R1
<Huawei>system-view
Enter system view, return user view with Ctrl+Z.
[Huawei]sy
[Huawei]sysname r1
[r1]int
[r1]interface g0/0/0
[r1-GigabitEthernet0/0/0]ip ad
[r1-GigabitEthernet0/0/0]ip address 172.16.64.1 20
Jan 21 2022 17:00:53-08:00 r1 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP
on the interface GigabitEthernet0/0/0 has entered the UP state.
[r1-GigabitEthernet0/0/0]int
[r1-GigabitEthernet0/0/0]qu
[r1-GigabitEthernet0/0/0]quit
[r1]int
[r1]interface l
[r1]interface LoopBack 0
[r1-LoopBack0]ip ad
[r1-LoopBack0]ip address 172.16.80.1 20
[r1-LoopBack0]qu
[r1-LoopBack0]quit
[r1]
Please check whether system data has been changed, and save data in time
Configuration console time out, please press any key to log on
<r1>sy
<r1>system-view
Enter system view, return user view with Ctrl+Z.
[r1]os
[r1]ospf 100 r
[r1]ospf 100 router-id 1.1.1.1
[r1-ospf-100]ar
[r1-ospf-100]area1
^
Error: Unrecognized command found at '^' position.
[r1-ospf-100]ne
[r1-ospf-100]nexthop
[r1-ospf-100]ar
[r1-ospf-100]area 1
[r1-ospf-100-area-0.0.0.1]ne
[r1-ospf-100-area-0.0.0.1]network 0.0.0.0 255.255.255.255
[r1-ospf-100-area-0.0.0.1]qu
[r1-ospf-100-area-0.0.0.1]quit
[r1-ospf-100]
Jan 21 2022 17:19:08-08:00 r1 %%01OSPF/4/NBR_CHANGE_E(l)[0]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=25600, NeighborAddress=2.64.16.172, Neig
hborEvent=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init)
[r1-ospf-100]
Jan 21 2022 17:19:08-08:00 r1 %%01OSPF/4/NBR_CHANGE_E(l)[1]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=25600, NeighborAddress=2.64.16.172, Neig
hborEvent=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=ExStart
)
[r1-ospf-100]
Jan 21 2022 17:19:08-08:00 r1 %%01OSPF/4/NBR_CHANGE_E(l)[2]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=25600, NeighborAddress=2.64.16.172, Neig
hborEvent=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState=E
xchange)
[r1-ospf-100]
Jan 21 2022 17:19:08-08:00 r1 %%01OSPF/4/NBR_CHANGE_E(l)[3]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=25600, NeighborAddress=2.64.16.172, Neig
hborEvent=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=Loa
ding)
[r1-ospf-100]
Jan 21 2022 17:19:08-08:00 r1 %%01OSPF/4/NBR_CHANGE_E(l)[4]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=25600, NeighborAddress=2.64.16.172, Neig
hborEvent=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Full)
[r1-ospf-100]
Please check whether system data has been changed, and save data in time
Configuration console time out, please press any key to log on
<r1>usy
<r1>sy
<r1>system-view
Enter system view, return user view with Ctrl+Z.
[r1]int
[r1]interface g0/0/0
[r1-GigabitEthernet0/0/0]os
[r1-GigabitEthernet0/0/0]ospf a
[r1-GigabitEthernet0/0/0]ospf authentication-mode s
[r1-GigabitEthernet0/0/0]ospf authentication-mode simple c
[r1-GigabitEthernet0/0/0]ospf authentication-mode simple cipher 123
[r1-GigabitEthernet0/0/0]
Jan 21 2022 17:37:47-08:00 r1 %%01RM/4/IPV4_DEFT_RT_CHG(l)[0]:IPV4 default Route
is changed. (ChangeType=Delete, InstanceId=0, Protocol=OSPF, ExitIf=GigabitEthe
rnet0/0/0, Nexthop=172.16.64.2, Neighbour=0.0.0.0, Preference=2516582400, Label=
NULL, Metric=16777216)
[r1-GigabitEthernet0/0/0]qu
[r1-GigabitEthernet0/0/0]quit
[r1]os
[r1]ospf 100
[r1-ospf-100]ar
[r1-ospf-100]are
[r1-ospf-100]area 1
[r1-ospf-100-area-0.0.0.1]a
[r1-ospf-100-area-0.0.0.1]abr-summary
[r1-ospf-100-area-0.0.0.1]arp-ping
[r1-ospf-100-area-0.0.0.1]authentication-mode s
[r1-ospf-100-area-0.0.0.1]authentication-mode simple c
[r1-ospf-100-area-0.0.0.1]authentication-mode simple cipher 123
[r1-ospf-100-area-0.0.0.1]qu
[r1-ospf-100-area-0.0.0.1]quit
[r1-ospf-100]qu
[r1-ospf-100]quit
[r1]int
[r1]interface g0/0/0
[r1-GigabitEthernet0/0/0]os
[r1-GigabitEthernet0/0/0]ospf h
[r1-GigabitEthernet0/0/0]ospf t
[r1-GigabitEthernet0/0/0]ospf trans-delay
[r1-GigabitEthernet0/0/0]ospf timer h
[r1-GigabitEthernet0/0/0]ospf timer hello 5
[r1-GigabitEthernet0/0/0]
Jan 21 2022 17:42:28-08:00 r1 %%01OSPF/3/NBR_CHG_DOWN(l)[1]:Neighbor event:neigh
bor state changed to Down. (ProcessId=25600, NeighborAddress=2.2.2.2, NeighborEv
ent=InactivityTimer, NeighborPreviousState=Full, NeighborCurrentState=Down)
[r1-GigabitEthernet0/0/0]
Jan 21 2022 17:42:28-08:00 r1 %%01OSPF/3/NBR_DOWN_REASON(l)[2]:Neighbor state le
aves full or changed to Down. (ProcessId=25600, NeighborRouterId=2.2.2.2, Neighb
orAreaId=16777216, NeighborInterface=GigabitEthernet0/0/0,NeighborDownImmediate
reason=Neighbor Down Due to Inactivity, NeighborDownPrimeReason=Interface Parame
ter Mismatch, NeighborChangeTime=2022-01-21 17:42:28-08:00)
[r1-GigabitEthernet0/0/0]
Jan 21 2022 17:42:28-08:00 r1 %%01RM/4/IPV4_DEFT_RT_CHG(l)[3]:IPV4 default Route
is changed. (ChangeType=Delete, InstanceId=0, Protocol=OSPF, ExitIf=GigabitEthe
rnet0/0/0, Nexthop=172.16.64.2, Neighbour=0.0.0.0, Preference=2516582400, Label=
NULL, Metric=16777216)
[r1-GigabitEthernet0/0/0]
Jan 21 2022 17:42:38-08:00 r1 %%01OSPF/4/NBR_CHANGE_E(l)[4]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=25600, NeighborAddress=2.64.16.172, Neig
hborEvent=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init)
[r1-GigabitEthernet0/0/0]
Jan 21 2022 17:42:38-08:00 r1 %%01OSPF/4/NBR_CHANGE_E(l)[5]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=25600, NeighborAddress=2.64.16.172, Neig
hborEvent=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=ExStart
)
[r1-GigabitEthernet0/0/0]
Jan 21 2022 17:42:38-08:00 r1 %%01OSPF/4/NBR_CHANGE_E(l)[6]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=25600, NeighborAddress=2.64.16.172, Neig
hborEvent=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState=E
xchange)
[r1-GigabitEthernet0/0/0]
Jan 21 2022 17:42:38-08:00 r1 %%01OSPF/4/NBR_CHANGE_E(l)[7]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=25600, NeighborAddress=2.64.16.172, Neig
hborEvent=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=Loa
ding)
[r1-GigabitEthernet0/0/0]
Jan 21 2022 17:42:38-08:00 r1 %%01OSPF/4/NBR_CHANGE_E(l)[8]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=25600, NeighborAddress=2.64.16.172, Neig
hborEvent=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Full)
R2
<Huawei>system-view
Enter system view, return user view with Ctrl+Z.
[Huawei]sy
[Huawei]sysname r2
[r2]int
[r2]interface g0/0/0
[r2-GigabitEthernet0/0/0]ip ad
[r2-GigabitEthernet0/0/0]ip address 172.16.64.2 20
Jan 21 2022 17:03:06-08:00 r2 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP
on the interface GigabitEthernet0/0/0 has entered the UP state.
[r2-GigabitEthernet0/0/0]qu
[r2-GigabitEthernet0/0/0]quit
[r2]int
[r2]interface l
[r2]interface LoopBack 0
[r2-LoopBack0]172.16.112.1 20
^
Error: Unrecognized command found at '^' position.
[r2-LoopBack0]ip ad
[r2-LoopBack0]ip address 172.16.112.1 20
[r2-LoopBack0]qu
[r2-LoopBack0]quit
[r2]int
[r2]interface g0/0/1
[r2-GigabitEthernet0/0/1]ip ad
[r2-GigabitEthernet0/0/1]ip address 172.16.96.1 20
Jan 21 2022 17:04:51-08:00 r2 %%01IFNET/4/LINK_STATE(l)[1]:The line protocol IP
on the interface GigabitEthernet0/0/1 has entered the UP state.
