linux环境下oracle 11g 静默安装

2023-08-08 17:42:04

安装环境

Linux服务器：oracle linux 6.6 64位

Oracle服务器：Oracle11gR2 64位

系统要求

1、Linux安装Oracle系统要求

系统要求	说明
内存	必须高于1G的物理内存
交换空间	一般为内存的2倍，例如：1G的内存可以设置swap 分区为3G大小
硬盘	5G以上

2、修改操作系统核心参数

在Root用户下执行以下步骤：

1）修改用户的SHELL的限制，修改/etc/security/limits.conf文件

输入命令：vi /etc/security/limits.conf，按i键进入编辑模式，将下列内容加入该文件。

oracle   soft    nproc    2047

oracle   hard    nproc    16384

oracle   soft    nofile     1024

oracle   hard    nofile    65536

编辑完成后按Esc键，输入“:wq”存盘退出

2）修改/etc/pam.d/login
文件，输入命令：vi /etc/pam.d/login，按i键进入编辑模式，将下列内容加入该文件。

session   required
   /lib/security/pam_limits.so

session   required    pam_limits.so

编辑完成后按Esc键，输入“:wq”存盘退出

3）修改linux内核，修改/etc/sysctl.conf文件，输入命令: vi
/etc/sysctl.conf ，按i键进入编辑模式，将下列内容加入该文件

fs.file-max = 6815744

fs.aio-max-nr = 1048576

kernel.shmall = 2097152

kernel.shmmax = 2147483648

kernel.shmmni = 4096

kernel.sem = 250 32000 100 128

net.ipv4.ip_local_port_range = 9000 65500

net.core.rmem_default = 4194304

net.core.rmem_max = 4194304

net.core.wmem_default = 262144

net.core.wmem_max = 1048576

编辑完成后按Esc键，输入“:wq”存盘退出

4）要使
/etc/sysctl.conf 更改立即生效，执行以下命令。输入：sysctl
-p 显示如下：

linux:~ # sysctl -p

net.ipv4.icmp_echo_ignore_broadcasts = 1

net.ipv4.conf.all.rp_filter = 1

fs.file-max = 6815744

fs.aio-max-nr = 1048576

kernel.shmall = 2097152

kernel.shmmax = 2147483648

kernel.shmmni = 4096

kernel.sem = 250 32000 100 128

net.ipv4.ip_local_port_range = 9000 65500

net.core.rmem_default = 4194304

net.core.rmem_max = 4194304

net.core.wmem_default = 262144

net.core.wmem_max = 1048576

5）编辑 /etc/profile ，输入命令：vi /etc/profile，按i键进入编辑模式，将下列内容加入该文件。

if [ $USER = "oracle" ];
then

if [ $SHELL = "/bin/ksh" ]; then

ulimit -p 16384

ulimit -n 65536

else

ulimit -u 16384 -n 65536

fi

编辑完成后按Esc键，输入“:wq”存盘退出

6）创建相关用户和组，作为软件安装和支持组的拥有者。

创建用户，输入命令：

groupadd oinstall

groupadd dba

创建Oracle用户和密码,输入命令：

useradd -g oinstall -g dba -m oracle

passwd oracle

然后会让你输入密码，密码任意输入2次，但必须保持一致，回车确认

7）创建数据库软件目录和数据文件存放目录，目录的位置，根据自己的情况来定，注意磁盘空间即可，这里我把其放到oracle用户下,例如：

输入命令：

mkdir -p /u01/app/oracle

mkdir -p /u01/app/oraInventory

8)更改目录属主为Oracle用户所有，输入命令：

chown -R oracle:oinstall /u01

9)Package安装检查

rpm -q binutils compat-libstdc++-33
elfutils-libelf elfutils-libelf-devel expat gcc gcc-c++ glibc glibc-common
glibc-devel glibc-headers libaio libaio-devel libgcc libstdc++ libstdc++-devel
make pdksh sysstat unixODBC unixODBC-devel | grep "not installed"

安装未安装的package

yum install binutils compat-libstdc++-33
elfutils-libelf elfutils-libelf-devel expat gcc gcc-c++ glibc glibc-common
glibc-devel glibc-headers libaio libaio-devel libgcc libstdc++ libstdc++-devel
make pdksh sysstat unixODBC unixODBC-devel

10)配置oracle用户的环境变量，首先，切换到新创建的oracle用户下,

输入：su – oracle ，然后直接在输入： vi .bash_profile

按i编辑 .bash_profile,进入编辑模式，增加以下内容：

umask 022

export ORACLE_BASE=/u01/app/oracle

export
ORACLE_HOME=$ORACLE_BASE/product/11.2.0/db_1

export ORACLE_SID=ecis

export
PATH=$PATH:$HOME/bin:$ORACLE_HOME/bin

export
LD_LIBRARY_PATH=$ORACLE_HOME/lib:/usr/lib

编辑完成后按Esc键，输入“:wq”存盘退出

安装过程

cd /home/oracle/database

./runInstaller -silent -force -noconfig
-responseFile /home/oracle/database/response /db.rsp

依据打印日志判断安装进度以及按照是否成功

dbca -silent -responseFile
/home/oracle/database/response/dbca.rsp

依据打印日志判断安装进度以及按照是否成功

netca -silent -responsefile
/home/oracle/database/response/netca.rsp

依据打印日志判断安装进度以及按照是否成功

监听问题：

[oracle@localhost admin]$ lsnrctl status

LSNRCTL for Linux: Version 11.2.0.4.0 -
Production on 30-NOV-2016 16:18:08

Connecting to
(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=localhost)(PORT=1521)))

STATUS of the LISTENER

------------------------

Alias LISTENER

Version TNSLSNR for Linux: Version
11.2.0.4.0 - Production

Start Date 30-NOV-2016 16:17:54

Uptime 0 days 0 hr. 0 min. 14 sec

Trace Level off

Security ON: Local OS Authentication

SNMP OFF

Listener Parameter File /u01/app/oracle/product/11.2.0/db_1/network/admin/listener.ora

Listener Log File
/u01/app/oracle/diag/tnslsnr/localhost/listener/alert/log.xml

Listening Endpoints Summary...

(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=localhost)(PORT=1521)))

(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1521)))

The listener supports no
services

The command completed successfully

[oracle@localhost admin]$

解决方法：

登录数据库：

$sqlplus / as sysdba

显示服务名：

SQL>show parameter service_names

强制注册服务：

SQL>alter system register;

查看监听状态：

$lsnrctl status

附录

db_install.rsp 样例

####################################################################

## Copyright(c) Oracle Corporation 1998,
2013. All rights reserved.##

##
##

## Specify values for the variables listed
below to customize ##

## your installation. ##

## ##

## Each variable is associated with a
comment. The comment ##

## can help to populate the variables with
the appropriate ##

## values.
##

## ##

## IMPORTANT NOTE: This file contains plain
text passwords and ##

## should be secured to have read
permission only by oracle user ##

## or db administrator who owns this
installation. ##

##
##

####################################################################

#-------------------------------------------------------------------------------

# Do not change the following system
generated value.

#-------------------------------------------------------------------------------

oracle.install.responseFileVersion=/oracle/install/rspfmt_dbinstall_response_schema_v11_2_0

