Keepalived+MySQL实现高可用

2023-07-30 11:31:28

MySQL的高可用方案有很多，比如Cluster，MMM，MHA，DRBD等，这些都比较复杂，我前面的文章也有介绍。最近Oracle官方也推出了Fabric。有时我们不需要这么复杂的环境，这些方案各有优劣。有时简单的且我们能够hold住的方案才是适合我们的。比如MySQL Replication，然后加上各种高可用软件，比如Keepalived等，就能实现我们需要的高可用环境。

MySQL架构为master/slave，当master故障时，vip漂移到slave上。提供服务。当然也可以设置为双master，但是不是每个方案都是完美的。这里设置为双master有个问题需要注意，比如，当用户发表文章时，由于此时主机的压力很大时，假设落后2000秒，那么这台主机宕机了，另一台主机接管（vip漂移到从机上）时，因为同步延时大，用户刚才发表的文章还没复制过来，于是用户又发表了一遍文章，当原来的master修复好后，由于I/O和SQL线程还处于开启状态，因此还会继续同步刚才没有同步复制完的数据，这时有可能把用户新发表的文章更改掉。这里所以采用master/slave架构。在这种架构中，故障切换以后，采取手动操作的方式与新的master进行复制。

简单环境如下：

master     192.168.0.100

slave      192.168.0.101

VIP        192.168.0.88

主从复制环境的搭建我这里就不演示了。有需要的同学自己看看官方手册。下面直接介绍keepalived的安装及配置使用。

1.keepalived软件安装（主从操作一样）

[root@mysql-server- ~]# wget -q http://www.keepalived.org/software/keepalived-1.2.13.tar.gz

[root@mysql-server- ~]# tar xf keepalived-1.2..tar.gz

[root@mysql-server- ~]# cd keepalived-1.2.

[root@mysql-server- keepalived-1.2.]# ./configure && make && make install

[root@mysql-server- keepalived]# cp /usr/local/etc/rc.d/init.d/keepalived /etc/rc.d/init.d/

[root@mysql-server- keepalived]# cp /usr/local/etc/sysconfig/keepalived /etc/sysconfig/

[root@mysql-server- keepalived]# mkdir /etc/keepalived

[root@mysql-server- keepalived]# cp /usr/local/etc/keepalived/keepalived.conf /etc/keepalived/

[root@mysql-server- keepalived]# cp /usr/local/sbin/keepalived /usr/sbin/

[root@mysql-server- keepalived]# chkconfig --add keepalived

[root@mysql-server- keepalived]# chkconfig --level  keepalived on

2.主从的配置文件修改（主的keepalived配置文件修改后如下，其实不相同的就优先级而已）
master的keepalived配置文件如下

[root@mysql-server- keepalived]# cat keepalived.conf

global_defs {

   router_id MySQL-HA

} 

vrrp_script check_run {

script "/data/sh/mysql_check.sh"

interval

}

vrrp_sync_group VG1 {

group {

VI_1

}

}

vrrp_instance VI_1 {

    state BACKUP

    interface eth1

    virtual_router_id

    priority

    advert_int

    nopreempt

    authentication {

        auth_type PASS

        auth_pass

    }

    track_script {

    check_run

    }

    notify_master /data/sh/master.sh

    notify_backup /data/sh/backup.sh

    notify_stop /data/sh/stop.sh

    virtual_ipaddress {

        192.168.0.88

    }

}

[root@mysql-server- keepalived]#

slave的keepalived配置文件修改以后如下：

[root@mysql-server- keepalived]# cat keepalived.conf

global_defs {

   router_id MySQL-HA

} 

vrrp_script check_run {

script "/data/sh/mysql_check.sh"

interval

}

vrrp_sync_group VG1 {

group {

VI_1

}

}

vrrp_instance VI_1 {

    state BACKUP

    interface eth1

    virtual_router_id

    priority

    advert_int

    authentication {

        auth_type PASS

        auth_pass

    }

    track_script {

    check_run

    }

    notify_master /data/sh/master.sh

    notify_backup /data/sh/backup.sh

    notify_stop /data/sh/stop.sh

    virtual_ipaddress {

        192.168.0.88

    }

}

[root@mysql-server- keepalived]#

其中有几个关键参数的地方：
notify_master：状态改变为master以后执行的脚本。

notify_backup: 状态改变为backup以后执行的脚本。

notify_fault: 状态改变为fault后执行的脚本。

notify_stop: VRRP停止以后执行的脚本。

state backup：我们都设置为了backup，就是为了发生故障以后不会自动切换。

nopreempt：不进行抢占操作

其中用到了这4个脚本：backup.sh master.sh mysql_check.sh stop.sh

mysql_check.sh是为了检查mysqld进程是否存活的脚本，当发现连接不上mysql，自动把keepalived进程干掉，让VIP进行漂移。

下面的脚本主从服务器上面都有，只是从服务器上面的master.sh有些不一样。添加了当slave提升为主库时，发送邮件通知。

[root@mysql-server- sh]# cat mysql_check.sh

#!/bin/bash

. /root/.bash_profile

count=

while true

do

mysql -uroot -pmsandbox -S /tmp/mysql_sandbox14520.sock -e "show status;" > /dev/null >&

i=$?