[r2-GigabitEthernet0/0/1]qu
[r2-GigabitEthernet0/0/1]quit
[r2]
Please check whether system data has been changed, and save data in time
Configuration console time out, please press any key to log on
<r2>sy
<r2>system-view
Enter system view, return user view with Ctrl+Z.
[r2]os
[r2]ospf 100 r
[r2]ospf 100 router-id 2.2.2.2
[r2-ospf-100]ar
[r2-ospf-100]area 1
[r2-ospf-100-area-0.0.0.1]ne
[r2-ospf-100-area-0.0.0.1]network 0.0.0.0 255.255.255.255
[r2-ospf-100-area-0.0.0.1]
Jan 21 2022 17:19:08-08:00 r2 %%01OSPF/4/NBR_CHANGE_E(l)[0]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=25600, NeighborAddress=1.64.16.172, Neig
hborEvent=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init)
[r2-ospf-100-area-0.0.0.1]
Jan 21 2022 17:19:08-08:00 r2 %%01OSPF/4/NBR_CHANGE_E(l)[1]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=25600, NeighborAddress=1.64.16.172, Neig
hborEvent=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=2Way)
[r2-ospf-100-area-0.0.0.1]
Jan 21 2022 17:19:08-08:00 r2 %%01OSPF/4/NBR_CHANGE_E(l)[2]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=25600, NeighborAddress=1.64.16.172, Neig
hborEvent=AdjOk?, NeighborPreviousState=2Way, NeighborCurrentState=ExStart)
[r2-ospf-100-area-0.0.0.1]
Jan 21 2022 17:19:08-08:00 r2 %%01OSPF/4/NBR_CHANGE_E(l)[3]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=25600, NeighborAddress=1.64.16.172, Neig
hborEvent=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState=E
xchange)
[r2-ospf-100-area-0.0.0.1]
Jan 21 2022 17:19:09-08:00 r2 %%01OSPF/4/NBR_CHANGE_E(l)[4]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=25600, NeighborAddress=1.64.16.172, Neig
hborEvent=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=Loa
ding)
[r2-ospf-100-area-0.0.0.1]
Jan 21 2022 17:19:09-08:00 r2 %%01OSPF/4/NBR_CHANGE_E(l)[5]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=25600, NeighborAddress=1.64.16.172, Neig
hborEvent=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Full)
[r2-ospf-100-area-0.0.0.1]qu
[r2-ospf-100-area-0.0.0.1]quit
[r2-ospf-100]
Jan 21 2022 17:19:59-08:00 r2 %%01OSPF/4/NBR_CHANGE_E(l)[6]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=25600, NeighborAddress=2.96.16.172, Neig
hborEvent=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init)
[r2-ospf-100]
Jan 21 2022 17:20:07-08:00 r2 %%01OSPF/4/NBR_CHANGE_E(l)[7]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=25600, NeighborAddress=2.96.16.172, Neig
hborEvent=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=ExStart
)
[r2-ospf-100]
Jan 21 2022 17:20:07-08:00 r2 %%01OSPF/4/NBR_CHANGE_E(l)[8]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=25600, NeighborAddress=2.96.16.172, Neig
hborEvent=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState=E
xchange)
[r2-ospf-100]
Jan 21 2022 17:20:07-08:00 r2 %%01OSPF/4/NBR_CHANGE_E(l)[9]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=25600, NeighborAddress=2.96.16.172, Neig
hborEvent=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=Loa
ding)
[r2-ospf-100]
Jan 21 2022 17:20:07-08:00 r2 %%01OSPF/4/NBR_CHANGE_E(l)[10]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=25600, NeighborAddress=2.96.16.172, Nei
ghborEvent=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Full
)
[r2-ospf-100]
Please check whether system data has been changed, and save data in time
Configuration console time out, please press any key to log on
<r2>y
<r2>sy
<r2>system-view
Enter system view, return user view with Ctrl+Z.
[r2]int
[r2]interface g0/0/0
[r2-GigabitEthernet0/0/0]os
[r2-GigabitEthernet0/0/0]ospf a
[r2-GigabitEthernet0/0/0]ospf authentication-mode si
[r2-GigabitEthernet0/0/0]ospf authentication-mode simple ci
[r2-GigabitEthernet0/0/0]ospf authentication-mode simple cipher 123
[r2-GigabitEthernet0/0/0]qu
[r2-GigabitEthernet0/0/0]quit
[r2]int
[r2]interface g0/0/1
[r2-GigabitEthernet0/0/1]os
[r2-GigabitEthernet0/0/1]ospf a
[r2-GigabitEthernet0/0/1]ospf authentication-mode s
[r2-GigabitEthernet0/0/1]ospf authentication-mode simple c
[r2-GigabitEthernet0/0/1]ospf authentication-mode simple cipher 123
[r2-GigabitEthernet0/0/1]os
[r2-GigabitEthernet0/0/1]ospf a
[r2-GigabitEthernet0/0/1]ospf authentication-mode m
[r2-GigabitEthernet0/0/1]ospf authentication-mode md5
[r2-GigabitEthernet0/0/1]
Jan 21 2022 17:37:47-08:00 r2 %%01OSPF/3/NBR_CHG_DOWN(l)[0]:Neighbor event:neigh
bor state changed to Down. (ProcessId=25600, NeighborAddress=3.3.3.3, NeighborEv
ent=InactivityTimer, NeighborPreviousState=Full, NeighborCurrentState=Down)
[r2-GigabitEthernet0/0/1]
Jan 21 2022 17:37:47-08:00 r2 %%01OSPF/3/NBR_DOWN_REASON(l)[1]:Neighbor state le
aves full or changed to Down. (ProcessId=25600, NeighborRouterId=3.3.3.3, Neighb
orAreaId=16777216, NeighborInterface=GigabitEthernet0/0/1,NeighborDownImmediate
reason=Neighbor Down Due to Inactivity, NeighborDownPrimeReason=Hello Not Seen,
NeighborChangeTime=2022-01-21 17:37:47-08:00)
[r2-GigabitEthernet0/0/1]
Jan 21 2022 17:37:47-08:00 r2 %%01RM/4/IPV4_DEFT_RT_CHG(l)[2]:IPV4 default Route
is changed. (ChangeType=Delete, InstanceId=0, Protocol=OSPF, ExitIf=GigabitEthe
rnet0/0/1, Nexthop=172.16.96.2, Neighbour=0.0.0.0, Preference=2516582400, Label=
NULL, Metric=16777216)
[r2-GigabitEthernet0/0/1]
Jan 21 2022 17:38:00-08:00 r2 %%01OSPF/4/NBR_CHANGE_E(l)[3]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=25600, NeighborAddress=2.96.16.172, Neig
hborEvent=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init)
[r2-GigabitEthernet0/0/1]
Jan 21 2022 17:38:00-08:00 r2 %%01OSPF/4/NBR_CHANGE_E(l)[4]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=25600, NeighborAddress=2.96.16.172, Neig
hborEvent=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=ExStart
)
[r2-GigabitEthernet0/0/1]
Jan 21 2022 17:38:00-08:00 r2 %%01OSPF/4/NBR_CHANGE_E(l)[5]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=25600, NeighborAddress=2.96.16.172, Neig
hborEvent=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState=E
xchange)
[r2-GigabitEthernet0/0/1]
Jan 21 2022 17:38:00-08:00 r2 %%01OSPF/4/NBR_CHANGE_E(l)[6]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=25600, NeighborAddress=2.96.16.172, Neig
hborEvent=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=Loa
ding)
[r2-GigabitEthernet0/0/1]
Jan 21 2022 17:38:00-08:00 r2 %%01OSPF/4/NBR_CHANGE_E(l)[7]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=25600, NeighborAddress=2.96.16.172, Neig
hborEvent=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Full)
[r2-GigabitEthernet0/0/1]qu
[r2]os
[r2]ospf 100
[r2-ospf-100]are
[r2-ospf-100]area 1
[r2-ospf-100-area-0.0.0.1]a
[r2-ospf-100-area-0.0.0.1]abr-summarya\
[r2-ospf-100-area-0.0.0.1]abr-summar
[r2-ospf-100-area-0.0.0.1]abr-summary
[r2-ospf-100-area-0.0.0.1]au
[r2-ospf-100-area-0.0.0.1]authentication-mode s
[r2-ospf-100-area-0.0.0.1]authentication-mode simple c
[r2-ospf-100-area-0.0.0.1]authentication-mode simple cipher 123
[r2-ospf-100-area-0.0.0.1]qu
[r2-ospf-100-area-0.0.0.1]quit
[r2-ospf-100]qu
[r2-ospf-100]quit
[r2]int
[r2]interface g0/0/0
[r2-GigabitEthernet0/0/0]os
[r2-GigabitEthernet0/0/0]ospf t
[r2-GigabitEthernet0/0/0]ospf trans-delay
[r2-GigabitEthernet0/0/0]ospf timer h
[r2-GigabitEthernet0/0/0]ospf timer hello 5
[r2-GigabitEthernet0/0/0]
Jan 21 2022 17:42:33-08:00 r2 %%01OSPF/3/NBR_DOWN_REASON(l)[8]:Neighbor state le
aves full or changed to Down. (ProcessId=25600, NeighborRouterId=1.1.1.1, Neighb
orAreaId=16777216, NeighborInterface=GigabitEthernet0/0/0,NeighborDownImmediate
reason=Neighbor Down Due to 1-Wayhello Received, NeighborDownPrimeReason=1-Wayhe
llo Received, NeighborChangeTime=2022-01-21 17:42:33-08:00)
[r2-GigabitEthernet0/0/0]
Jan 21 2022 17:42:33-08:00 r2 %%01OSPF/4/NBR_CHANGE_E(l)[9]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=25600, NeighborAddress=1.64.16.172, Neig
hborEvent=1-Way, NeighborPreviousState=Full, NeighborCurrentState=Init)
[r2-GigabitEthernet0/0/0]
Jan 21 2022 17:42:39-08:00 r2 %%01OSPF/4/NBR_CHANGE_E(l)[10]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=25600, NeighborAddress=1.64.16.172, Nei
ghborEvent=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=ExStar
t)
[r2-GigabitEthernet0/0/0]
Jan 21 2022 17:42:39-08:00 r2 %%01OSPF/4/NBR_CHANGE_E(l)[11]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=25600, NeighborAddress=1.64.16.172, Nei
ghborEvent=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState=
Exchange)
[r2-GigabitEthernet0/0/0]
Jan 21 2022 17:42:39-08:00 r2 %%01OSPF/4/NBR_CHANGE_E(l)[12]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=25600, NeighborAddress=1.64.16.172, Nei
ghborEvent=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=Lo
ading)
[r2-GigabitEthernet0/0/0]
Jan 21 2022 17:42:39-08:00 r2 %%01OSPF/4/NBR_CHANGE_E(l)[13]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=25600, NeighborAddress=1.64.16.172, Nei
ghborEvent=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Full
)
R3
<Huawei>system-view
Enter system view, return user view with Ctrl+Z.