#-------------------------------------------------------------------------------

# Specify the installation option.

# It can be one of the following:

# -
INSTALL_DB_SWONLY

# -
INSTALL_DB_AND_CONFIG

# -
UPGRADE_DB

#-------------------------------------------------------------------------------

oracle.install.option=INSTALL_DB_SWONLY

#-------------------------------------------------------------------------------

# Specify the hostname of the system as set
during the install. It can be used

# to force the installation to use an
alternative hostname rather than using the

# first hostname found on the system.
(e.g., for systems with multiple hostnames

# and network interfaces)

#-------------------------------------------------------------------------------

ORACLE_HOSTNAME=localhost

#-------------------------------------------------------------------------------

# Specify the Unix group to be set for the
inventory directory.

#-------------------------------------------------------------------------------

UNIX_GROUP_NAME=dba

#-------------------------------------------------------------------------------

# Specify the location which holds the
inventory files.

# This is an optional parameter if
installing on

# Windows based Operating System.

#-------------------------------------------------------------------------------

INVENTORY_LOCATION=/u01/app/oraInventory

#-------------------------------------------------------------------------------

# Specify the languages in which the
components will be installed.

# en
: English ja : Japanese

# fr
: French ko : Korean

# ar
: Arabic es : Latin American Spanish

# bn
: Bengali lv : Latvian

# pt_BR: Brazilian Portuguese lt : Lithuanian

# bg
: Bulgarian ms : Malay

# fr_CA: Canadian French es_MX: Mexican Spanish

# ca
: Catalan no : Norwegian

# hr
: Croatian pl : Polish

# cs
: Czech pt : Portuguese

# da
: Danish ro : Romanian

# nl
: Dutch ru : Russian

# ar_EG: Egyptian zh_CN: Simplified Chinese

# en_GB: English (Great Britain) sk :
Slovak

# et
: Estonian sl : Slovenian

# fi
: Finnish es_ES:
Spanish

# de
: German sv : Swedish

# el
: Greek th : Thai

# iw
: Hebrew zh_TW:
Traditional Chinese

# hu
: Hungarian tr : Turkish

# is
: Icelandic uk : Ukrainian

# in
: Indonesian vi : Vietnamese

# it
: Italian

# all_langs : All languages

# Specify value as the following to select
any of the languages.

# Example : SELECTED_LANGUAGES=en,fr,ja

# Specify value as the following to select
all the languages.

# Example :
SELECTED_LANGUAGES=all_langs

#-------------------------------------------------------------------------------

SELECTED_LANGUAGES=en,zh_CN

#-------------------------------------------------------------------------------

# Specify the complete path of the Oracle
Home.

#-------------------------------------------------------------------------------

ORACLE_HOME=/u01/app/oracle/product/11.2.0/db_1

#-------------------------------------------------------------------------------

# Specify the complete path of the Oracle
Base.

#-------------------------------------------------------------------------------

ORACLE_BASE=/u01/app/oracle

#-------------------------------------------------------------------------------

# Specify the installation edition of the
component.

# The value should contain only one of
these choices.

# -
EE : Enterprise Edition

# -
SE : Standard Edition

# -
SEONE : Standard Edition One

# -
PE : Personal Edition (WINDOWS ONLY)

#-------------------------------------------------------------------------------

oracle.install.db.InstallEdition=EE

#-------------------------------------------------------------------------------

# This variable is used to enable or
disable custom install and is considered

# only if InstallEdition is EE.

# -
true : Components mentioned as part of
'optionalComponents' property

# are considered for install.

# -
false : Value for 'optionalComponents' is not considered.

#-------------------------------------------------------------------------------

oracle.install.db.EEOptionsSelection=false

#-------------------------------------------------------------------------------

# This property is considered only if
'EEOptionsSelection' is set to true

# Description: List of Enterprise Edition
Options you would like to enable.

# The following choices are
available. You may specify any

# combination of these
choices. The components you choose
should

# be specified in the form
"internal-component-name:version"

# Below is a list of components you
may specify to enable.

# oracle.oraolap:11.2.0.4.0 -
Oracle OLAP

# oracle.rdbms.dm:11.2.0.4.0 -
Oracle Data Mining RDBMS Files

# oracle.rdbms.dv:11.2.0.4.0-
Oracle Database Vault option

# oracle.rdbms.lbac:11.2.0.4.0 -
Oracle Label Security

#
oracle.rdbms.partitioning:11.2.0.4.0 - Oracle Partitioning

# oracle.rdbms.rat:11.2.0.4.0 -
Oracle Real Application Testing

#-------------------------------------------------------------------------------

oracle.install.db.optionalComponents=

###############################################################################

#
#

# PRIVILEGED OPERATING SYSTEM GROUPS #

#
------------------------------------------ #

# Provide values for the OS groups to which
OSDBA and OSOPER privileges #

# needs to be granted. If the install is
being performed as a member of the #

# group "dba", then that will be
used unless specified otherwise below.
#

#
#

# The value to be specified for OSDBA and
OSOPER group is only for UNIX based #

# Operating System.
#

#
#

###############################################################################

#------------------------------------------------------------------------------

# The DBA_GROUP is the OS group which is to
be granted OSDBA privileges.

#-------------------------------------------------------------------------------

oracle.install.db.DBA_GROUP=dba

#------------------------------------------------------------------------------

# The OPER_GROUP is the OS group which is
to be granted OSOPER privileges.

# The value to be specified for OSOPER
group is optional.

#------------------------------------------------------------------------------

oracle.install.db.OPER_GROUP=oinstall

#-------------------------------------------------------------------------------

# Specify the cluster node names selected
during the installation.

# Example :
oracle.install.db.CLUSTER_NODES=node1,node2

#-------------------------------------------------------------------------------

oracle.install.db.CLUSTER_NODES=

#------------------------------------------------------------------------------

# This variable is used to enable or
disable RAC One Node install.

# -
true : Value of RAC One Node service
name is used.

# -
false : Value of RAC One Node service name is not used.

# If left blank, it will be assumed to be
false.

#------------------------------------------------------------------------------

oracle.install.db.isRACOneInstall=false

#------------------------------------------------------------------------------

# Specify the name for RAC One Node
Service.

#------------------------------------------------------------------------------

oracle.install.db.racOneServiceName=

#-------------------------------------------------------------------------------

# Specify the type of database to create.

# It can be one of the following:

# -
GENERAL_PURPOSE/TRANSACTION_PROCESSING

# -
DATA_WAREHOUSE

#-------------------------------------------------------------------------------

oracle.install.db.config.starterdb.type=GENERAL_PURPOSE

#-------------------------------------------------------------------------------

# Specify the Starter Database Global
Database Name.

#-------------------------------------------------------------------------------

oracle.install.db.config.starterdb.globalDBName=

#-------------------------------------------------------------------------------

# Specify the Starter Database SID.

#-------------------------------------------------------------------------------

oracle.install.db.config.starterdb.SID=

#-------------------------------------------------------------------------------

# Specify the Starter Database character
set.

#
One of the following

#
AL32UTF8, WE8ISO8859P15, WE8MSWIN1252, EE8ISO8859P2,

#
EE8MSWIN1250, NE8ISO8859P10, NEE8ISO8859P4, BLT8MSWIN1257,

#
BLT8ISO8859P13, CL8ISO8859P5, CL8MSWIN1251, AR8ISO8859P6,

#
AR8MSWIN1256, EL8ISO8859P7, EL8MSWIN1253, IW8ISO8859P8,

#
IW8MSWIN1255, JA16EUC, JA16EUCTILDE, JA16SJIS, JA16SJISTILDE,

#
KO16MSWIN949, ZHS16GBK, TH8TISASCII, ZHT32EUC, ZHT16MSWIN950,

#
ZHT16HKSCS, WE8ISO8859P9, TR8MSWIN1254, VN8MSWIN1258

#-------------------------------------------------------------------------------

oracle.install.db.config.starterdb.characterSet=

#------------------------------------------------------------------------------

# This variable should be set to true if
Automatic Memory Management

# in Database is desired.

# If Automatic Memory Management is not
desired, and memory allocation

# is to be done manually, then set it to
false.

#------------------------------------------------------------------------------

oracle.install.db.config.starterdb.memoryOption=false

#-------------------------------------------------------------------------------

# Specify the total memory allocation for
the database. Value(in MB) should be

# at least 256 MB, and should not exceed
the total physical memory available

# on the system.

# Example: oracle.install.db.config.starterdb.memoryLimit=512

#-------------------------------------------------------------------------------

oracle.install.db.config.starterdb.memoryLimit=

#-------------------------------------------------------------------------------

# This variable controls whether to load
Example Schemas onto

# the starter database or not.

#-------------------------------------------------------------------------------

oracle.install.db.config.starterdb.installExampleSchemas=false

#-------------------------------------------------------------------------------

# This variable includes enabling audit
settings, configuring password profiles

# and revoking some grants to public. These
settings are provided by default.

