchdog/1
6 root 20 0 0 0 0 S 0.0 0.0 0:00.37 kworker/u4:0
2 root 20 0 0 0 0 S 0.0 0.0 0:00.04 kthreadd
12 root rt 0 0 0 0 S 0.0 0.0 0:00.03 migration/1
7 root rt 0 0 0 0 S 0.0 0.0 0:00.02 migration/0
3 root 20 0 0 0 0 S 0.0 0.0 0:00.01 ksoftirqd/0
8 root 20 0 0 0 0 S 0.0 0.0 0:00.00 rcu_bh