ps aux | grep mysqld | grep -v grep > /dev/null >&

j=$?

if [ $i =  ] && [ $j =  ]

then

   exit

else

   if [ $i =  ] && [ $j =  ]

   then

       exit

   else

        if [ $count -gt  ]

        then

              break

        fi

   let count++

   continue

   fi

fi

done

/etc/init.d/keepalived stop

[root@mysql-server- sh]#

master.sh的作用是状态改为master以后执行的脚本。首先判断复制是否有延迟，如果有延迟，等1分钟后，不论是否有延迟。都跳过，并停止复制。并且授权账号，记录binlog和pos点。

[root@mysql-server- sh]# cat master.sh

#!/bin/bash

. /root/.bash_profile

Master_Log_File=$(mysql -uroot -pmsandbox -S /tmp/mysql_sandbox14521.sock -e "show slave status\G" | grep -w Master_Log_File | awk -F": " '{print $2}')

Relay_Master_Log_File=$(mysql -uroot -pmsandbox -S /tmp/mysql_sandbox14521.sock -e "show slave status\G" | grep -w Relay_Master_Log_File | awk -F": " '{print $2}')

Read_Master_Log_Pos=$(mysql -uroot -pmsandbox -S /tmp/mysql_sandbox14521.sock -e "show slave status\G" | grep -w Read_Master_Log_Pos | awk -F": " '{print $2}')

Exec_Master_Log_Pos=$(mysql -uroot -pmsandbox -S /tmp/mysql_sandbox14521.sock -e "show slave status\G" | grep -w Exec_Master_Log_Pos | awk -F": " '{print $2}')

i=

while true

do

if [ $Master_Log_File = $Relay_Master_Log_File ] && [ $Read_Master_Log_Pos -eq $Exec_Master_Log_Pos ]

then

   echo "ok"

   break

else

   sleep 

   if [ $i -gt  ]

   then

      break

   fi

   continue

   let i++

fi

done

mysql -uroot -pmsandbox -S /tmp/mysql_sandbox14521.sock -e "stop slave;"

mysql -uroot -pmsandbox -S /tmp/mysql_sandbox14521.sock -e "set global innodb_support_xa=0;"

mysql -uroot -pmsandbox -S /tmp/mysql_sandbox14521.sock -e "set global sync_binlog=0;"

mysql -uroot -pmsandbox -S /tmp/mysql_sandbox14521.sock -e "set global innodb_flush_log_at_trx_commit=0;"

mysql -uroot -pmsandbox -S /tmp/mysql_sandbox14521.sock -e "flush logs;GRANT ALL PRIVILEGES ON *.* TO 'admin'@'%' IDENTIFIED BY '123456';flush privileges;"

mysql -uroot -pmsandbox -S /tmp/mysql_sandbox14521.sock -e "show master status;" > /tmp/master_status_$(date "+%y%m%d-%H%M").txt

[root@mysql-server- sh]#

slave上的master.sh

[root@mysql-server- sh]# cat master.sh

#!/bin/bash

. /root/.bash_profile

Master_Log_File=$(mysql -uroot -pmsandbox -S /tmp/mysql_sandbox14521.sock -e "show slave status\G" | grep -w Master_Log_File | awk -F": " '{print $2}')

Relay_Master_Log_File=$(mysql -uroot -pmsandbox -S /tmp/mysql_sandbox14521.sock -e "show slave status\G" | grep -w Relay_Master_Log_File | awk -F": " '{print $2}')

Read_Master_Log_Pos=$(mysql -uroot -pmsandbox -S /tmp/mysql_sandbox14521.sock -e "show slave status\G" | grep -w Read_Master_Log_Pos | awk -F": " '{print $2}')

Exec_Master_Log_Pos=$(mysql -uroot -pmsandbox -S /tmp/mysql_sandbox14521.sock -e "show slave status\G" | grep -w Exec_Master_Log_Pos | awk -F": " '{print $2}')

i=

while true

do

if [ $Master_Log_File = $Relay_Master_Log_File ] && [ $Read_Master_Log_Pos -eq $Exec_Master_Log_Pos ]

then

   echo "ok"

   break

else

   sleep 

   if [ $i -gt  ]

   then

      break

   fi

   continue

   let i++

fi

done

mysql -uroot -pmsandbox -S /tmp/mysql_sandbox14521.sock -e "stop slave;"

mysql -uroot -pmsandbox -S /tmp/mysql_sandbox14521.sock -e "set global innodb_support_xa=0;"

mysql -uroot -pmsandbox -S /tmp/mysql_sandbox14521.sock -e "set global sync_binlog=0;"

mysql -uroot -pmsandbox -S /tmp/mysql_sandbox14521.sock -e "set global innodb_flush_log_at_trx_commit=0;"

mysql -uroot -pmsandbox -S /tmp/mysql_sandbox14521.sock -e "flush logs;GRANT ALL PRIVILEGES ON *.* TO 'admin'@'%' IDENTIFIED BY '123456';flush privileges;"

mysql -uroot -pmsandbox -S /tmp/mysql_sandbox14521.sock -e "show master status;" > /tmp/master_status_$(date "+%y%m%d-%H%M").txt