[Huawei]sy
[Huawei]sysname r3
[r3]int
[r3]interface g0/0/0
[r3-GigabitEthernet0/0/0]ip ad
[r3-GigabitEthernet0/0/0]ip address 172.16.96.2 20
Jan 21 2022 17:05:34-08:00 r3 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP
on the interface GigabitEthernet0/0/0 has entered the UP state.
[r3-GigabitEthernet0/0/0]qu
[r3-GigabitEthernet0/0/0]quit
[r3]int
[r3]interface g0/0/1
[r3-GigabitEthernet0/0/1]ip ad
[r3-GigabitEthernet0/0/1]ip address 172.16.0.3 19
[r3-GigabitEthernet0/0/1]
Jan 21 2022 17:06:44-08:00 r3 %%01IFNET/4/LINK_STATE(l)[1]:The line protocol IP
on the interface GigabitEthernet0/0/1 has entered the UP state.
[r3-GigabitEthernet0/0/1]qu
[r3-GigabitEthernet0/0/1]quit
[r3]int
[r3]interface l
[r3]interface LoopBack 0
[r3-LoopBack0]ip ad
[r3-LoopBack0]ip address 172.16.32.1 19
[r3-LoopBack0]
Please check whether system data has been changed, and save data in time
Configuration console time out, please press any key to log on
<r3>y
<r3>sy
<r3>system-view
Enter system view, return user view with Ctrl+Z.
[r3]os
[r3]ospf 100 r
[r3]ospf 100 router-id 3.3.3.3
[r3-ospf-100]ar
[r3-ospf-100]area 1
[r3-ospf-100-area-0.0.0.1]ne
[r3-ospf-100-area-0.0.0.1]network 172.16.96.2 0.0.0.0
[r3-ospf-100-area-0.0.0.1]qu
[r3-ospf-100-area-0.0.0.1]quit
[r3-ospf-100]
Jan 21 2022 17:20:06-08:00 r3 %%01OSPF/4/NBR_CHANGE_E(l)[0]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=25600, NeighborAddress=1.96.16.172, Neig
hborEvent=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init)
[r3-ospf-100]
Jan 21 2022 17:20:06-08:00 r3 %%01OSPF/4/NBR_CHANGE_E(l)[1]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=25600, NeighborAddress=1.96.16.172, Neig
hborEvent=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=2Way)
[r3-ospf-100]
Jan 21 2022 17:20:06-08:00 r3 %%01OSPF/4/NBR_CHANGE_E(l)[2]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=25600, NeighborAddress=1.96.16.172, Neig
hborEvent=AdjOk?, NeighborPreviousState=2Way, NeighborCurrentState=ExStart)
[r3-ospf-100]
Jan 21 2022 17:20:06-08:00 r3 %%01OSPF/4/NBR_CHANGE_E(l)[3]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=25600, NeighborAddress=1.96.16.172, Neig
hborEvent=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState=E
xchange)
[r3-ospf-100]
Jan 21 2022 17:20:06-08:00 r3 %%01OSPF/4/NBR_CHANGE_E(l)[4]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=25600, NeighborAddress=1.96.16.172, Neig
hborEvent=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=Loa
ding)
[r3-ospf-100]
Jan 21 2022 17:20:06-08:00 r3 %%01OSPF/4/NBR_CHANGE_E(l)[5]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=25600, NeighborAddress=1.96.16.172, Neig
hborEvent=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Full)
[r3-ospf-100]ar
[r3-ospf-100]area 0
[r3-ospf-100-area-0.0.0.0]ne
[r3-ospf-100-area-0.0.0.0]network 172.16.0.3 0.0.0.0
[r3-ospf-100-area-0.0.0.0]ne
[r3-ospf-100-area-0.0.0.0]network 172.16.32.1 0.0.0.0
[r3-ospf-100-area-0.0.0.0]
Jan 21 2022 17:21:43-08:00 r3 %%01OSPF/4/NBR_CHANGE_E(l)[6]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=25600, NeighborAddress=4.0.16.172, Neigh
borEvent=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init)
[r3-ospf-100-area-0.0.0.0]
Jan 21 2022 17:21:49-08:00 r3 %%01OSPF/4/NBR_CHANGE_E(l)[7]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=25600, NeighborAddress=4.0.16.172, Neigh
borEvent=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=ExStart)
[r3-ospf-100-area-0.0.0.0]
Jan 21 2022 17:21:49-08:00 r3 %%01OSPF/4/NBR_CHANGE_E(l)[8]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=25600, NeighborAddress=4.0.16.172, Neigh
borEvent=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState=Ex
change)
[r3-ospf-100-area-0.0.0.0]
Jan 21 2022 17:21:49-08:00 r3 %%01OSPF/4/NBR_CHANGE_E(l)[9]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=25600, NeighborAddress=4.0.16.172, Neigh
borEvent=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=Load
ing)
[r3-ospf-100-area-0.0.0.0]
Jan 21 2022 17:21:49-08:00 r3 %%01OSPF/4/NBR_CHANGE_E(l)[10]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=25600, NeighborAddress=4.0.16.172, Neig
hborEvent=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Full)
[r3-ospf-100-area-0.0.0.0]
Jan 21 2022 17:23:11-08:00 r3 %%01OSPF/4/NBR_CHANGE_E(l)[11]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=25600, NeighborAddress=5.0.16.172, Neig
hborEvent=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init)
[r3-ospf-100-area-0.0.0.0]
Jan 21 2022 17:23:15-08:00 r3 %%01OSPF/4/NBR_CHANGE_E(l)[12]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=25600, NeighborAddress=5.0.16.172, Neig
hborEvent=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=ExStart
)
[r3-ospf-100-area-0.0.0.0]
Jan 21 2022 17:23:15-08:00 r3 %%01OSPF/4/NBR_CHANGE_E(l)[13]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=25600, NeighborAddress=5.0.16.172, Neig
hborEvent=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState=E
xchange)
[r3-ospf-100-area-0.0.0.0]
Jan 21 2022 17:23:15-08:00 r3 %%01OSPF/4/NBR_CHANGE_E(l)[14]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=25600, NeighborAddress=5.0.16.172, Neig
hborEvent=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=Loa
ding)
[r3-ospf-100-area-0.0.0.0]
Jan 21 2022 17:23:15-08:00 r3 %%01OSPF/4/NBR_CHANGE_E(l)[15]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=25600, NeighborAddress=5.0.16.172, Neig
hborEvent=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Full)
[r3-ospf-100-area-0.0.0.0]
Please check whether system data has been changed, and save data in time
Configuration console time out, please press any key to log on
<r3>sy
<r3>system-view
Enter system view, return user view with Ctrl+Z.