# These settings may also be disabled.

#-------------------------------------------------------------------------------

oracle.install.db.config.starterdb.enableSecuritySettings=true

###############################################################################

# #

# Passwords can be supplied for the
following four schemas in the #

# starter database: #

#
SYS
            #

#
SYSTEM
#

#
SYSMAN (used by Enterprise Manager) #

#
DBSNMP (used by Enterprise Manager) #

# #

# Same password can be used for all
accounts (not recommended) #

# or different passwords for each account
can be provided (recommended) #

# #

###############################################################################

#------------------------------------------------------------------------------

# This variable holds the password that is
to be used for all schemas in the

# starter database.

#-------------------------------------------------------------------------------

oracle.install.db.config.starterdb.password.ALL=

#-------------------------------------------------------------------------------

# Specify the SYS password for the starter
database.

#-------------------------------------------------------------------------------

oracle.install.db.config.starterdb.password.SYS=

#-------------------------------------------------------------------------------

# Specify the SYSTEM password for the
starter database.

#-------------------------------------------------------------------------------

oracle.install.db.config.starterdb.password.SYSTEM=

#-------------------------------------------------------------------------------

# Specify the SYSMAN password for the
starter database.

#-------------------------------------------------------------------------------

oracle.install.db.config.starterdb.password.SYSMAN=

#-------------------------------------------------------------------------------

# Specify the DBSNMP password for the
starter database.

#-------------------------------------------------------------------------------

oracle.install.db.config.starterdb.password.DBSNMP=

#-------------------------------------------------------------------------------

# Specify the management option to be
selected for the starter database.

# It can be one of the following:

# -
GRID_CONTROL

# -
DB_CONTROL

#-------------------------------------------------------------------------------

oracle.install.db.config.starterdb.control=DB_CONTROL

#-------------------------------------------------------------------------------

# Specify the Management Service to use if
Grid Control is selected to manage

# the database.

#-------------------------------------------------------------------------------

oracle.install.db.config.starterdb.gridcontrol.gridControlServiceURL=

###############################################################################

#
#

# SPECIFY BACKUP AND RECOVERY OPTIONS #

# ------------------------------------ #

# Out-of-box backup and recovery options
for the database can be mentioned #

# using the entries below. #

#
#

###############################################################################

#------------------------------------------------------------------------------

# This variable is to be set to false if
automated backup is not required. Else

# this can be set to true.

#-------------------------------------------------------------------------------

oracle.install.db.config.starterdb.automatedBackup.enable=false

#------------------------------------------------------------------------------

# Regardless of the type of storage that is
chosen for backup and recovery, if

# automated backups are enabled, a job will
be scheduled to run daily to backup

# the database. This job will run as the
operating system user that is

# specified in this variable.

#-------------------------------------------------------------------------------

oracle.install.db.config.starterdb.automatedBackup.osuid=

#-------------------------------------------------------------------------------

# Regardless of the type of storage that is
chosen for backup and recovery, if

# automated backups are enabled, a job will
be scheduled to run daily to backup

# the database. This job will run as the
operating system user specified by the

# above entry. The following entry stores
the password for the above operating

# system user.

#-------------------------------------------------------------------------------

oracle.install.db.config.starterdb.automatedBackup.ospwd=

#-------------------------------------------------------------------------------

# Specify the type of storage to use for
the database.

# It can be one of the following:

# -
FILE_SYSTEM_STORAGE

# -
ASM_STORAGE

#-------------------------------------------------------------------------------

oracle.install.db.config.starterdb.storageType=

#-------------------------------------------------------------------------------

# Specify the database file location which
is a directory for datafiles, control

# files, redo logs.

# Applicable only when
oracle.install.db.config.starterdb.storage=FILE_SYSTEM_STORAGE

#-------------------------------------------------------------------------------

oracle.install.db.config.starterdb.fileSystemStorage.dataLocation=

#-------------------------------------------------------------------------------

# Specify the backup and recovery location.

# Applicable only when
oracle.install.db.config.starterdb.storage=FILE_SYSTEM_STORAGE

#-------------------------------------------------------------------------------

oracle.install.db.config.starterdb.fileSystemStorage.recoveryLocation=

#-------------------------------------------------------------------------------

# Specify the existing ASM disk groups to
be used for storage.

# Applicable only when
oracle.install.db.config.starterdb.storageType=ASM_STORAGE

#-------------------------------------------------------------------------------

oracle.install.db.config.asm.diskGroup=

#-------------------------------------------------------------------------------

# Specify the password for ASMSNMP user of
the ASM instance.

# Applicable only when
oracle.install.db.config.starterdb.storage=ASM_STORAGE

#-------------------------------------------------------------------------------

oracle.install.db.config.asm.ASMSNMPPassword=

#------------------------------------------------------------------------------

# Specify the My Oracle Support Account
Username.

#
Example :
MYORACLESUPPORT_USERNAME=abc@oracle.com

#------------------------------------------------------------------------------

MYORACLESUPPORT_USERNAME=

#------------------------------------------------------------------------------

# Specify the My Oracle Support Account
Username password.

# Example
: MYORACLESUPPORT_PASSWORD=password

#------------------------------------------------------------------------------

MYORACLESUPPORT_PASSWORD=

#------------------------------------------------------------------------------

# Specify whether to enable the user to set
the password for

# My Oracle Support credentials. The value
can be either true or false.

# If left blank it will be assumed to be
false.

# Example
: SECURITY_UPDATES_VIA_MYORACLESUPPORT=true

#------------------------------------------------------------------------------

SECURITY_UPDATES_VIA_MYORACLESUPPORT=false

#------------------------------------------------------------------------------

# Specify whether user doesn't want to
configure Security Updates.

# The value for this variable should be
true if you don't want to configure

# Security Updates, false otherwise.

# The value can be either true or false. If
left blank it will be assumed

# to be false.

# Example
: DECLINE_SECURITY_UPDATES=false

#------------------------------------------------------------------------------

DECLINE_SECURITY_UPDATES=true

#------------------------------------------------------------------------------

# Specify the Proxy server name. Length
should be greater than zero.

# Example
: PROXY_HOST=proxy.domain.com

#------------------------------------------------------------------------------

PROXY_HOST=

#------------------------------------------------------------------------------

# Specify the proxy port number. Should be
Numeric and at least 2 chars.

# Example
: PROXY_PORT=25

#------------------------------------------------------------------------------

PROXY_PORT=

#------------------------------------------------------------------------------

# Specify the proxy user name. Leave
PROXY_USER and PROXY_PWD

# blank if your proxy server requires no
authentication.

# Example
: PROXY_USER=username

#------------------------------------------------------------------------------

PROXY_USER=

#------------------------------------------------------------------------------

# Specify the proxy password. Leave
PROXY_USER and PROXY_PWD

# blank if your proxy server requires no
authentication.

# Example
: PROXY_PWD=password

#------------------------------------------------------------------------------

PROXY_PWD=

#------------------------------------------------------------------------------

# Specify the proxy realm.

# Example
: PROXY_REALM=metalink

#------------------------------------------------------------------------------

PROXY_REALM=

#------------------------------------------------------------------------------

# Specify the Oracle Support Hub URL.

# Example
: COLLECTOR_SUPPORTHUB_URL=https://orasupporthub.company.com:8080/

#------------------------------------------------------------------------------

COLLECTOR_SUPPORTHUB_URL=

#------------------------------------------------------------------------------

# Specify the auto-updates option. It can
be one of the following:

# -
MYORACLESUPPORT_DOWNLOAD

# -
OFFLINE_UPDATES

# -
SKIP_UPDATES

#------------------------------------------------------------------------------

oracle.installer.autoupdates.option=SKIP_UPDATES

#------------------------------------------------------------------------------

# In case MYORACLESUPPORT_DOWNLOAD option
is chosen, specify the location where

