FastDFS + Nginx代理方式访问
作者：尹正杰
版权声明：原创作品，谢绝转载！否则将追究法律责任。
一.在storage上安装nginx
1>.下载nginx软件（http://nginx.org/en/download.html）
2>.下载fastdfs-nginx-module模块并编译安装nginx
[root@node101 ~]# wget http://nginx.org/download/nginx-1.15.8.tar.gz
---- ::-- http://nginx.org/download/nginx-1.15.8.tar.gz
Resolving nginx.org (nginx.org)... 95.211.80.227, 62.210.92.35, :1af8::a004:::e3
Connecting to nginx.org (nginx.org)|95.211.80.227|:... connected.
HTTP request sent, awaiting response... OK
Length: (1004K) [application/octet-stream]
Saving to: ‘nginx-1.15..tar.gz’ %[=========================================================================================================================================================================>] ,, .0KB/s in 15s -- :: (65.0 KB/s) - ‘nginx-1.15..tar.gz’ saved [/] [root@node101 ~]#
[root@node101 ~]# wget http://nginx.org/download/nginx-1.15.8.tar.gz
[root@node101 ~]# yum -y install git
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
* base: mirror.jdcloud.com
* extras: mirror.jdcloud.com
* updates: mirror.jdcloud.com
base | 3.6 kB ::
extras | 3.4 kB ::
myglusterfs | 2.9 kB ::
mysql-connectors-community | 2.5 kB ::
mysql-tools-community | 2.5 kB ::
mysql80-community | 2.5 kB ::
updates | 3.4 kB ::
Resolving Dependencies
--> Running transaction check
---> Package git.x86_64 :1.8.3.1-.el7 will be installed
--> Processing Dependency: perl-Git = 1.8.3.1-.el7 for package: git-1.8.3.1-.el7.x86_64
--> Processing Dependency: perl(Term::ReadKey) for package: git-1.8.3.1-.el7.x86_64
--> Processing Dependency: perl(Git) for package: git-1.8.3.1-.el7.x86_64
--> Processing Dependency: perl(Error) for package: git-1.8.3.1-.el7.x86_64
--> Running transaction check
---> Package perl-Error.noarch :0.17020-.el7 will be installed
---> Package perl-Git.noarch :1.8.3.1-.el7 will be installed
---> Package perl-TermReadKey.x86_64 :2.30-.el7 will be installed
--> Finished Dependency Resolution Dependencies Resolved ===================================================================================================================================================================================================================
Package Arch Version Repository Size
===================================================================================================================================================================================================================
Installing:
git x86_64 1.8.3.1-.el7 updates 4.4 M
Installing for dependencies:
perl-Error noarch :0.17020-.el7 base k
perl-Git noarch 1.8.3.1-.el7 updates k
perl-TermReadKey x86_64 2.30-.el7 base k Transaction Summary
===================================================================================================================================================================================================================
Install Package (+ Dependent packages) Total download size: 4.5 M
Installed size: M
Downloading packages:
(/): perl-Error-0.17020-.el7.noarch.rpm | kB ::
(/): perl-TermReadKey-2.30-.el7.x86_64.rpm | kB ::
(/): perl-Git-1.8.3.1-.el7.noarch.rpm | kB ::
(/): git-1.8.3.1-.el7.x86_64.rpm | 4.4 MB ::
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Total kB/s | 4.5 MB ::
Running transaction check
Running transaction test
Transaction test succeeded
Running transaction
Installing : :perl-Error-0.17020-.el7.noarch /
Installing : perl-TermReadKey-2.30-.el7.x86_64 /
Installing : git-1.8.3.1-.el7.x86_64 /
Installing : perl-Git-1.8.3.1-.el7.noarch /
Verifying : perl-Git-1.8.3.1-.el7.noarch /
Verifying : :perl-Error-0.17020-.el7.noarch /
Verifying : git-1.8.3.1-.el7.x86_64 /
Verifying : perl-TermReadKey-2.30-.el7.x86_64 / Installed:
git.x86_64 :1.8.3.1-.el7 Dependency Installed:
perl-Error.noarch :0.17020-.el7 perl-Git.noarch :1.8.3.1-.el7 perl-TermReadKey.x86_64 :2.30-.el7 Complete!