[r3]\int
[r3]int
[r3]interface g0/0/0
[r3-GigabitEthernet0/0/0]os
[r3-GigabitEthernet0/0/0]ospf a
[r3-GigabitEthernet0/0/0]ospf authentication-mode s
[r3-GigabitEthernet0/0/0]ospf authentication-mode simple c
[r3-GigabitEthernet0/0/0]ospf authentication-mode simple cipher 123
[r3-GigabitEthernet0/0/0]
Jan 21 2022 17:37:45-08:00 r3 %%01OSPF/3/NBR_CHG_DOWN(l)[0]:Neighbor event:neigh
bor state changed to Down. (ProcessId=25600, NeighborAddress=2.2.2.2, NeighborEv
ent=InactivityTimer, NeighborPreviousState=Full, NeighborCurrentState=Down)
[r3-GigabitEthernet0/0/0]
Jan 21 2022 17:37:45-08:00 r3 %%01OSPF/3/NBR_DOWN_REASON(l)[1]:Neighbor state le
aves full or changed to Down. (ProcessId=25600, NeighborRouterId=2.2.2.2, Neighb
orAreaId=16777216, NeighborInterface=GigabitEthernet0/0/0,NeighborDownImmediate
reason=Neighbor Down Due to Inactivity, NeighborDownPrimeReason=Hello Not Seen,
NeighborChangeTime=2022-01-21 17:37:45-08:00)
[r3-GigabitEthernet0/0/0]os
[r3-GigabitEthernet0/0/0]ospf a
[r3-GigabitEthernet0/0/0]ospf authentication-mode m
[r3-GigabitEthernet0/0/0]ospf authentication-mode md5
[r3-GigabitEthernet0/0/0]
Jan 21 2022 17:37:57-08:00 r3 %%01OSPF/4/NBR_CHANGE_E(l)[2]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=25600, NeighborAddress=1.96.16.172, Neig
hborEvent=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init)
[r3-GigabitEthernet0/0/0]
Jan 21 2022 17:38:00-08:00 r3 %%01OSPF/4/NBR_CHANGE_E(l)[3]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=25600, NeighborAddress=1.96.16.172, Neig
hborEvent=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=ExStart
)
[r3-GigabitEthernet0/0/0]
Jan 21 2022 17:38:00-08:00 r3 %%01OSPF/4/NBR_CHANGE_E(l)[4]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=25600, NeighborAddress=1.96.16.172, Neig
hborEvent=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState=E
xchange)
[r3-GigabitEthernet0/0/0]
Jan 21 2022 17:38:00-08:00 r3 %%01OSPF/4/NBR_CHANGE_E(l)[5]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=25600, NeighborAddress=1.96.16.172, Neig
hborEvent=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=Loa
ding)
[r3-GigabitEthernet0/0/0]
Jan 21 2022 17:38:00-08:00 r3 %%01OSPF/4/NBR_CHANGE_E(l)[6]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=25600, NeighborAddress=1.96.16.172, Neig
hborEvent=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Full)
[r3-GigabitEthernet0/0/0]qu
[r3-GigabitEthernet0/0/0]quit
[r3]os
[r3]ospf 100
[r3-ospf-100]are
[r3-ospf-100]area 1
[r3-ospf-100-area-0.0.0.1]a
[r3-ospf-100-area-0.0.0.1]abr-summary
[r3-ospf-100-area-0.0.0.1]arp-ping
[r3-ospf-100-area-0.0.0.1]authentication-mode
[r3-ospf-100-area-0.0.0.1]abr-summary
[r3-ospf-100-area-0.0.0.1]arp-ping
[r3-ospf-100-area-0.0.0.1]authentication-mode s
[r3-ospf-100-area-0.0.0.1]authentication-mode simple
[r3-ospf-100-area-0.0.0.1]authentication-mode simple c
[r3-ospf-100-area-0.0.0.1]authentication-mode simple cipher 123
[r3-ospf-100-area-0.0.0.1]ab
[r3-ospf-100-area-0.0.0.1]abr-summary 172.16.64.0 255.255.192.0
[r3-ospf-100-area-0.0.0.1]
R4
change)
[r4-ospf-100]
Jan 21 2022 17:23:15-08:00 r4 %%01OSPF/4/NBR_CHANGE_E(l)[9]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=25600, NeighborAddress=5.0.16.172, Neigh
borEvent=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=Load
ing)
[r4-ospf-100]
Jan 21 2022 17:23:15-08:00 r4 %%01OSPF/4/NBR_CHANGE_E(l)[10]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=25600, NeighborAddress=5.0.16.172, Neig
hborEvent=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Full)
[r4-ospf-100]
Jan 21 2022 17:26:33-08:00 r4 %%01OSPF/4/NBR_CHANGE_E(l)[11]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=25600, NeighborAddress=2.136.16.172, Ne
ighborEvent=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init
)
[r4-ospf-100]
Jan 21 2022 17:26:42-08:00 r4 %%01OSPF/4/NBR_CHANGE_E(l)[12]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=25600, NeighborAddress=2.136.16.172, Ne
ighborEvent=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=ExSta
rt)
[r4-ospf-100]
Jan 21 2022 17:26:42-08:00 r4 %%01OSPF/4/NBR_CHANGE_E(l)[13]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=25600, NeighborAddress=2.136.16.172, Ne
ighborEvent=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState
=Exchange)
[r4-ospf-100]
Jan 21 2022 17:26:42-08:00 r4 %%01OSPF/4/NBR_CHANGE_E(l)[14]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=25600, NeighborAddress=2.136.16.172, Ne
ighborEvent=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=L
oading)
[r4-ospf-100]
Jan 21 2022 17:26:42-08:00 r4 %%01OSPF/4/NBR_CHANGE_E(l)[15]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=25600, NeighborAddress=2.136.16.172, Ne
ighborEvent=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Ful
l)
[r4-ospf-100]
Please check whether system data has been changed, and save data in time
Configuration console time out, please press any key to log on
<r4>sy
<r4>system-view
Enter system view, return user view with Ctrl+Z.
[r4]os
[r4]ospf 100
[r4-ospf-100]ar
[r4-ospf-100]are
[r4-ospf-100]area 2
[r4-ospf-100-area-0.0.0.2]undo ne
[r4-ospf-100-area-0.0.0.2]undo network 172.16.128.1 0.0.0.0
[r4-ospf-100-area-0.0.0.2]qu
[r4-ospf-100-area-0.0.0.2]quit
[r4-ospf-100]de
[r4-ospf-100]default
[r4-ospf-100]default-route-advertise a
[r4-ospf-100]default-route-advertise always
[r4-ospf-100]qu
[r4-ospf-100]quit
[r4]int
[r4]interface g0/0/0
[r4-GigabitEthernet0/0/0]os
[r4-GigabitEthernet0/0/0]ospf dr
[r4-GigabitEthernet0/0/0]ospf dr-priority 0
Jan 21 2022 17:33:52-08:00 r4 %%01OSPF/3/NBR_CHG_DOWN(l)[0]:Neighbor event:neigh
bor state changed to Down. (ProcessId=25600, NeighborAddress=3.3.3.3, NeighborEv
ent=KillNbr, NeighborPreviousState=Full, NeighborCurrentState=Down)
[r4-GigabitEthernet0/0/0]
[r4-GigabitEthernet0/0/0]
Jan 21 2022 17:33:52-08:00 r4 %%01OSPF/3/NBR_DOWN_REASON(l)[1]:Neighbor state le
aves full or changed to Down. (ProcessId=25600, NeighborRouterId=3.3.3.3, Neighb
orAreaId=0, NeighborInterface=GigabitEthernet0/0/0,NeighborDownImmediate reason=
Neighbor Down Due to Kill Neighbor, NeighborDownPrimeReason=Interface Parameter
Mismatch, NeighborChangeTime=2022-01-21 17:33:52-08:00)
[r4-GigabitEthernet0/0/0]
Jan 21 2022 17:33:52-08:00 r4 %%01OSPF/3/NBR_CHG_DOWN(l)[2]:Neighbor event:neigh
bor state changed to Down. (ProcessId=25600, NeighborAddress=5.5.5.5, NeighborEv
ent=KillNbr, NeighborPreviousState=Full, NeighborCurrentState=Down)
[r4-GigabitEthernet0/0/0]
Jan 21 2022 17:33:52-08:00 r4 %%01OSPF/3/NBR_DOWN_REASON(l)[3]:Neighbor state le
aves full or changed to Down. (ProcessId=25600, NeighborRouterId=5.5.5.5, Neighb
orAreaId=0, NeighborInterface=GigabitEthernet0/0/0,NeighborDownImmediate reason=
Neighbor Down Due to Kill Neighbor, NeighborDownPrimeReason=Interface Parameter
Mismatch, NeighborChangeTime=2022-01-21 17:33:52-08:00)
[r4-GigabitEthernet0/0/0]
Jan 21 2022 17:33:52-08:00 r4 %%01OSPF/3/NBR_CHG_DOWN(l)[4]:Neighbor event:neigh
bor state changed to Down. (ProcessId=25600, NeighborAddress=6.6.6.6, NeighborEv
ent=KillNbr, NeighborPreviousState=Full, NeighborCurrentState=Down)
[r4-GigabitEthernet0/0/0]
Jan 21 2022 17:33:52-08:00 r4 %%01OSPF/3/NBR_DOWN_REASON(l)[5]:Neighbor state le
aves full or changed to Down. (ProcessId=25600, NeighborRouterId=6.6.6.6, Neighb
orAreaId=0, NeighborInterface=GigabitEthernet0/0/0,NeighborDownImmediate reason=
Neighbor Down Due to Kill Neighbor, NeighborDownPrimeReason=Interface Parameter
Mismatch, NeighborChangeTime=2022-01-21 17:33:52-08:00)
[r4-GigabitEthernet0/0/0]
Jan 21 2022 17:33:53-08:00 r4 %%01OSPF/4/NBR_CHANGE_E(l)[6]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=25600, NeighborAddress=5.0.16.172, Neigh
borEvent=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init)
[r4-GigabitEthernet0/0/0]
Jan 21 2022 17:33:53-08:00 r4 %%01OSPF/4/NBR_CHANGE_E(l)[7]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=25600, NeighborAddress=5.0.16.172, Neigh