# the updates are to be downloaded.

# In case OFFLINE_UPDATES option is chosen,
specify the location where the updates

# are present.

#------------------------------------------------------------------------------

oracle.installer.autoupdates.downloadUpdatesLoc=

#------------------------------------------------------------------------------

# Specify the My Oracle Support Account
Username which has the patches download privileges

# to be used for software updates.

#
Example :
AUTOUPDATES_MYORACLESUPPORT_USERNAME=abc@oracle.com

#------------------------------------------------------------------------------

AUTOUPDATES_MYORACLESUPPORT_USERNAME=

#------------------------------------------------------------------------------

# Specify the My Oracle Support Account
Username password which has the patches download privileges

# to be used for software updates.

# Example
: AUTOUPDATES_MYORACLESUPPORT_PASSWORD=password

#------------------------------------------------------------------------------

AUTOUPDATES_MYORACLESUPPORT_PASSWORD=

dbca.rsp 样例

##############################################################################

##
##

## DBCA response
file ##

##
------------------ ##

## Copyright 1998, 2013, Oracle Corporation. All Rights
Reserved. ##

##
##

## Specify values for the variables listed
below to customize Oracle ##

## Database Configuration
installation. ##

##
##

## Each variable is associated with a
comment. The comment identifies the ##

## variable type.
##

##
##

## Please specify the values in the
following format :
##

##
Type : Example ##

##
String : "<value>" ##

##
Boolean : True or False ##

##
Number : <numeric value> ##

##
StringList :
{"<value1>","<value2>"} ##

##
##

## Examples :
##

##
1. dbca -progress_only -responseFile <response file> ##

##
Display a progress bar depicting progress of database creation ##

##
process.
##

##
##

##
2. dbca -silent -responseFile <response file> ##

##
Creates database silently. No user interface is displayed. ##

## ##

##
3. dbca -silent -createDatabase -cloneTemplate ##

##
-responseFile <response file> ##

##
Creates database silently with clone template. The template in ##

## responsefile is a clone template. ##

##
##

##
4. dbca -silent -deleteDatabase -responseFile <response file> ##

##
Deletes database silently. ##

##############################################################################

#-----------------------------------------------------------------------------

# GENERAL section is required for all types
of database creations.

#-----------------------------------------------------------------------------

[GENERAL]

#-----------------------------------------------------------------------------

# Name : RESPONSEFILE_VERSION

# Datatype : String

# Description : Version of the database to create

# Valid values : "11.1.0"

# Default value : None

# Mandatory : Yes

#-----------------------------------------------------------------------------

RESPONSEFILE_VERSION = "11.2.0"

#-----------------------------------------------------------------------------

# Name : OPERATION_TYPE

# Datatype : String

# Description : Type of operation

# Valid values : "createDatabase" \
"createTemplateFromDB" \ "createCloneTemplate" \
"deleteDatabase" \ "configureDatabase" \
"addInstance" (RAC-only) \ "deleteInstance" (RAC-only)

# Default value : None

# Mandatory : Yes

#-----------------------------------------------------------------------------

OPERATION_TYPE = "createDatabase"

#-----------------------*** End of GENERAL
section ***------------------------

#-----------------------------------------------------------------------------

# CREATEDATABASE section is used when
OPERATION_TYPE is defined as "createDatabase".

#-----------------------------------------------------------------------------

[CREATEDATABASE]

#-----------------------------------------------------------------------------

# Name : GDBNAME

# Datatype : String

# Description : Global database name of the database

# Valid values : <db_name>.<db_domain> - when
database domain isn't NULL

# <db_name> - when database domain is NULL

# Default value : None

# Mandatory : Yes

#-----------------------------------------------------------------------------

GDBNAME = "ecis"

#-----------------------------------------------------------------------------

# Name : RACONENODE

# Datatype : Boolean

# Description : Set to true for RAC One Node database

# Valid values : TRUE\FALSE

# Default value : FALSE

# Mandatory : No

#-----------------------------------------------------------------------------

#RACONENODE
= "false"

#-----------------------------------------------------------------------------

# Name : RACONENODESERVICENAME

# Datatype : String

# Description : Service is required by application to
connect to RAC One

# Node Database

# Valid values : Service Name

# Default value : None

# Mandatory : No [required in case RACONENODE flag is
set to true]

#-----------------------------------------------------------------------------

#RACONENODESERVICENAME =

#-----------------------------------------------------------------------------

# Name : POLICYMANAGED

# Datatype : Boolean

# Description : Set to true if Database is policy managed
and

# set to false if Database is admin managed

# Valid values : TRUE\FALSE

# Default value : FALSE

# Mandatory : No

#-----------------------------------------------------------------------------

#POLICYMANAGED = "false"

#-----------------------------------------------------------------------------

# Name : CREATESERVERPOOL

# Datatype : Boolean

# Description : Set to true if new server pool need to be
created for database

# if this option is specified then the newly
created database

# will use this newly created serverpool.

# Multiple serverpoolname can not be specified
for database

# Valid values : TRUE\FALSE

# Default value : FALSE

# Mandatory : No

#-----------------------------------------------------------------------------

#CREATESERVERPOOL = "false"

#-----------------------------------------------------------------------------

# Name : FORCE

# Datatype : Boolean

# Description : Set to true if new server pool need to be
created by force

# if this option is specified then the newly
created serverpool

# will be assigned server even if no free
servers are available.

# This may affect already running database.

# This flag can be specified for Admin managed
as well as policy managed db.

# Valid values : TRUE\FALSE

# Default value : FALSE

# Mandatory : No

#-----------------------------------------------------------------------------

#FORCE = "false"

#-----------------------------------------------------------------------------

# Name : SERVERPOOLNAME

# Datatype : String

# Description : Only one serverpool name need to be
specified

# if Create Server Pool option is specified.

# Comma-separated list of Serverpool names if
db need to use

# multiple Server pool

# Valid values : ServerPool name

# Default value : None

# Mandatory : No [required in case of RAC service
centric database]

#-----------------------------------------------------------------------------

#SERVERPOOLNAME =

#-----------------------------------------------------------------------------

# Name : CARDINALITY

# Datatype : Number

# Description : Specify Cardinality for create server pool
operation

# Valid values : any positive Integer value

# Default value : Number of qualified nodes
on cluster

# Mandatory : No [Required when a new serverpool need
to be created]

#-----------------------------------------------------------------------------

#CARDINALITY =

#-----------------------------------------------------------------------------

# Name : SID

# Datatype :
String

# Description : System identifier (SID) of the database

# Valid values : Check Oracle11g Administrator's Guide

# Default value : <db_name> specified
in GDBNAME

# Mandatory : No

#-----------------------------------------------------------------------------

SID = "ecis"

#-----------------------------------------------------------------------------

# Name : NODELIST

# Datatype : String

# Description : Comma-separated list of cluster nodes

# Valid values : Cluster node names

# Default value : None

# Mandatory : No (Yes for RAC database-centric
database )

#-----------------------------------------------------------------------------

#NODELIST=

#-----------------------------------------------------------------------------

# Name : TEMPLATENAME

# Datatype : String

# Description : Name of the template

# Valid values : Template file name

# Default value : None

# Mandatory : Yes

#-----------------------------------------------------------------------------

TEMPLATENAME =
"General_Purpose.dbc"

#-----------------------------------------------------------------------------

# Name : OBFUSCATEDPASSWORDS

# Datatype : Boolean

# Description : Set
to true if passwords are encrypted

# Valid values : TRUE\FALSE

# Default value : FALSE

# Mandatory : No

#-----------------------------------------------------------------------------

#OBFUSCATEDPASSWORDS = FALSE

#-----------------------------------------------------------------------------

# Name : SYSPASSWORD

# Datatype : String

# Description : Password for SYS user

# Valid values : Check Oracle11g Administrator's Guide

# Default value : None

# Mandatory : Yes

#-----------------------------------------------------------------------------

#SYSPASSWORD = "password"

#-----------------------------------------------------------------------------

# Name : SYSTEMPASSWORD

# Datatype : String

# Description : Password for SYSTEM user

# Valid values : Check Oracle11g Administrator's Guide

# Default value : None

# Mandatory : Yes

#-----------------------------------------------------------------------------

#SYSTEMPASSWORD = "password"

#-----------------------------------------------------------------------------

# Name : EMCONFIGURATION

# Datatype : String

# Description : Enterprise Manager Configuration Type

# Valid values : CENTRAL|LOCAL|ALL|NONE

# Default value : NONE

# Mandatory : No

#-----------------------------------------------------------------------------

#EMCONFIGURATION = "NONE"