[root@node101 ~]#
[root@node101 ~]# yum -y install git
[root@node101 ~]# yum -y install gcc automake autoconf libtool make gcc-c++ openssl
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
* base: mirror.jdcloud.com
* extras: mirror.jdcloud.com
* updates: mirror.jdcloud.com
Package gcc-4.8.-.el7.x86_64 already installed and latest version
Package :make-3.82-.el7.x86_64 already installed and latest version
Package gcc-c++-4.8.-.el7.x86_64 already installed and latest version
Resolving Dependencies
--> Running transaction check
---> Package autoconf.noarch :2.69-.el7 will be installed
--> Processing Dependency: perl(Data::Dumper) for package: autoconf-2.69-.el7.noarch
---> Package automake.noarch :1.13.-.el7 will be installed
--> Processing Dependency: perl(Thread::Queue) for package: automake-1.13.-.el7.noarch
--> Processing Dependency: perl(TAP::Parser) for package: automake-1.13.-.el7.noarch
---> Package libtool.x86_64 :2.4.-.el7_3 will be installed
--> Running transaction check
---> Package perl-Data-Dumper.x86_64 :2.145-.el7 will be installed
---> Package perl-Test-Harness.noarch :3.28-.el7 will be installed
---> Package perl-Thread-Queue.noarch :3.02-.el7 will be installed
--> Finished Dependency Resolution Dependencies Resolved ===================================================================================================================================================================================================================
Package Arch Version Repository Size
===================================================================================================================================================================================================================
Installing:
autoconf noarch 2.69-.el7 base k
automake noarch 1.13.-.el7 base k
libtool x86_64 2.4.-.el7_3 base k
Installing for dependencies:
perl-Data-Dumper x86_64 2.145-.el7 base k
perl-Test-Harness noarch 3.28-.el7 base k
perl-Thread-Queue noarch 3.02-.el7 base k Transaction Summary
===================================================================================================================================================================================================================
Install Packages (+ Dependent packages) Total download size: 2.3 M
Installed size: 6.8 M
Downloading packages:
(/): autoconf-2.69-.el7.noarch.rpm | kB ::
(/): perl-Thread-Queue-3.02-.el7.noarch.rpm | kB ::
(/): perl-Data-Dumper-2.145-.el7.x86_64.rpm | kB ::
(/): libtool-2.4.-.el7_3.x86_64.rpm | kB ::
(/): perl-Test-Harness-3.28-.el7.noarch.rpm | kB ::
(/): automake-1.13.-.el7.noarch.rpm | kB ::
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Total kB/s | 2.3 MB ::
Running transaction check
Running transaction test
Transaction test succeeded
Running transaction
Installing : perl-Thread-Queue-3.02-.el7.noarch /
Installing : perl-Test-Harness-3.28-.el7.noarch /
Installing : perl-Data-Dumper-2.145-.el7.x86_64 /
Installing : autoconf-2.69-.el7.noarch /
Installing : automake-1.13.-.el7.noarch /
Installing : libtool-2.4.-.el7_3.x86_64 /
Verifying : autoconf-2.69-.el7.noarch /
Verifying : perl-Data-Dumper-2.145-.el7.x86_64 /
Verifying : perl-Test-Harness-3.28-.el7.noarch /
Verifying : perl-Thread-Queue-3.02-.el7.noarch /
Verifying : automake-1.13.-.el7.noarch /
Verifying : libtool-2.4.-.el7_3.x86_64 / Installed:
autoconf.noarch :2.69-.el7 automake.noarch :1.13.-.el7 libtool.x86_64 :2.4.-.el7_3 Dependency Installed:
perl-Data-Dumper.x86_64 :2.145-.el7 perl-Test-Harness.noarch :3.28-.el7 perl-Thread-Queue.noarch :3.02-.el7 Complete!