borEvent=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=2Way)
[r4-GigabitEthernet0/0/0]
Jan 21 2022 17:33:53-08:00 r4 %%01OSPF/4/NBR_CHANGE_E(l)[8]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=25600, NeighborAddress=5.0.16.172, Neigh
borEvent=AdjOk?, NeighborPreviousState=2Way, NeighborCurrentState=ExStart)
[r4-GigabitEthernet0/0/0]
Jan 21 2022 17:33:54-08:00 r4 %%01OSPF/4/NBR_CHANGE_E(l)[9]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=25600, NeighborAddress=3.0.16.172, Neigh
borEvent=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init)
[r4-GigabitEthernet0/0/0]
Jan 21 2022 17:33:54-08:00 r4 %%01OSPF/4/NBR_CHANGE_E(l)[10]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=25600, NeighborAddress=3.0.16.172, Neig
hborEvent=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=2Way)
[r4-GigabitEthernet0/0/0]
Jan 21 2022 17:33:54-08:00 r4 %%01OSPF/4/NBR_CHANGE_E(l)[11]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=25600, NeighborAddress=3.0.16.172, Neig
hborEvent=AdjOk?, NeighborPreviousState=2Way, NeighborCurrentState=ExStart)
[r4-GigabitEthernet0/0/0]
Jan 21 2022 17:33:54-08:00 r4 %%01OSPF/4/NBR_CHANGE_E(l)[12]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=25600, NeighborAddress=3.0.16.172, Neig
hborEvent=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState=E
xchange)
[r4-GigabitEthernet0/0/0]
Jan 21 2022 17:33:54-08:00 r4 %%01OSPF/4/NBR_CHANGE_E(l)[13]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=25600, NeighborAddress=3.0.16.172, Neig
hborEvent=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=Loa
ding)
[r4-GigabitEthernet0/0/0]
Jan 21 2022 17:33:54-08:00 r4 %%01OSPF/4/NBR_CHANGE_E(l)[14]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=25600, NeighborAddress=3.0.16.172, Neig
hborEvent=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Full)
[r4-GigabitEthernet0/0/0]
Jan 21 2022 17:33:56-08:00 r4 %%01OSPF/4/NBR_CHANGE_E(l)[15]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=25600, NeighborAddress=6.0.16.172, Neig
hborEvent=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init)
[r4-GigabitEthernet0/0/0]
Jan 21 2022 17:33:56-08:00 r4 %%01OSPF/4/NBR_CHANGE_E(l)[16]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=25600, NeighborAddress=6.0.16.172, Neig
hborEvent=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=2Way)
[r4-GigabitEthernet0/0/0]
Jan 21 2022 17:33:56-08:00 r4 %%01OSPF/4/NBR_CHANGE_E(l)[17]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=25600, NeighborAddress=5.0.16.172, Neig
hborEvent=AdjOk?, NeighborPreviousState=ExStart, NeighborCurrentState=2Way)
[r4-GigabitEthernet0/0/0]
Jan 21 2022 17:33:56-08:00 r4 %%01OSPF/4/NBR_CHANGE_E(l)[18]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=25600, NeighborAddress=6.0.16.172, Neig
hborEvent=AdjOk?, NeighborPreviousState=2Way, NeighborCurrentState=ExStart)
[r4-GigabitEthernet0/0/0]
Jan 21 2022 17:33:56-08:00 r4 %%01OSPF/4/NBR_CHANGE_E(l)[19]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=25600, NeighborAddress=6.0.16.172, Neig
hborEvent=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState=E
xchange)
[r4-GigabitEthernet0/0/0]
Jan 21 2022 17:33:56-08:00 r4 %%01OSPF/4/NBR_CHANGE_E(l)[20]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=25600, NeighborAddress=6.0.16.172, Neig
hborEvent=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=Loa
ding)
[r4-GigabitEthernet0/0/0]
Jan 21 2022 17:33:56-08:00 r4 %%01OSPF/4/NBR_CHANGE_E(l)[21]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=25600, NeighborAddress=6.0.16.172, Neig
hborEvent=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Full)
[r4-GigabitEthernet0/0/0]
Jan 21 2022 17:34:30-08:00 r4 %%01OSPF/4/NBR_CHANGE_E(l)[22]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=25600, NeighborAddress=5.0.16.172, Neig
hborEvent=1-Way, NeighborPreviousState=2Way, NeighborCurrentState=Init)
[r4-GigabitEthernet0/0/0]
Jan 21 2022 17:34:41-08:00 r4 %%01OSPF/4/NBR_CHANGE_E(l)[23]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=25600, NeighborAddress=5.0.16.172, Neig
hborEvent=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=2Way)
[r4-GigabitEthernet0/0/0]
Jan 21 2022 17:34:41-08:00 r4 %%01OSPF/4/NBR_CHANGE_E(l)[24]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=25600, NeighborAddress=5.0.16.172, Neig
hborEvent=AdjOk?, NeighborPreviousState=2Way, NeighborCurrentState=2Way)
[r4-GigabitEthernet0/0/0]
Jan 21 2022 17:34:44-08:00 r4 %%01OSPF/3/NBR_DOWN_REASON(l)[25]:Neighbor state l
eaves full or changed to Down. (ProcessId=25600, NeighborRouterId=6.6.6.6, Neigh
borAreaId=0, NeighborInterface=GigabitEthernet0/0/0,NeighborDownImmediate reason
=Neighbor Down Due to 1-Wayhello Received, NeighborDownPrimeReason=1-Wayhello Re
ceived, NeighborChangeTime=2022-01-21 17:34:44-08:00)
[r4-GigabitEthernet0/0/0]
Jan 21 2022 17:34:44-08:00 r4 %%01OSPF/4/NBR_CHANGE_E(l)[26]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=25600, NeighborAddress=6.0.16.172, Neig
hborEvent=1-Way, NeighborPreviousState=Full, NeighborCurrentState=Init)
[r4-GigabitEthernet0/0/0]
Jan 21 2022 17:34:44-08:00 r4 %%01OSPF/4/NBR_CHANGE_E(l)[27]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=25600, NeighborAddress=5.0.16.172, Neig
hborEvent=AdjOk?, NeighborPreviousState=2Way, NeighborCurrentState=2Way)
[r4-GigabitEthernet0/0/0]
Jan 21 2022 17:34:54-08:00 r4 %%01OSPF/4/NBR_CHANGE_E(l)[28]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=25600, NeighborAddress=6.0.16.172, Neig
hborEvent=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=2Way)
[r4-GigabitEthernet0/0/0]
Jan 21 2022 17:34:54-08:00 r4 %%01OSPF/4/NBR_CHANGE_E(l)[29]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=25600, NeighborAddress=5.0.16.172, Neig
hborEvent=AdjOk?, NeighborPreviousState=2Way, NeighborCurrentState=2Way)
[r4-GigabitEthernet0/0/0]
Jan 21 2022 17:34:54-08:00 r4 %%01OSPF/4/NBR_CHANGE_E(l)[30]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=25600, NeighborAddress=6.0.16.172, Neig
hborEvent=AdjOk?, NeighborPreviousState=2Way, NeighborCurrentState=2Way)
[r4-GigabitEthernet0/0/0]
Please check whether system data has been changed, and save data in time
Configuration console time out, please press any key to log on
<r4>sy
<r4>system-view
<r4>system-view
Enter system view, return user view with Ctrl+Z.
[r4]os
[r4]ospf 100
[r4-ospf-100]are
[r4-ospf-100]area 2
[r4-ospf-100-area-0.0.0.2]a
[r4-ospf-100-area-0.0.0.2]abr-summary
[r4-ospf-100-area-0.0.0.2]arp-ping
[r4-ospf-100-area-0.0.0.2]authentication-mode s
[r4-ospf-100-area-0.0.0.2]authentication-mode simple c
[r4-ospf-100-area-0.0.0.2]authentication-mode simple cipher 123
[r4-ospf-100-area-0.0.0.2]a
[r4-ospf-100-area-0.0.0.2]abr-summary
[r4-ospf-100-area-0.0.0.2]arp-ping
[r4-ospf-100-area-0.0.0.2]authentication-mode m
[r4-ospf-100-area-0.0.0.2]authentication-mode md5
[r4-ospf-100-area-0.0.0.2]
R5
[r5-ospf-100]
Jan 21 2022 17:28:06-08:00 r5 %%01OSPF/4/NBR_CHANGE_E(l)[23]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=25600, NeighborAddress=2.152.16.172, Ne
ighborEvent=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState
=Exchange)
[r5-ospf-100]
Jan 21 2022 17:28:06-08:00 r5 %%01OSPF/4/NBR_CHANGE_E(l)[24]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=25600, NeighborAddress=2.152.16.172, Ne
ighborEvent=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=L
oading)
[r5-ospf-100]
Jan 21 2022 17:28:06-08:00 r5 %%01OSPF/4/NBR_CHANGE_E(l)[25]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=25600, NeighborAddress=2.152.16.172, Ne
ighborEvent=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Ful
l)
[r5-ospf-100]
Please check whether system data has been changed, and save data in time
Configuration console time out, please press any key to log on
<r5>y
<r5>sy
<r5>system-view
Enter system view, return user view with Ctrl+Z.
