mkdir /tmp/dcos && cd /tmp/dcos

curl -O https://downloads.dcos.io/dcos/EarlyAccess/dcos_generate_config.sh #这个有点久哈 550M

├── dcos-genconf.14509fe1e7899f4395-3a2b7e03c45cd615da.tar

├── dcos_generate_config.sh

└── genconf

    ├── config.yaml

    └── ip-detect

---

bootstrap_url: http://192.168.1.58:8080 #这个是配置服务器的地址，等会要从这里面下载内容

cluster_name: 'DC/OS' #名称

exhibitor_storage_backend: static #存储方式

ip_detect_filename: /genconf/ip-detect #路由检测，应该是哈

master_list:

- 192.168.1.100 #主机地址

resolvers:

- 192.168.1.254 #这个是dns

- 119.6.6.6 #这个是

oauth_enabled: 'false' #这个是验证，最好关闭，因为是内网，读者可以开启哈，

telemetry_enabled: 'false'#这个也是验证

#!/usr/bin/env bash

set -o nounset -o errexit

export PATH=/usr/sbin:/usr/bin:$PATH

echo $(ip addr show enp0s8 | grep -Eo '[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}' | head -)

bash dcos_generate_config.sh #放生全局的配置信息
docker run -d -p 8080:80 --name nginx -v $PWD/genconf/serve:/usr/share/nginx/html:ro index.alauda.cn/library/nginx #这个是放到容器里面了
########这个可以测试一下，可以问题了不，我映射的是8080端口,服务器的地址是 192.168.1.58:8080 这个是主服务器的配置地址

$ ssh root@192.168.1.100 #连接到master上面

$ mkdir /tmp/dcos && cd /tmp/dcos #放到临时目录下面哈

$ curl -O http://192.168.1.58:8080/dcos_install.sh #下载刚才的文件

[root@localhost dcos]# bash dcos_install.sh master

Starting DC/OS Install Process

Running preflight checks

Checking if DC/OS is already installed: PASS (Not installed)

PASS Is SELinux disabled?

Checking if docker is installed and in PATH: PASS

Checking docker version requirement (>= 1.6): PASS (1.9.)

Checking if curl is installed and in PATH: PASS

Checking if bash is installed and in PATH: PASS

Checking if ping is installed and in PATH: PASS

Checking if tar is installed and in PATH: PASS

Checking if xz is installed and in PATH: PASS

Checking if unzip is installed and in PATH: PASS

Checking if ipset is installed and in PATH: PASS

Checking if systemd-notify is installed and in PATH: PASS

Checking if systemd is installed and in PATH: PASS

Checking systemd version requirement (>= ): PASS ()

Checking if group 'nogroup' exists: PASS

Checking if port  (required by mesos-ui) is in use: PASS

Checking if port  (required by mesos-dns) is in use: PASS

Checking if port  (required by dcos-history) is in use: PASS

Checking if port  (required by mesos-master) is in use: PASS

Checking if port  (required by zookeeper) is in use: PASS

Checking if port  (required by marathon) is in use: PASS

Checking if port  (required by zookeeper) is in use: PASS

Checking if port  (required by exhibitor) is in use: PASS

Checking if port  (required by mesos-dns) is in use: PASS

Checking Docker is configured with a production storage driver: FAIL (devicemapper, /dev/loop0)

Docker is configured to use the devicemapper storage driver with a loopback

device behind it. This is highly recommended against by Docker and the

community at large for production use[][]. See the docker documentation on

selecting an alternate storage driver, or use alternate storage than loopback

for the devicemapper driver.

[] https://docs.docker.com/engine/userguide/storagedriver/device-mapper-driver/

[] http://www.projectatomic.io/blog/2015/06/notes-on-fedora-centos-and-docker-storage-drivers/
#上面是做一些环境检查，如果没有自行安装软件，还有端口检查，因为我是在虚拟机面装的，注意上面有一个FAIL,怎么办呢，动态改了一下shell脚本，把
那个==改成 != ,如果不知道怎么改，留言吧，

294 if [[ "${data_file}" != /dev/loop* ]]; then #在 294行哈

[root@localhost dcos]# bash dcos_install.sh master

Starting DC/OS Install Process

Running preflight checks

Checking if DC/OS is already installed: PASS (Not installed)

PASS Is SELinux disabled?

Checking if docker is installed and in PATH: PASS

Checking docker version requirement (>= 1.6): PASS (1.9.)

Checking if curl is installed and in PATH: PASS

Checking if bash is installed and in PATH: PASS

Checking if ping is installed and in PATH: PASS

Checking if tar is installed and in PATH: PASS

Checking if xz is installed and in PATH: PASS

Checking if unzip is installed and in PATH: PASS

Checking if ipset is installed and in PATH: PASS

Checking if systemd-notify is installed and in PATH: PASS

Checking if systemd is installed and in PATH: PASS

Checking systemd version requirement (>= ): PASS ()

Checking if group 'nogroup' exists: PASS

Checking if port  (required by mesos-ui) is in use: PASS

Checking if port  (required by mesos-dns) is in use: PASS

Checking if port  (required by dcos-history) is in use: PASS

Checking if port  (required by mesos-master) is in use: PASS

Checking if port  (required by zookeeper) is in use: PASS

Checking if port  (required by marathon) is in use: PASS

Checking if port  (required by zookeeper) is in use: PASS

Checking if port  (required by exhibitor) is in use: PASS

Checking if port  (required by mesos-dns) is in use: PASS

Checking Docker is configured with a production storage driver: PASS (devicemapper /dev/loop0)

Creating directories under /etc/mesosphere

Creating role file for master

Configuring DC/OS

Setting and starting DC/OS

sudo bash dcos_install.sh slave