[root@node101 ~]#
[root@node101 ~]# yum -y install gcc automake autoconf libtool make gcc-c++ openssl
[root@node101 ~]# tar -zxf nginx-1.15..tar.gz -C /yinzhengjie/softwares/
[root@node101 ~]#
[root@node101 ~]# cd /yinzhengjie/softwares/nginx-1.15./
[root@node101 nginx-1.15.]#
[root@node101 nginx-1.15.]# ll
total
drwxr-xr-x Feb : auto
-rw-r--r-- Dec : CHANGES
-rw-r--r-- Dec : CHANGES.ru
drwxr-xr-x Feb : conf
-rwxr-xr-x Dec : configure
drwxr-xr-x Feb : contrib
drwxr-xr-x Feb : html
-rw-r--r-- Dec : LICENSE
drwxr-xr-x Feb : man
-rw-r--r-- Dec : README
drwxr-xr-x Feb : src
[root@node101 nginx-1.15.]#
[root@node101 nginx-1.15.]# git clone https://github.com/happyfish100/fastdfs-nginx-module
Cloning into 'fastdfs-nginx-module'...
remote: Enumerating objects: , done.
remote: Total (delta ), reused (delta ), pack-reused
Unpacking objects: % (/), done.
[root@node101 nginx-1.15.]#
[root@node101 nginx-1.15.]# ll
total
drwxr-xr-x Feb : auto
-rw-r--r-- Dec : CHANGES
-rw-r--r-- Dec : CHANGES.ru
drwxr-xr-x Feb : conf
-rwxr-xr-x Dec : configure
drwxr-xr-x Feb : contrib
drwxr-xr-x root root Feb : fastdfs-nginx-module #这个就是咱们刚刚clone的模块
drwxr-xr-x Feb : html
-rw-r--r-- Dec : LICENSE
drwxr-xr-x Feb : man
-rw-r--r-- Dec : README
drwxr-xr-x Feb : src
[root@node101 nginx-1.15.]#
[root@node101 nginx-1.15.]#
[root@node101 nginx-1.15.]# useradd -s /sbin/nologin -M www #创建用户用于一会编译时使用，你也可以自定义其他的用户名称
[root@node101 nginx-1.15.]#
[root@node101 nginx-1.15.]# cp fastdfs-nginx-module/src/config fastdfs-nginx-module/ #编译的时候必须有配置文件存在，否则会报错！
[root@node101 nginx-1.15.]#
[root@node101 ~]# whereis openssl
openssl: /usr/bin/openssl /usr/lib64/openssl /usr/share/man/man1/openssl.1ssl.gz
[root@node101 ~]#
[root@node101 ~]# ls /usr/lib64/openssl
engines
[root@node101 ~]#
[root@node101 nginx-1.15.]# ./configure --prefix=/yinzhengjie/softwares/nginx-1.15. --user=www --group=www --with-http_ssl_module --with-http_stub_status_module --add-module=./fastdfs-nginx-module --with-openssl=/usr/lib64/openssl
checking for OS
+ Linux 3.10.-.el7.x86_64 x86_64
checking for C compiler ... found
+ using GNU C compiler
+ gcc version: 4.8. (Red Hat 4.8.-) (GCC)
checking for gcc -pipe switch ... found
checking for -Wl,-E switch ... found
checking for gcc builtin atomic operations ... found
checking for C99 variadic macros ... found
checking for gcc variadic macros ... found
checking for gcc builtin bit byteswap ... found
checking for unistd.h ... found
checking for inttypes.h ... found
checking for limits.h ... found
checking for sys/filio.h ... not found
checking for sys/param.h ... found
checking for sys/mount.h ... found
checking for sys/statvfs.h ... found
checking for crypt.h ... found
checking for Linux specific features
checking for epoll ... found
checking for EPOLLRDHUP ... found
checking for EPOLLEXCLUSIVE ... not found
checking for O_PATH ... found
checking for sendfile() ... found
checking for sendfile64() ... found
checking for sys/prctl.h ... found
checking for prctl(PR_SET_DUMPABLE) ... found
checking for prctl(PR_SET_KEEPCAPS) ... found
checking for capabilities ... found
checking for crypt_r() ... found
checking for sys/vfs.h ... found
checking for poll() ... found
checking for /dev/poll ... not found
checking for kqueue ... not found
checking for crypt() ... not found
checking for crypt() in libcrypt ... found
checking for F_READAHEAD ... not found
checking for posix_fadvise() ... found
checking for O_DIRECT ... found
checking for F_NOCACHE ... not found
checking for directio() ... not found
checking for statfs() ... found
checking for statvfs() ... found
checking for dlopen() ... not found
checking for dlopen() in libdl ... found
checking for sched_yield() ... found
checking for sched_setaffinity() ... found
checking for SO_SETFIB ... not found
checking for SO_REUSEPORT ... found