[r5]int
[r5]interface g0/0/0
[r5-GigabitEthernet0/0/0]os
[r5-GigabitEthernet0/0/0]ospf dr
[r5-GigabitEthernet0/0/0]ospf dr-priority 0
Jan 21 2022 17:34:30-08:00 r5 %%01OSPF/3/NBR_CHG_DOWN(l)[0]:Neighbor event:neigh
bor state changed to Down. (ProcessId=25600, NeighborAddress=3.3.3.3, NeighborEv
ent=KillNbr, NeighborPreviousState=Full, NeighborCurrentState=Down)
[r5-GigabitEthernet0/0/0]
[r5-GigabitEthernet0/0/0]
Jan 21 2022 17:34:30-08:00 r5 %%01OSPF/3/NBR_DOWN_REASON(l)[1]:Neighbor state le
aves full or changed to Down. (ProcessId=25600, NeighborRouterId=3.3.3.3, Neighb
orAreaId=0, NeighborInterface=GigabitEthernet0/0/0,NeighborDownImmediate reason=
Neighbor Down Due to Kill Neighbor, NeighborDownPrimeReason=Interface Parameter
Mismatch, NeighborChangeTime=2022-01-21 17:34:30-08:00)
[r5-GigabitEthernet0/0/0]
Jan 21 2022 17:34:30-08:00 r5 %%01OSPF/3/NBR_CHG_DOWN(l)[2]:Neighbor event:neigh
bor state changed to Down. (ProcessId=25600, NeighborAddress=4.4.4.4, NeighborEv
ent=KillNbr, NeighborPreviousState=2Way, NeighborCurrentState=Down)
[r5-GigabitEthernet0/0/0]
Jan 21 2022 17:34:30-08:00 r5 %%01OSPF/3/NBR_DOWN_REASON(l)[3]:Neighbor state le
aves full or changed to Down. (ProcessId=25600, NeighborRouterId=4.4.4.4, Neighb
orAreaId=0, NeighborInterface=GigabitEthernet0/0/0,NeighborDownImmediate reason=
Neighbor Down Due to Kill Neighbor, NeighborDownPrimeReason=Interface Parameter
Mismatch, NeighborChangeTime=2022-01-21 17:34:30-08:00)
[r5-GigabitEthernet0/0/0]
Jan 21 2022 17:34:30-08:00 r5 %%01OSPF/3/NBR_CHG_DOWN(l)[4]:Neighbor event:neigh
bor state changed to Down. (ProcessId=25600, NeighborAddress=6.6.6.6, NeighborEv
ent=KillNbr, NeighborPreviousState=Full, NeighborCurrentState=Down)
[r5-GigabitEthernet0/0/0]
Jan 21 2022 17:34:30-08:00 r5 %%01OSPF/3/NBR_DOWN_REASON(l)[5]:Neighbor state le
aves full or changed to Down. (ProcessId=25600, NeighborRouterId=6.6.6.6, Neighb
orAreaId=0, NeighborInterface=GigabitEthernet0/0/0,NeighborDownImmediate reason=
Neighbor Down Due to Kill Neighbor, NeighborDownPrimeReason=Interface Parameter
Mismatch, NeighborChangeTime=2022-01-21 17:34:30-08:00)
[r5-GigabitEthernet0/0/0]
Jan 21 2022 17:34:31-08:00 r5 %%01OSPF/4/NBR_CHANGE_E(l)[6]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=25600, NeighborAddress=4.0.16.172, Neigh
borEvent=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init)
[r5-GigabitEthernet0/0/0]
Jan 21 2022 17:34:31-08:00 r5 %%01OSPF/4/NBR_CHANGE_E(l)[7]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=25600, NeighborAddress=4.0.16.172, Neigh
borEvent=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=2Way)
[r5-GigabitEthernet0/0/0]
Jan 21 2022 17:34:31-08:00 r5 %%01OSPF/4/NBR_CHANGE_E(l)[8]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=25600, NeighborAddress=4.0.16.172, Neigh
borEvent=AdjOk?, NeighborPreviousState=2Way, NeighborCurrentState=2Way)
[r5-GigabitEthernet0/0/0]
Jan 21 2022 17:34:32-08:00 r5 %%01OSPF/4/NBR_CHANGE_E(l)[9]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=25600, NeighborAddress=6.0.16.172, Neigh
borEvent=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init)
[r5-GigabitEthernet0/0/0]
Jan 21 2022 17:34:32-08:00 r5 %%01OSPF/4/NBR_CHANGE_E(l)[10]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=25600, NeighborAddress=6.0.16.172, Neig
hborEvent=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=2Way)
[r5-GigabitEthernet0/0/0]
Jan 21 2022 17:34:32-08:00 r5 %%01OSPF/4/NBR_CHANGE_E(l)[11]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=25600, NeighborAddress=4.0.16.172, Neig
hborEvent=AdjOk?, NeighborPreviousState=2Way, NeighborCurrentState=2Way)
[r5-GigabitEthernet0/0/0]
Jan 21 2022 17:34:32-08:00 r5 %%01OSPF/4/NBR_CHANGE_E(l)[12]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=25600, NeighborAddress=6.0.16.172, Neig
hborEvent=AdjOk?, NeighborPreviousState=2Way, NeighborCurrentState=ExStart)
[r5-GigabitEthernet0/0/0]
Jan 21 2022 17:34:32-08:00 r5 %%01OSPF/4/NBR_CHANGE_E(l)[13]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=25600, NeighborAddress=6.0.16.172, Neig
hborEvent=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState=E
xchange)
[r5-GigabitEthernet0/0/0]
Jan 21 2022 17:34:32-08:00 r5 %%01OSPF/4/NBR_CHANGE_E(l)[14]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=25600, NeighborAddress=6.0.16.172, Neig
hborEvent=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=Loa
ding)
[r5-GigabitEthernet0/0/0]
Jan 21 2022 17:34:32-08:00 r5 %%01OSPF/4/NBR_CHANGE_E(l)[15]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=25600, NeighborAddress=6.0.16.172, Neig
hborEvent=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Full)
[r5-GigabitEthernet0/0/0]
Jan 21 2022 17:34:37-08:00 r5 %%01OSPF/4/NBR_CHANGE_E(l)[16]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=25600, NeighborAddress=3.0.16.172, Neig
hborEvent=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init)
[r5-GigabitEthernet0/0/0]
Jan 21 2022 17:34:37-08:00 r5 %%01OSPF/4/NBR_CHANGE_E(l)[17]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=25600, NeighborAddress=3.0.16.172, Neig
hborEvent=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=2Way)
[r5-GigabitEthernet0/0/0]
Jan 21 2022 17:34:37-08:00 r5 %%01OSPF/4/NBR_CHANGE_E(l)[18]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=25600, NeighborAddress=3.0.16.172, Neig
hborEvent=AdjOk?, NeighborPreviousState=2Way, NeighborCurrentState=ExStart)
[r5-GigabitEthernet0/0/0]
Jan 21 2022 17:34:37-08:00 r5 %%01OSPF/4/NBR_CHANGE_E(l)[19]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=25600, NeighborAddress=4.0.16.172, Neig
hborEvent=AdjOk?, NeighborPreviousState=2Way, NeighborCurrentState=2Way)
[r5-GigabitEthernet0/0/0]
Jan 21 2022 17:34:37-08:00 r5 %%01OSPF/4/NBR_CHANGE_E(l)[20]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=25600, NeighborAddress=3.0.16.172, Neig
hborEvent=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState=E
xchange)
[r5-GigabitEthernet0/0/0]
Jan 21 2022 17:34:37-08:00 r5 %%01OSPF/4/NBR_CHANGE_E(l)[21]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=25600, NeighborAddress=3.0.16.172, Neig
hborEvent=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=Loa
ding)
[r5-GigabitEthernet0/0/0]
Jan 21 2022 17:34:37-08:00 r5 %%01OSPF/4/NBR_CHANGE_E(l)[22]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=25600, NeighborAddress=3.0.16.172, Neig
hborEvent=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Full)
[r5-GigabitEthernet0/0/0]
Jan 21 2022 17:34:44-08:00 r5 %%01OSPF/3/NBR_DOWN_REASON(l)[23]:Neighbor state l
eaves full or changed to Down. (ProcessId=25600, NeighborRouterId=6.6.6.6, Neigh
borAreaId=0, NeighborInterface=GigabitEthernet0/0/0,NeighborDownImmediate reason
=Neighbor Down Due to 1-Wayhello Received, NeighborDownPrimeReason=1-Wayhello Re
ceived, NeighborChangeTime=2022-01-21 17:34:44-08:00)
[r5-GigabitEthernet0/0/0]
Jan 21 2022 17:34:44-08:00 r5 %%01OSPF/4/NBR_CHANGE_E(l)[24]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=25600, NeighborAddress=6.0.16.172, Neig
hborEvent=1-Way, NeighborPreviousState=Full, NeighborCurrentState=Init)
[r5-GigabitEthernet0/0/0]
Jan 21 2022 17:34:44-08:00 r5 %%01OSPF/4/NBR_CHANGE_E(l)[25]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=25600, NeighborAddress=4.0.16.172, Neig
hborEvent=AdjOk?, NeighborPreviousState=2Way, NeighborCurrentState=2Way)
[r5-GigabitEthernet0/0/0]
Jan 21 2022 17:34:54-08:00 r5 %%01OSPF/4/NBR_CHANGE_E(l)[26]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=25600, NeighborAddress=6.0.16.172, Neig
hborEvent=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=2Way)
[r5-GigabitEthernet0/0/0]
Jan 21 2022 17:34:54-08:00 r5 %%01OSPF/4/NBR_CHANGE_E(l)[27]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=25600, NeighborAddress=4.0.16.172, Neig
hborEvent=AdjOk?, NeighborPreviousState=2Way, NeighborCurrentState=2Way)
[r5-GigabitEthernet0/0/0]
Jan 21 2022 17:34:54-08:00 r5 %%01OSPF/4/NBR_CHANGE_E(l)[28]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=25600, NeighborAddress=6.0.16.172, Neig
hborEvent=AdjOk?, NeighborPreviousState=2Way, NeighborCurrentState=2Way)
[r5-GigabitEthernet0/0/0]
Please check whether system data has been changed, and save data in time
Configuration console time out, please press any key to log on
<r5>sy
<r5>system-view
Enter system view, return user view with Ctrl+Z.