#-----------------------------------------------------------------------------

# Name : DISABLESECURITYCONFIGURATION

# Datatype : String

# Description : Database Security Settings

# Valid values : ALL|NONE|AUDIT|PASSWORD_PROFILE

# Default value : NONE

# Mandatory : No

#-----------------------------------------------------------------------------

#DISABLESECURITYCONFIGURATION =
"NONE"

#-----------------------------------------------------------------------------

# Name : SYSMANPASSWORD

# Datatype : String

# Description : Password for SYSMAN user

# Valid values : Check Oracle11g Administrator's Guide

# Default value : None

# Mandatory : Yes, if LOCAL specified for
EMCONFIGURATION

#-----------------------------------------------------------------------------

#SYSMANPASSWORD = "password"

#-----------------------------------------------------------------------------

# Name : DBSNMPPASSWORD

# Datatype : String

# Description : Password for DBSNMP user

# Valid values : Check Oracle11g Administrator's Guide

# Default value : None

# Mandatory : Yes, if EMCONFIGURATION is specified

#-----------------------------------------------------------------------------

#DBSNMPPASSWORD = "password"

#-----------------------------------------------------------------------------

# Name
: CENTRALAGENT

# Datatype : String

# Description : Grid Control Central Agent Oracle Home

# Default value : None

# Mandatory : Yes, if CENTRAL is specified for
EMCONFIGURATION

#-----------------------------------------------------------------------------

#CENTRALAGENT =

#-----------------------------------------------------------------------------

# Name : HOSTUSERNAME

# Datatype : String

# Description : Host user name for EM backup job

# Default value : None

# Mandatory : Yes, if ALL is specified for
EMCONFIGURATION

#-----------------------------------------------------------------------------

#HOSTUSERNAME =

#-----------------------------------------------------------------------------

# Name : HOSTUSERPASSWORD

# Datatype : String

# Description : Host user password for EM backup job

# Default value : None

# Mandatory : Yes, if ALL is specified for
EMCONFIGURATION

#-----------------------------------------------------------------------------

#HOSTUSERPASSWORD=

#-----------------------------------------------------------------------------

# Name : BACKUPSCHEDULE

# Datatype : String

# Description : Daily backup schedule in the form of hh:mm

# Default value : 2:00

# Mandatory :
Yes, if ALL is specified for EMCONFIGURATION

#-----------------------------------------------------------------------------

#BACKUPSCHEDULE=

#-----------------------------------------------------------------------------

# Name : DVOWNERNAME

# Datatype : String

# Description : DataVault Owner

# Valid values : Check Oracle11g Administrator's Guide

# Default value : None

# Mandatory : Yes, if DataVault option is chosen

#-----------------------------------------------------------------------------

#DVOWNERNAME = ""

#-----------------------------------------------------------------------------

# Name : DVOWNERPASSWORD

# Datatype : String

# Description : Password for DataVault Owner

# Valid values : Check Oracle11g Administrator's Guide

# Default value : None

# Mandatory : Yes, if DataVault option is chosen

#-----------------------------------------------------------------------------

#DVOWNERPASSWORD = ""

#-----------------------------------------------------------------------------

# Name : DVACCOUNTMANAGERNAME

# Datatype : String

# Description : DataVault Account Manager

# Valid values : Check Oracle11g Administrator's Guide

# Default value : None

# Mandatory : No

#-----------------------------------------------------------------------------

#DVACCOUNTMANAGERNAME = ""

#-----------------------------------------------------------------------------

# Name : DVACCOUNTMANAGERPASSWORD

# Datatype : String

# Description : Password for DataVault Account Manager

# Valid values : Check Oracle11g Administrator's Guide

# Default value : None

# Mandatory : No

#-----------------------------------------------------------------------------

#DVACCOUNTMANAGERPASSWORD = ""

#-----------------------------------------------------------------------------

# Name : DATAFILEJARLOCATION

# Datatype : String

# Description : Location of the data file jar

# Valid values : Directory containing compressed datafile
jar

# Default value : None

# Mandatory : No

#-----------------------------------------------------------------------------

#DATAFILEJARLOCATION =

#-----------------------------------------------------------------------------

# Name : DATAFILEDESTINATION

# Datatype : String

# Description : Location of the data file's

# Valid values : Directory for all the database files

# Default value : $ORACLE_BASE/oradata

# Mandatory : No

#-----------------------------------------------------------------------------

#DATAFILEDESTINATION =

#-----------------------------------------------------------------------------

# Name : RECOVERYAREADESTINATION

# Datatype : String

# Description : Location of the data file's

# Valid values : Recovery Area location

# Default value :
$ORACLE_BASE/flash_recovery_area

# Mandatory : No

#-----------------------------------------------------------------------------

#RECOVERYAREADESTINATION=

#-----------------------------------------------------------------------------

# Name : STORAGETYPE

# Datatype : String

# Description : Specifies the storage on which the
database is to be created

# Valid values : FS (CFS for RAC), ASM

# Default value : FS

# Mandatory : No

#-----------------------------------------------------------------------------

#STORAGETYPE=FS

#-----------------------------------------------------------------------------

# Name : DISKGROUPNAME

# Datatype : String

# Description : Specifies the disk group name for the
storage

# Default value : DATA

# Mandatory : No

#-----------------------------------------------------------------------------

#DISKGROUPNAME=DATA

#-----------------------------------------------------------------------------

# Name : ASMSNMP_PASSWORD

# Datatype : String

# Description : Password for ASM Monitoring

# Default value : None

# Mandatory : No

#-----------------------------------------------------------------------------

#ASMSNMP_PASSWORD=""

#-----------------------------------------------------------------------------

# Name : RECOVERYGROUPNAME

# Datatype : String

# Description : Specifies the disk group name for the
recovery area

# Default value : RECOVERY

# Mandatory : No

#-----------------------------------------------------------------------------

#RECOVERYGROUPNAME=RECOVERY

#-----------------------------------------------------------------------------

# Name : CHARACTERSET

# Datatype : String

# Description : Character set of the database

# Valid values : Check Oracle11g National Language Support
Guide

# Default value : "US7ASCII"

# Mandatory : NO

#-----------------------------------------------------------------------------

#CHARACTERSET = "ZHS16GBK"

#-----------------------------------------------------------------------------

# Name : NATIONALCHARACTERSET

# Datatype : String

# Description : National Character set of the database

# Valid values : "UTF8" or "AL16UTF16".
For details, check Oracle11g National Language Support Guide

# Default value : "AL16UTF16"

# Mandatory : No

#-----------------------------------------------------------------------------

NATIONALCHARACTERSET= "AL16UTF16"

#-----------------------------------------------------------------------------

# Name : REGISTERWITHDIRSERVICE

# Datatype : Boolean

# Description : Specifies whether to register with
Directory Service.

# Valid values : TRUE \ FALSE

# Default value : FALSE

# Mandatory : No

#-----------------------------------------------------------------------------

#REGISTERWITHDIRSERVICE= TRUE

#-----------------------------------------------------------------------------

# Name : DIRSERVICEUSERNAME

# Datatype : String

# Description : Specifies the name of the directory
service user

# Mandatory : YES, if the value of registerWithDirService
is TRUE

#-----------------------------------------------------------------------------

#DIRSERVICEUSERNAME= "name"

#-----------------------------------------------------------------------------

# Name : DIRSERVICEPASSWORD

# Datatype : String

# Description : The password of the directory service
user.

# You can also specify the password at the
command prompt instead of here.

# Mandatory : YES, if the value of
registerWithDirService is TRUE

#-----------------------------------------------------------------------------

#DIRSERVICEPASSWORD= "password"

#-----------------------------------------------------------------------------

# Name : WALLETPASSWORD

# Datatype : String

# Description : The password for wallet to created or
modified.

# You can also specify the password at the
command prompt instead of here.

# Mandatory : YES, if the value of
registerWithDirService is TRUE

#-----------------------------------------------------------------------------

#WALLETPASSWORD= "password"