checking for SO_ACCEPTFILTER ... not found
checking for SO_BINDANY ... not found
checking for IP_TRANSPARENT ... found
checking for IP_BINDANY ... not found
checking for IP_BIND_ADDRESS_NO_PORT ... not found
checking for IP_RECVDSTADDR ... not found
checking for IP_SENDSRCADDR ... not found
checking for IP_PKTINFO ... found
checking for IPV6_RECVPKTINFO ... found
checking for TCP_DEFER_ACCEPT ... found
checking for TCP_KEEPIDLE ... found
checking for TCP_FASTOPEN ... found
checking for TCP_INFO ... found
checking for accept4() ... found
checking for eventfd() ... found
checking for int size ... bytes
checking for long size ... bytes
checking for long long size ... bytes
checking for void * size ... bytes
checking for uint32_t ... found
checking for uint64_t ... found
checking for sig_atomic_t ... found
checking for sig_atomic_t size ... bytes
checking for socklen_t ... found
checking for in_addr_t ... found
checking for in_port_t ... found
checking for rlim_t ... found
checking for uintptr_t ... uintptr_t found
checking for system byte ordering ... little endian
checking for size_t size ... bytes
checking for off_t size ... bytes
checking for time_t size ... bytes
checking for AF_INET6 ... found
checking for setproctitle() ... not found
checking for pread() ... found
checking for pwrite() ... found
checking for pwritev() ... found
checking for sys_nerr ... found
checking for localtime_r() ... found
checking for clock_gettime(CLOCK_MONOTONIC) ... found
checking for posix_memalign() ... found
checking for memalign() ... found
checking for mmap(MAP_ANON|MAP_SHARED) ... found
checking for mmap("/dev/zero", MAP_SHARED) ... found
checking for System V shared memory ... found
checking for POSIX semaphores ... not found
checking for POSIX semaphores in libpthread ... found
checking for struct msghdr.msg_control ... found
checking for ioctl(FIONBIO) ... found
checking for struct tm.tm_gmtoff ... found
checking for struct dirent.d_namlen ... not found
checking for struct dirent.d_type ... found
checking for sysconf(_SC_NPROCESSORS_ONLN) ... found
checking for sysconf(_SC_LEVEL1_DCACHE_LINESIZE) ... found
checking for openat(), fstatat() ... found
checking for getaddrinfo() ... found
configuring additional modules
adding module in ./fastdfs-nginx-module
+ ngx_http_fastdfs_module was configured
checking for PCRE library ... found
checking for PCRE JIT support ... found
checking for zlib library ... found
creating objs/Makefile Configuration summary
+ using system PCRE library
+ using OpenSSL library: /usr/lib64/openssl
+ using system zlib library nginx path prefix: "/yinzhengjie/softwares/nginx-1.15.8"
nginx binary file: "/yinzhengjie/softwares/nginx-1.15.8/sbin/nginx"
nginx modules path: "/yinzhengjie/softwares/nginx-1.15.8/modules"
nginx configuration prefix: "/yinzhengjie/softwares/nginx-1.15.8/conf"
nginx configuration file: "/yinzhengjie/softwares/nginx-1.15.8/conf/nginx.conf"
nginx pid file: "/yinzhengjie/softwares/nginx-1.15.8/logs/nginx.pid"
nginx error log file: "/yinzhengjie/softwares/nginx-1.15.8/logs/error.log"
nginx http access log file: "/yinzhengjie/softwares/nginx-1.15.8/logs/access.log"
nginx http client request body temporary files: "client_body_temp"
nginx http proxy temporary files: "proxy_temp"
nginx http fastcgi temporary files: "fastcgi_temp"
nginx http uwsgi temporary files: "uwsgi_temp"
nginx http scgi temporary files: "scgi_temp" [root@node101 nginx-1.15.]# echo $? [root@node101 nginx-1.15.]#
[root@node101 nginx-1.15.8]# ./configure --prefix=/yinzhengjie/softwares/nginx-1.15.8 --user=www --group=www --with-http_ssl_module --with-http_stub_status_module --add-module=./fastdfs-nginx-module --with-openssl=/usr/lib64/openssl
编译安装nginx后，可参考连接：https://github.com/happyfish100/fastdfs-nginx-module/blob/master/INSTALL