[r5]os
[r5]ospf 100
[r5-ospf-100]are
[r5-ospf-100]area 2
[r5-ospf-100-area-0.0.0.2]a
[r5-ospf-100-area-0.0.0.2]abr-summary
[r5-ospf-100-area-0.0.0.2]arp-ping
[r5-ospf-100-area-0.0.0.2]authentication-mode s
[r5-ospf-100-area-0.0.0.2]authentication-mode simple c
[r5-ospf-100-area-0.0.0.2]authentication-mode simple cipher
[r5-ospf-100-area-0.0.0.2]authentication-mode simple cipher 123
[r5-ospf-100-area-0.0.0.2]au
[r5-ospf-100-area-0.0.0.2]authentication-mode m
[r5-ospf-100-area-0.0.0.2]authentication-mode md5
[r5-ospf-100-area-0.0.0.2]
Jan 21 2022 17:41:25-08:00 r5 %%01OSPF/3/NBR_DOWN_REASON(l)[0]:Neighbor state le
aves full or changed to Down. (ProcessId=25600, NeighborRouterId=6.6.6.6, Neighb
orAreaId=33554432, NeighborInterface=GigabitEthernet0/0/1,NeighborDownImmediate
reason=Neighbor Down Due to SequenceNum Mismatch, NeighborDownPrimeReason=M,I,MS
bit or SequenceNum Incorrect, NeighborChangeTime=2022-01-21 17:41:25-08:00)
[r5-ospf-100-area-0.0.0.2]
Jan 21 2022 17:41:25-08:00 r5 %%01OSPF/4/NBR_CHANGE_E(l)[1]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=25600, NeighborAddress=2.152.16.172, Nei
ghborEvent=SeqNumberMismatch, NeighborPreviousState=Full, NeighborCurrentState=E
xStart)
[r5-ospf-100-area-0.0.0.2]
Jan 21 2022 17:41:29-08:00 r5 %%01OSPF/4/NBR_CHANGE_E(l)[2]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=25600, NeighborAddress=2.152.16.172, Nei
ghborEvent=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState=
Exchange)
[r5-ospf-100-area-0.0.0.2]
Jan 21 2022 17:41:29-08:00 r5 %%01OSPF/4/NBR_CHANGE_E(l)[3]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=25600, NeighborAddress=2.152.16.172, Nei
ghborEvent=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=Lo
ading)
[r5-ospf-100-area-0.0.0.2]
Jan 21 2022 17:41:29-08:00 r5 %%01OSPF/4/NBR_CHANGE_E(l)[4]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=25600, NeighborAddress=2.152.16.172, Nei
ghborEvent=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Full
)
[r5-ospf-100-area-0.0.0.2]
Please check whether system data has been changed, and save data in time
Configuration console time out, please press any key to log on
<r5>sy
<r5>system-view
Enter system view, return user view with Ctrl+Z.
[r5]os
[r5]ospf 100
[r5-ospf-100]are
[r5-ospf-100]area 2
[r5-ospf-100-area-0.0.0.2]ab
[r5-ospf-100-area-0.0.0.2]abr-summary 172.16.144.0 255.255.240.0
[r5-ospf-100-area-0.0.0.2]
R6
borEvent=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState=Ex
change)
[r6-ospf-100-area-0.0.0.0]
Jan 21 2022 17:27:42-08:00 r6 %%01OSPF/4/NBR_CHANGE_E(l)[10]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=25600, NeighborAddress=3.0.16.172, Neig
hborEvent=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=Loa
ding)
[r6-ospf-100-area-0.0.0.0]
Jan 21 2022 17:27:42-08:00 r6 %%01OSPF/4/NBR_CHANGE_E(l)[11]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=25600, NeighborAddress=3.0.16.172, Neig
hborEvent=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Full)
[r6-ospf-100-area-0.0.0.0]qu
[r6-ospf-100-area-0.0.0.0]quit
[r6-ospf-100]ar
[r6-ospf-100]area 2
[r6-ospf-100-area-0.0.0.2]
Jan 21 2022 17:27:47-08:00 r6 %%01OSPF/4/NBR_CHANGE_E(l)[12]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=25600, NeighborAddress=5.0.16.172, Neig
hborEvent=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init)
[r6-ospf-100-area-0.0.0.2]
Jan 21 2022 17:27:47-08:00 r6 %%01OSPF/4/NBR_CHANGE_E(l)[13]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=25600, NeighborAddress=5.0.16.172, Neig
hborEvent=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=2Way)
[r6-ospf-100-area-0.0.0.2]
Jan 21 2022 17:27:47-08:00 r6 %%01OSPF/4/NBR_CHANGE_E(l)[14]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=25600, NeighborAddress=5.0.16.172, Neig
hborEvent=AdjOk?, NeighborPreviousState=2Way, NeighborCurrentState=2Way)
[r6-ospf-100-area-0.0.0.2]ne
[r6-ospf-100-area-0.0.0.2]network 172.16.152.2 0.0.0.0
[r6-ospf-100-area-0.0.0.2]ne
[r6-ospf-100-area-0.0.0.2]network
Jan 21 2022 17:28:07-08:00 r6 %%01OSPF/4/NBR_CHANGE_E(l)[15]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=25600, NeighborAddress=1.152.16.172, Ne
ighborEvent=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init
)
[r6-ospf-100-area-0.0.0.2]network
Jan 21 2022 17:28:07-08:00 r6 %%01OSPF/4/NBR_CHANGE_E(l)[16]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=25600, NeighborAddress=1.152.16.172, Ne
ighborEvent=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=2Way)
[r6-ospf-100-area-0.0.0.2]network
Jan 21 2022 17:28:07-08:00 r6 %%01OSPF/4/NBR_CHANGE_E(l)[17]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=25600, NeighborAddress=1.152.16.172, Ne
ighborEvent=AdjOk?, NeighborPreviousState=2Way, NeighborCurrentState=ExStart)
[r6-ospf-100-area-0.0.0.2]network
Jan 21 2022 17:28:07-08:00 r6 %%01OSPF/4/NBR_CHANGE_E(l)[18]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=25600, NeighborAddress=1.152.16.172, Ne
ighborEvent=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState
=Exchange)
[r6-ospf-100-area-0.0.0.2]network
Jan 21 2022 17:28:07-08:00 r6 %%01OSPF/4/NBR_CHANGE_E(l)[19]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=25600, NeighborAddress=1.152.16.172, Ne
ighborEvent=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=L
oading)
[r6-ospf-100-area-0.0.0.2]network
Jan 21 2022 17:28:07-08:00 r6 %%01OSPF/4/NBR_CHANGE_E(l)[20]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=25600, NeighborAddress=1.152.16.172, Ne
ighborEvent=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Ful
l)
[r6-ospf-100-area-0.0.0.2]network 172.16.160.1 0.0.0.0
[r6-ospf-100-area-0.0.0.2]
Please check whether system data has been changed, and save data in time
Configuration console time out, please press any key to log on
<r6>
Jan 21 2022 17:34:33-08:00 r6 %%01OSPF/4/NBR_CHANGE_E(l)[0]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=25600, NeighborAddress=5.0.16.172, Neigh
borEvent=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState=Ex
change)
<r6>
Jan 21 2022 17:34:33-08:00 r6 %%01OSPF/4/NBR_CHANGE_E(l)[1]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=25600, NeighborAddress=5.0.16.172, Neigh
borEvent=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=Load
ing)
<r6>
Jan 21 2022 17:34:33-08:00 r6 %%01OSPF/4/NBR_CHANGE_E(l)[2]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=25600, NeighborAddress=5.0.16.172, Neigh
borEvent=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Full)
<r6>sy
<r6>system-view
Enter system view, return user view with Ctrl+Z.