#-----------------------------------------------------------------------------

# Name : LISTENERS

# Datatype : String

# Description : Specifies list of listeners to register the
database with.

# By default the database is configured for all
the listeners specified in the

# $ORACLE_HOME/network/admin/listener.ora

# Valid values : The list should be space separated names
like "listener1 listener2".

# Mandatory : NO

#-----------------------------------------------------------------------------

#LISTENERS = "listener1
listener2"

#-----------------------------------------------------------------------------

# Name : VARIABLESFILE

# Datatype : String

# Description : Location of the file containing variable
value pair

# Valid values : A valid file-system file. The variable
value pair format in this file

# is <variable>=<value>. Each pair
should be in a new line.

# Default value : None

# Mandatory : NO

#-----------------------------------------------------------------------------

#VARIABLESFILE =

#-----------------------------------------------------------------------------

# Name : VARIABLES

# Datatype : String

# Description : comma separated list of name=value pairs.
Overrides variables defined in variablefile and templates

# Default value : None

# Mandatory : NO

#-----------------------------------------------------------------------------

#VARIABLES =

#-----------------------------------------------------------------------------

# Name : INITPARAMS

# Datatype : String

# Description : comma separated list of name=value pairs.
Overrides initialization parameters defined in templates

# Default value : None

# Mandatory : NO

#-----------------------------------------------------------------------------

#INITPARAMS =

#-----------------------------------------------------------------------------

# Name : SAMPLESCHEMA

# Datatype :
Boolean

# Description : Specifies whether or not to add the Sample
Schemas to your database

# Valid values : TRUE \ FALSE

# Default value : FASLE

# Mandatory : No

#-----------------------------------------------------------------------------

#SAMPLESCHEMA=TRUE

#-----------------------------------------------------------------------------

# Name : MEMORYPERCENTAGE

# Datatype : String

# Description : percentage of physical memory for Oracle

# Default value : None

# Mandatory : NO

#-----------------------------------------------------------------------------

#MEMORYPERCENTAGE = "40"

#-----------------------------------------------------------------------------

# Name : DATABASETYPE

# Datatype : String

# Description : used for memory distribution when
MEMORYPERCENTAGE specified

# Valid values : MULTIPURPOSE|DATA_WAREHOUSING|OLTP

# Default value : MULTIPURPOSE

# Mandatory : NO

#-----------------------------------------------------------------------------

#DATABASETYPE = "MULTIPURPOSE"

#-----------------------------------------------------------------------------

# Name : AUTOMATICMEMORYMANAGEMENT

# Datatype : Boolean

# Description : flag to indicate Automatic Memory
Management is used

# Valid values : TRUE/FALSE

# Default value : TRUE

# Mandatory : NO

#-----------------------------------------------------------------------------

#AUTOMATICMEMORYMANAGEMENT =
"TRUE"

#-----------------------------------------------------------------------------

# Name : TOTALMEMORY

# Datatype : String

# Description : total memory in MB to allocate to Oracle

# Valid values :

# Default value :

# Mandatory : NO

#-----------------------------------------------------------------------------

#TOTALMEMORY = "1024"

#-----------------------*** End of
CREATEDATABASE section ***------------------------

#-----------------------------------------------------------------------------

# createTemplateFromDB section is used when
OPERATION_TYPE is defined as "createTemplateFromDB".

#-----------------------------------------------------------------------------

[createTemplateFromDB]

#-----------------------------------------------------------------------------

# Name : SOURCEDB

# Datatype : String

# Description : The source database from which to create
the template

# Valid values : The format is
<host>:<port>:<sid>

# Default value : none

# Mandatory : YES

#-----------------------------------------------------------------------------

SOURCEDB = "myhost:1521:orcl"

#-----------------------------------------------------------------------------

# Name : SYSDBAUSERNAME

# Datatype : String

# Description : A user with DBA role.

# Default value : none

# Mandatory : YES

#-----------------------------------------------------------------------------

SYSDBAUSERNAME = "system"

#-----------------------------------------------------------------------------

# Name : SYSDBAPASSWORD

# Datatype : String

# Description : The password of the DBA user.

# You can also specify the password at the
command prompt instead of here.

# Default value : none

# Mandatory : YES

#-----------------------------------------------------------------------------

#SYSDBAPASSWORD = "password"

#-----------------------------------------------------------------------------

# Name : TEMPLATENAME

# Datatype : String

# Description : Name for the new template.

# Default value : None

# Mandatory : Yes

#-----------------------------------------------------------------------------

TEMPLATENAME = "My Copy TEMPLATE"

#-----------------------*** End of
createTemplateFromDB section ***------------------------

#-----------------------------------------------------------------------------

# createCloneTemplate section is used when
OPERATION_TYPE is defined as "createCloneTemplate".

#-----------------------------------------------------------------------------

[createCloneTemplate]

#-----------------------------------------------------------------------------

# Name : SOURCEDB

# Datatype : String

# Description : The source database is the SID from which
to create the template.

# This database must be local and on the same
ORACLE_HOME.

# Default value : none

# Mandatory : YES

#-----------------------------------------------------------------------------

SOURCEDB = "orcl"

#-----------------------------------------------------------------------------

# Name : SYSDBAUSERNAME

# Datatype : String

# Description : A user with DBA role.

# Default value : none

# Mandatory : YES, if no OS authentication

#-----------------------------------------------------------------------------

#SYSDBAUSERNAME = "sys"

#-----------------------------------------------------------------------------

# Name : SYSDBAPASSWORD

# Datatype : String

# Description : The password of the DBA user.

# You can also specify the password at the
command prompt instead of here.

# Default value : none

# Mandatory : YES

#-----------------------------------------------------------------------------

#SYSDBAPASSWORD = "password"

#-----------------------------------------------------------------------------

# Name : TEMPLATENAME

# Datatype : String

# Description : Name for the new template.

# Default value : None

# Mandatory : Yes

#-----------------------------------------------------------------------------

TEMPLATENAME = "My Clone
TEMPLATE"

#-----------------------------------------------------------------------------

# Name : DATAFILEJARLOCATION

# Datatype : String

# Description : Location of the data file jar

# Valid values : Directory where the new compressed datafile
jar will be placed

# Default value :
$ORACLE_HOME/assistants/dbca/templates

# Mandatory : NO

#-----------------------------------------------------------------------------

#DATAFILEJARLOCATION =

#-----------------------*** End of
createCloneTemplate section ***------------------------

#-----------------------------------------------------------------------------

# DELETEDATABASE section is used when
DELETE_TYPE is defined as "deleteDatabase".

#-----------------------------------------------------------------------------

[DELETEDATABASE]

#-----------------------------------------------------------------------------

# Name : SOURCEDB

# Datatype : String

# Description : The source database is the SID

# This database must be local and on the same
ORACLE_HOME.

# Default value : none

# Mandatory : YES

#-----------------------------------------------------------------------------

SOURCEDB = "orcl"

#-----------------------------------------------------------------------------

# Name : SYSDBAUSERNAME

# Datatype : String

# Description : A user with DBA role.

# Default value : none

# Mandatory : YES, if no OS authentication

#-----------------------------------------------------------------------------

#SYSDBAUSERNAME = "sys"

#-----------------------------------------------------------------------------

# Name : SYSDBAPASSWORD

# Datatype : String

# Description : The password of the DBA user.

# You can also specify the password at the
command prompt instead of here.

# Default value : none

# Mandatory : YES, if no OS authentication

#-----------------------------------------------------------------------------

#SYSDBAPASSWORD = "password"

#-----------------------*** End of
deleteDatabase section ***------------------------

#-----------------------------------------------------------------------------

# GENERATESCRIPTS section

#-----------------------------------------------------------------------------

[generateScripts]

#-----------------------------------------------------------------------------

# Name : TEMPLATENAME

# Datatype : String

# Description : Name of the template

# Valid values : Template name as seen in DBCA

# Default value : None

# Mandatory : Yes

#-----------------------------------------------------------------------------

TEMPLATENAME = "New Database"

#-----------------------------------------------------------------------------

# Name : GDBNAME

# Datatype : String

# Description : Global database name of the database

# Valid values : <db_name>.<db_domain> - when
database domain isn't NULL

# <db_name> - when database domain is NULL

# Default value : None

# Mandatory : Yes

#-----------------------------------------------------------------------------

GDBNAME = "orcl11.us.oracle.com"

#-----------------------------------------------------------------------------

# Name : SCRIPTDESTINATION

# Datatype : String

# Description : Location of the scripts

# Valid values : Directory for all the scripts

# Default value : None

# Mandatory : No

#-----------------------------------------------------------------------------

#SCRIPTDESTINATION =

#-----------------------*** End of
deleteDatabase section ***------------------------

#-----------------------------------------------------------------------------

# CONFIGUREDATABASE section is used when
OPERATION_TYPE is defined as "configureDatabase".

#-----------------------------------------------------------------------------

[CONFIGUREDATABASE]

#-----------------------------------------------------------------------------

# Name : SOURCEDB

# Datatype : String

# Description : The source database is the SID

# This database must be local and on the same
ORACLE_HOME.

# Default value : none

# Mandatory : YES

#-----------------------------------------------------------------------------

#SOURCEDB = "orcl"

#-----------------------------------------------------------------------------

# Name : SYSDBAUSERNAME

# Datatype : String

# Description : A user with DBA role.

# Default value : none

# Mandatory : YES, if no OS authentication

#-----------------------------------------------------------------------------

#SYSDBAUSERNAME = "sys"

#-----------------------------------------------------------------------------

# Name : SYSDBAPASSWORD

# Datatype : String

# Description : The password of the DBA user.

# You can also specify the password at the
command prompt instead of here.

# Default value : none

# Mandatory : YES, if no OS authentication

#-----------------------------------------------------------------------------

#SYSDBAPASSWORD =

#-----------------------------------------------------------------------------

# Name : REGISTERWITHDIRSERVICE

# Datatype : Boolean

# Description : Specifies whether to register with
Directory Service.

# Valid values : TRUE \ FALSE

# Default value : FALSE

# Mandatory : No

#-----------------------------------------------------------------------------

#REGISTERWITHDIRSERVICE= TRUE

#-----------------------------------------------------------------------------

# Name : UNREGISTERWITHDIRSERVICE

# Datatype : Boolean

# Description : Specifies whether to unregister with
Directory Service.

# Valid values : TRUE \ FALSE

# Default value : FALSE

# Mandatory : No

#-----------------------------------------------------------------------------

#UNREGISTERWITHDIRSERVICE= TRUE

#-----------------------------------------------------------------------------

# Name : REGENERATEDBPASSWORD

# Datatype : Boolean

# Description : Specifies whether regenerate database
password in OID/Wallet

# Valid values : TRUE \ FALSE

# Default value : FALSE

# Mandatory : No

#-----------------------------------------------------------------------------

#REGENERATEDBPASSWORD= TRUE

#-----------------------------------------------------------------------------

# Name : DIRSERVICEUSERNAME

# Datatype : String

# Description : Specifies the name of the directory
service user

# Mandatory : YES, if the any of the
reg/unreg/regenPasswd options specified

#-----------------------------------------------------------------------------

#DIRSERVICEUSERNAME= "name"

#-----------------------------------------------------------------------------

# Name : DIRSERVICEPASSWORD

# Datatype : String

# Description : The password of the directory service
user.

# You can also specify the password at the
command prompt instead of here.

# Mandatory : YES, if the any of the
reg/unreg/regenPasswd options specified

#-----------------------------------------------------------------------------

#DIRSERVICEPASSWORD= "password"

#-----------------------------------------------------------------------------

# Name : WALLETPASSWORD

# Datatype : String

# Description : The password for wallet to created or
modified.

# You can also specify the password at the
command prompt instead of here.

# Mandatory : YES, if the any of the reg/unreg/regenPasswd
options specified

#-----------------------------------------------------------------------------

#WALLETPASSWORD= "password"

#-----------------------------------------------------------------------------

# Name : DISABLESECURITYCONFIGURATION

# Datatype : String

# Description : Database Security Settings

# Valid values : ALL|NONE|AUDIT|PASSWORD_PROFILE

# Default value : NONE

# Mandatory : No

#-----------------------------------------------------------------------------

#DISABLESECURITYCONFIGURATION =
"NONE"

#-----------------------------------------------------------------------------

# Name : ENABLESECURITYCONFIGURATION

# Datatype : String

# Description : Database Security Settings

# Valid values : true|false

# Default value : true

# Mandatory : No

#-----------------------------------------------------------------------------

#ENABLESECURITYCONFIGURATION =
"true"

#-----------------------------------------------------------------------------

# Name : EMCONFIGURATION

# Datatype : String

# Description : Enterprise Manager Configuration Type

# Valid values : CENTRAL|LOCAL|ALL|NONE

# Default value : NONE

# Mandatory : No

#-----------------------------------------------------------------------------

#EMCONFIGURATION = "NONE"

#-----------------------------------------------------------------------------

# Name : SYSMANPASSWORD

# Datatype : String

# Description : Password for SYSMAN user

# Valid values : Check Oracle11g Administrator's Guide

# Default value : None

# Mandatory : Yes, if LOCAL specified for
EMCONFIGURATION

#-----------------------------------------------------------------------------

#SYSMANPASSWORD = "password"

#-----------------------------------------------------------------------------

# Name : DBSNMPPASSWORD

# Datatype : String

# Description : Password for DBSNMP user

# Valid values : Check Oracle11g Administrator's Guide

# Default value : None

# Mandatory : Yes, if EMCONFIGURATION is specified

#-----------------------------------------------------------------------------

#DBSNMPPASSWORD = "password"

#-----------------------------------------------------------------------------

# Name
: CENTRALAGENT

# Datatype : String

# Description : Grid Control Central Agent Oracle Home

# Default value : None

# Mandatory : Yes, if CENTRAL is specified for
EMCONFIGURATION

#-----------------------------------------------------------------------------

#CENTRALAGENT =

#-----------------------------------------------------------------------------

# Name : HOSTUSERNAME

# Datatype : String

# Description : Host user name for EM backup job

# Default value : None

# Mandatory : Yes, if ALL is specified for
EMCONFIGURATION

#-----------------------------------------------------------------------------

#HOSTUSERNAME =

#-----------------------------------------------------------------------------

# Name : HOSTUSERPASSWORD

# Datatype : String

# Description : Host user password for EM backup job

# Default value : None

# Mandatory : Yes, if ALL is specified for
EMCONFIGURATION

#-----------------------------------------------------------------------------

#HOSTUSERPASSWORD=

#-----------------------------------------------------------------------------

# Name : BACKUPSCHEDULE

# Datatype : String

# Description : Daily backup schedule in the form of hh:mm

# Default value : 2:00

# Mandatory :
Yes, if ALL is specified for EMCONFIGURATION

#-----------------------------------------------------------------------------

#BACKUPSCHEDULE=

#-----------------------*** End of
CONFIGUREDATABASE section ***------------------------

#-----------------------------------------------------------------------------

# ADDINSTANCE section is used when
OPERATION_TYPE is defined as "addInstance".

#-----------------------------------------------------------------------------

[ADDINSTANCE]

#-----------------------------------------------------------------------------

# Name : DB_UNIQUE_NAME

# Datatype : String

# Description : DB Unique Name of the RAC database

# Valid values : <db_unique_name>

# Default value : None

# Mandatory : Yes

#-----------------------------------------------------------------------------

DB_UNIQUE_NAME =
"orcl11g.us.oracle.com"

#-----------------------------------------------------------------------------

# Name : INSTANCENAME

# Datatype : String

# Description : RAC instance name to be added

# Valid values : Check Oracle11g Administrator's Guide

# Default value :
<sid_prefix>+<highest_current_thread+1>

# Mandatory : No

#-----------------------------------------------------------------------------

#INSTANCENAME = "orcl1"

#-----------------------------------------------------------------------------

# Name : NODELIST

# Datatype : String

# Description : Node on which to add new instance

# (in 10gR2, instance addition
is supported on 1 node at a time)

# Valid values : Cluster node name

# Default value : None

# Mandatory : Yes

#-----------------------------------------------------------------------------

NODELIST=

#-----------------------------------------------------------------------------

# Name : OBFUSCATEDPASSWORDS

# Datatype : Boolean

# Description : Set to true if passwords are encrypted

# Valid values : TRUE\FALSE

# Default value : FALSE

# Mandatory : No

#-----------------------------------------------------------------------------

#OBFUSCATEDPASSWORDS = FALSE

#-----------------------------------------------------------------------------

# Name : SYSDBAUSERNAME

# Datatype : String

# Description : A user with DBA role.

# Default value : none

# Mandatory : YES

#-----------------------------------------------------------------------------

SYSDBAUSERNAME = "sys"