[r6]int
[r6]interface g0/0/0
[r6-GigabitEthernet0/0/0]os
[r6-GigabitEthernet0/0/0]ospf dr
[r6-GigabitEthernet0/0/0]ospf dr-priority 0
Jan 21 2022 17:34:45-08:00 r6 %%01OSPF/3/NBR_CHG_DOWN(l)[3]:Neighbor event:neigh
bor state changed to Down. (ProcessId=25600, NeighborAddress=3.3.3.3, NeighborEv
ent=KillNbr, NeighborPreviousState=Full, NeighborCurrentState=Down)
[r6-GigabitEthernet0/0/0]
[r6-GigabitEthernet0/0/0]
Jan 21 2022 17:34:45-08:00 r6 %%01OSPF/3/NBR_DOWN_REASON(l)[4]:Neighbor state le
aves full or changed to Down. (ProcessId=25600, NeighborRouterId=3.3.3.3, Neighb
orAreaId=0, NeighborInterface=GigabitEthernet0/0/0,NeighborDownImmediate reason=
Neighbor Down Due to Kill Neighbor, NeighborDownPrimeReason=Interface Parameter
Mismatch, NeighborChangeTime=2022-01-21 17:34:45-08:00)
[r6-GigabitEthernet0/0/0]
Jan 21 2022 17:34:45-08:00 r6 %%01OSPF/3/NBR_CHG_DOWN(l)[5]:Neighbor event:neigh
bor state changed to Down. (ProcessId=25600, NeighborAddress=4.4.4.4, NeighborEv
ent=KillNbr, NeighborPreviousState=Full, NeighborCurrentState=Down)
[r6-GigabitEthernet0/0/0]
Jan 21 2022 17:34:45-08:00 r6 %%01OSPF/3/NBR_DOWN_REASON(l)[6]:Neighbor state le
aves full or changed to Down. (ProcessId=25600, NeighborRouterId=4.4.4.4, Neighb
orAreaId=0, NeighborInterface=GigabitEthernet0/0/0,NeighborDownImmediate reason=
Neighbor Down Due to Kill Neighbor, NeighborDownPrimeReason=Interface Parameter
Mismatch, NeighborChangeTime=2022-01-21 17:34:45-08:00)
[r6-GigabitEthernet0/0/0]
Jan 21 2022 17:34:45-08:00 r6 %%01OSPF/3/NBR_CHG_DOWN(l)[7]:Neighbor event:neigh
bor state changed to Down. (ProcessId=25600, NeighborAddress=5.5.5.5, NeighborEv
ent=KillNbr, NeighborPreviousState=Full, NeighborCurrentState=Down)
[r6-GigabitEthernet0/0/0]
Jan 21 2022 17:34:45-08:00 r6 %%01OSPF/3/NBR_DOWN_REASON(l)[8]:Neighbor state le
aves full or changed to Down. (ProcessId=25600, NeighborRouterId=5.5.5.5, Neighb
orAreaId=0, NeighborInterface=GigabitEthernet0/0/0,NeighborDownImmediate reason=
Neighbor Down Due to Kill Neighbor, NeighborDownPrimeReason=Interface Parameter
Mismatch, NeighborChangeTime=2022-01-21 17:34:45-08:00)
[r6-GigabitEthernet0/0/0]
Jan 21 2022 17:34:48-08:00 r6 %%01OSPF/4/NBR_CHANGE_E(l)[9]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=25600, NeighborAddress=3.0.16.172, Neigh
borEvent=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init)
[r6-GigabitEthernet0/0/0]
Jan 21 2022 17:34:48-08:00 r6 %%01OSPF/4/NBR_CHANGE_E(l)[10]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=25600, NeighborAddress=3.0.16.172, Neig
hborEvent=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=2Way)
[r6-GigabitEthernet0/0/0]
Jan 21 2022 17:34:48-08:00 r6 %%01OSPF/4/NBR_CHANGE_E(l)[11]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=25600, NeighborAddress=3.0.16.172, Neig
hborEvent=AdjOk?, NeighborPreviousState=2Way, NeighborCurrentState=ExStart)
[r6-GigabitEthernet0/0/0]
Jan 21 2022 17:34:48-08:00 r6 %%01OSPF/4/NBR_CHANGE_E(l)[12]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=25600, NeighborAddress=3.0.16.172, Neig
hborEvent=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState=E
xchange)
[r6-GigabitEthernet0/0/0]
Jan 21 2022 17:34:48-08:00 r6 %%01OSPF/4/NBR_CHANGE_E(l)[13]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=25600, NeighborAddress=3.0.16.172, Neig
hborEvent=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=Loa
ding)
[r6-GigabitEthernet0/0/0]
Jan 21 2022 17:34:48-08:00 r6 %%01OSPF/4/NBR_CHANGE_E(l)[14]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=25600, NeighborAddress=3.0.16.172, Neig
hborEvent=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Full)
[r6-GigabitEthernet0/0/0]
Jan 21 2022 17:34:51-08:00 r6 %%01OSPF/4/NBR_CHANGE_E(l)[15]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=25600, NeighborAddress=4.0.16.172, Neig
hborEvent=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init)
[r6-GigabitEthernet0/0/0]
Jan 21 2022 17:34:51-08:00 r6 %%01OSPF/4/NBR_CHANGE_E(l)[16]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=25600, NeighborAddress=4.0.16.172, Neig
hborEvent=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=2Way)
[r6-GigabitEthernet0/0/0]
Jan 21 2022 17:34:51-08:00 r6 %%01OSPF/4/NBR_CHANGE_E(l)[17]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=25600, NeighborAddress=4.0.16.172, Neig
hborEvent=AdjOk?, NeighborPreviousState=2Way, NeighborCurrentState=2Way)
[r6-GigabitEthernet0/0/0]
Jan 21 2022 17:34:52-08:00 r6 %%01OSPF/4/NBR_CHANGE_E(l)[18]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=25600, NeighborAddress=5.0.16.172, Neig
hborEvent=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init)
[r6-GigabitEthernet0/0/0]
Jan 21 2022 17:34:52-08:00 r6 %%01OSPF/4/NBR_CHANGE_E(l)[19]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=25600, NeighborAddress=5.0.16.172, Neig
hborEvent=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=2Way)
[r6-GigabitEthernet0/0/0]
Jan 21 2022 17:34:52-08:00 r6 %%01OSPF/4/NBR_CHANGE_E(l)[20]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=25600, NeighborAddress=4.0.16.172, Neig
hborEvent=AdjOk?, NeighborPreviousState=2Way, NeighborCurrentState=2Way)
[r6-GigabitEthernet0/0/0]
Jan 21 2022 17:34:52-08:00 r6 %%01OSPF/4/NBR_CHANGE_E(l)[21]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=25600, NeighborAddress=5.0.16.172, Neig
hborEvent=AdjOk?, NeighborPreviousState=2Way, NeighborCurrentState=2Way)
[r6-GigabitEthernet0/0/0]
Please check whether system data has been changed, and save data in time
Configuration console time out, please press any key to log on
<r6>sy
<r6>system-view
Enter system view, return user view with Ctrl+Z.
[r6]os
[r6]ospf 100
[r6-ospf-100]ar
[r6-ospf-100]arp-ping
[r6-ospf-100]area 2
[r6-ospf-100-area-0.0.0.2]au
[r6-ospf-100-area-0.0.0.2]authentication-mode s
[r6-ospf-100-area-0.0.0.2]authentication-mode simple c
[r6-ospf-100-area-0.0.0.2]authentication-mode simple cipher 123
[r6-ospf-100-area-0.0.0.2]au
[r6-ospf-100-area-0.0.0.2]authentication-mode m
[r6-ospf-100-area-0.0.0.2]authentication-mode md5
[r6-ospf-100-area-0.0.0.2]
Jan 21 2022 17:41:24-08:00 r6 %%01OSPF/3/NBR_CHG_DOWN(l)[0]:Neighbor event:neigh
bor state changed to Down. (ProcessId=25600, NeighborAddress=5.5.5.5, NeighborEv
ent=InactivityTimer, NeighborPreviousState=Full, NeighborCurrentState=Down)
[r6-ospf-100-area-0.0.0.2]
Jan 21 2022 17:41:24-08:00 r6 %%01OSPF/3/NBR_DOWN_REASON(l)[1]:Neighbor state le
aves full or changed to Down. (ProcessId=25600, NeighborRouterId=5.5.5.5, Neighb
orAreaId=33554432, NeighborInterface=GigabitEthernet0/0/1,NeighborDownImmediate
reason=Neighbor Down Due to Inactivity, NeighborDownPrimeReason=Hello Not Seen,
NeighborChangeTime=2022-01-21 17:41:24-08:00)
[r6-ospf-100-area-0.0.0.2]
Jan 21 2022 17:41:26-08:00 r6 %%01OSPF/4/NBR_CHANGE_E(l)[2]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=25600, NeighborAddress=1.152.16.172, Nei
ghborEvent=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init)
[r6-ospf-100-area-0.0.0.2]
Jan 21 2022 17:41:26-08:00 r6 %%01OSPF/4/NBR_CHANGE_E(l)[3]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=25600, NeighborAddress=1.152.16.172, Nei
ghborEvent=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=ExStar
t)
[r6-ospf-100-area-0.0.0.2]
Jan 21 2022 17:41:30-08:00 r6 %%01OSPF/4/NBR_CHANGE_E(l)[4]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=25600, NeighborAddress=1.152.16.172, Nei
ghborEvent=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState=
Exchange)
[r6-ospf-100-area-0.0.0.2]
Jan 21 2022 17:41:30-08:00 r6 %%01OSPF/4/NBR_CHANGE_E(l)[5]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=25600, NeighborAddress=1.152.16.172, Nei
ghborEvent=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=Lo
ading)
[r6-ospf-100-area-0.0.0.2]
Jan 21 2022 17:41:30-08:00 r6 %%01OSPF/4/NBR_CHANGE_E(l)[6]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=25600, NeighborAddress=1.152.16.172, Nei
ghborEvent=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Full
)
[r6-ospf-100-area-0.0.0.2]ab
[r6-ospf-100-area-0.0.0.2]abr-summary 172.16.128.0 255.255.240.0
[r6-ospf-100-area-0.0.0.2]