#-----------------------------------------------------------------------------

# Name : SYSDBAPASSWORD

# Datatype : String

# Description : The password of the DBA user.

# Default value : none

# Mandatory : YES

#-----------------------------------------------------------------------------

#SYSDBAPASSWORD = "password"

#-----------------------*** End of
ADDINSTANCE section ***------------------------

#-----------------------------------------------------------------------------

# DELETEINSTANCE section is used when
OPERATION_TYPE is defined as "deleteInstance".

#-----------------------------------------------------------------------------

[DELETEINSTANCE]

#-----------------------------------------------------------------------------

# Name : DB_UNIQUE_NAME

# Datatype : String

# Description : DB Unique Name of the RAC database

# Valid values : <db_unique_name>

# Default value : None

# Mandatory : Yes

#-----------------------------------------------------------------------------

DB_UNIQUE_NAME =
"orcl11g.us.oracle.com"

#-----------------------------------------------------------------------------

# Name : INSTANCENAME

# Datatype : String

# Description : RAC instance name to be deleted

# Valid values : Check Oracle11g Administrator's Guide

# Default value : None

# Mandatory : Yes

#-----------------------------------------------------------------------------

INSTANCENAME = "orcl11g"

#-----------------------------------------------------------------------------

# Name : NODELIST

# Datatype : String

# Description : Node on which instance to be deleted (SID)
is located

# Valid values : Cluster node name

# Default value : None

# Mandatory : No

#-----------------------------------------------------------------------------

#NODELIST=

#-----------------------------------------------------------------------------

# Name : OBFUSCATEDPASSWORDS

# Datatype : Boolean

# Description : Set to true if passwords are encrypted

# Valid values : TRUE\FALSE

# Default value : FALSE

# Mandatory : No

#-----------------------------------------------------------------------------

#OBFUSCATEDPASSWORDS = FALSE

#-----------------------------------------------------------------------------

# Name : SYSDBAUSERNAME

# Datatype : String

# Description : A user with DBA role.

# Default value : none

# Mandatory : YES

#-----------------------------------------------------------------------------

SYSDBAUSERNAME = "sys"

#-----------------------------------------------------------------------------

# Name : SYSDBAPASSWORD

# Datatype : String

# Description : The password of the DBA user.

# Default value : none

# Mandatory : YES

#-----------------------------------------------------------------------------

#SYSDBAPASSWORD = "password"

#-----------------------*** End of
DELETEINSTANCE section ***------------------------

netca.rsp 样例

######################################################################

##
##

## Specify values for the variables listed
below to customize your ##

## installation. ##

##
##

## Each variable is associated with a
comment. The comment ##

## identifies the variable type. ##

##
##

## Please specify the values in the
following format: ##

##
##

##
Type Example ##

##
String       "Sample
Value"
##

##
Boolean True or False ##

##
Number 1000 ##

##
StringList   {"String value
1","String Value 2"}
##

##
##

######################################################################

##
##

## This sample response file causes the
Oracle Net Configuration ##

## Assistant (NetCA) to complete an Oracle
Net configuration during ##

## a custom install of the Oracle11g server
which is similar to ##

## what would be created by the NetCA
during typical Oracle11g ##

## install. It also documents all of the
NetCA response file ##

## variables so you can create your own
response file to configure ##

## Oracle Net during an install the way you
wish. ##

##
##

######################################################################

[GENERAL]

RESPONSEFILE_VERSION="11.2"

CREATE_TYPE="CUSTOM"

#-------------------------------------------------------------------------------

# Name
: SHOW_GUI

# Datatype
: Boolean

# Description: This variable controls
appearance/suppression of the NetCA GUI,

# Pre-req
: N/A

# Default
: TRUE

# Note:

# This must be set to false in order to run
NetCA in silent mode.

# This is a substitute of
"/silent" flag in the NetCA command line.

# The command line flag has precedence over
the one in this response file.

# This feature is present since 10.1.0.3.

#-------------------------------------------------------------------------------

#SHOW_GUI=false

#-------------------------------------------------------------------------------

# Name
: LOG_FILE

# Datatype
: String

# Description: If present, NetCA will log
output to this file in addition to the

# standard out.

# Pre-req
: N/A

# Default
: NONE

# Note:

# This
is a substitute of "/log" in the NetCA command line.

# The command line argument has precedence
over the one in this response file.

# This feature is present since 10.1.0.3.

#-------------------------------------------------------------------------------

#LOG_FILE=""/oracle11gHome/network/tools/log/netca.log""

[oracle.net.ca]

#INSTALLED_COMPONENTS;StringList;list of
installed components

# The possible values for installed components
are:

#
"net8","server","client","aso",
"cman", "javavm"

INSTALLED_COMPONENTS={"server","net8","javavm"}

#INSTALL_TYPE;String;type of install

# The possible values for install type are:

# "typical","minimal"
or "custom"

INSTALL_TYPE=""custom""

#LISTENER_NUMBER;Number;Number of Listeners

# A typical install sets one listener

LISTENER_NUMBER=1

#LISTENER_NAMES;StringList;list of listener
names

# The values for listener are:

#
"LISTENER","LISTENER1","LISTENER2","LISTENER3",
...

# A typical install sets only
"LISTENER"

LISTENER_NAMES={"LISTENER"}

#LISTENER_PROTOCOLS;StringList;list of
listener addresses (protocols and parameters separated by semicolons)

# The possible values for listener
protocols are:

#
"TCP;1521","TCPS;2484","NMP;ORAPIPE","IPC;IPCKEY","VI;1521"

# A typical install sets only
"TCP;1521"

LISTENER_PROTOCOLS={"TCP;1521"}

#LISTENER_START;String;name of the listener
to start, in double quotes

LISTENER_START=""LISTENER""

#NAMING_METHODS;StringList;list of naming
methods

# The possible values for naming methods
are:

# LDAP, TNSNAMES, ONAMES, HOSTNAME, NOVELL,
NIS, DCE

# A typical install sets only:
"TNSNAMES","ONAMES","HOSTNAMES"

# or
"LDAP","TNSNAMES","ONAMES","HOSTNAMES"
for LDAP

NAMING_METHODS={"TNSNAMES","ONAMES","HOSTNAME"}

#NOVELL_NAMECONTEXT;String;Novell Directory
Service name context, in double quotes

# A typical install does not use this
variable.

#NOVELL_NAMECONTEXT =
""NAMCONTEXT""

#SUN_METAMAP;String; SUN meta map, in
double quotes

# A typical install does not use this
variable.

#SUN_METAMAP = ""MAP""

#DCE_CELLNAME;String;DCE cell name, in
double quotes

# A typical install does not use this
variable.

#DCE_CELLNAME =
""CELL""

#NSN_NUMBER;Number;Number of NetService
Names

# A typical install sets one net service
name

NSN_NUMBER=1

#NSN_NAMES;StringList;list of Net Service
names

# A typical install sets net service name
to "EXTPROC_CONNECTION_DATA"

NSN_NAMES={"EXTPROC_CONNECTION_DATA"}

#NSN_SERVICE;StringList;Oracle11g
database's service name

# A typical install sets Oracle11g
database's service name to "PLSExtProc"

NSN_SERVICE={"PLSExtProc"}

#NSN_PROTOCOLS;StringList;list of coma
separated strings of Net Service Name protocol parameters

# The possible values for net service name
protocol parameters are:

#
"TCP;HOSTNAME;1521","TCPS;HOSTNAME;2484","NMP;COMPUTERNAME;ORAPIPE","VI;HOSTNAME;1521","IPC;IPCKEY"

# A typical install sets parameters to
"IPC;EXTPROC"

NSN_PROTOCOLS={"TCP;HOSTNAME;1521"}

码农公寓

附录

相关文章