#当slave提升为主以后，发送邮件

echo "#####################################" > /tmp/status

echo "salve已经提升为主库，请进行检查！" >> /tmp/status

ifconfig | sed -n '/inet /{s/.*addr://;s/ .*//;p}' | grep -v 127.0.0.1 >> /tmp/status

mysql -uroot -pmsandbox -S /tmp/mysql_sandbox14521.sock -Nse "show variables like 'port'" >> /tmp/status

echo "#####################################" >> /tmp/status

master=`cat /tmp/status`

echo "$master" | mutt -s "slave to primary!!!" @.com

脚本中检查复制是否延时的思想如下：
1、首先看 Relay_Master_Log_File 和 Master_Log_File 是否有差异
2、如果Relay_Master_Log_File 和 Master_Log_File 有差异的话，那说明延迟很大了
3、如果Relay_Master_Log_File 和 Master_Log_File 没有差异，再来看Exec_Master_Log_Pos 和 Read_Master_Log_Pos 的差异

而不是通过Seconds_Behind_Master去判断，该值表示slave上SQL线程和IO线程之间的延迟，实际上还要考虑到 Master_Log_File 和 Relay_Master_Log_File 是否有差距，更严谨的则是要同时在master上执行show master status进行对比。这也是MHA在切换过程中可以做到的。MMM的切换也只是在从库上执行了show slave status。所以数据一致性要求还是MHA给力。扯远了。^_^

backup.sh脚本的作用是状态改变为backup以后执行的脚本。

[root@mysql-server- sh]# cat backup.sh

#!/bin/bash

. /root/.bash_profile

mysql -uroot -pmsandbox -S /tmp/mysql_sandbox14521.sock -e "GRANT ALL PRIVILEGES ON *.* TO 'admin'@'%' IDENTIFIED BY '123456';flush privileges;"

mysql -uroot -pmsandbox -S /tmp/mysql_sandbox14521.sock -e "set global event_scheduler=0;"

mysql -uroot -pmsandbox -S /tmp/mysql_sandbox14521.sock -e "set global innodb_support_xa=0;"

mysql -uroot -pmsandbox -S /tmp/mysql_sandbox14521.sock -e "set global sync_binlog=0;"

mysql -uroot -pmsandbox -S /tmp/mysql_sandbox14521.sock -e "set global innodb_flush_log_at_trx_commit=0;"

stop.sh 表示keepalived停止以后需要执行的脚本。更改密码，设置参数，检查是否还有写入操作，最后无论是否执行完毕，都退出。

[root@mysql-server- sh]# cat stop.sh

#!/bin/bash

. /root/.bash_profile

mysql -uroot -pmsandbox -S /tmp/mysql_sandbox14521.sock -e "GRANT ALL PRIVILEGES ON *.* TO 'admin'@'%' IDENTIFIED BY '1q2w3e4r';flush privileges;"

mysql -uroot -pmsandbox -S /tmp/mysql_sandbox14521.sock -e "set global innodb_support_xa=1;"

mysql -uroot -pmsandbox -S /tmp/mysql_sandbox14521.sock -e "set global sync_binlog=1;"

mysql -uroot -pmsandbox -S /tmp/mysql_sandbox14521.sock -e "set global innodb_flush_log_at_trx_commit=1;"

M_File1=$(mysql -uroot -pmsandbox -S /tmp/mysql_sandbox14521.sock -e "show master status\G" | awk -F': ' '/File/{print $2}')

M_Position1=$(mysql -uroot -pmsandbox -S /tmp/mysql_sandbox14521.sock -e "show master status\G" | awk -F': ' '/Position/{print $2}')

sleep

M_File2=$(mysql -uroot -pmsandbox -S /tmp/mysql_sandbox14521.sock -e "show master status\G" | awk -F': ' '/File/{print $2}')

M_Position2=$(mysql -uroot -pmsandbox -S /tmp/mysql_sandbox14521.sock -e "show master status\G" | awk -F': ' '/Position/{print $2}')

i=

while true

do

if [ $M_File1 = $M_File1 ] && [ $M_Position1 -eq $M_Position2 ]

then

   echo "ok"

   break

else

   sleep 

   if [ $i -gt  ]

   then

      break

   fi

   continue

   let i++

fi

done

[root@mysql-server- sh]#

到这里基本就介绍完了。最后我们先看主从复制是否正常，如果正常，然后分别启动keepalived，然后进行故障切换测试。

slave状态：

node2 [localhost] {msandbox} ((none)) > pager cat | egrep 'Master_Log_File|Relay_Master_Log_File|Read_Master_Log_Pos|Exec_Master_Log_Pos|Running'

PAGER set to 'cat | egrep 'Master_Log_File|Relay_Master_Log_File|Read_Master_Log_Pos|Exec_Master_Log_Pos|Running''

node2 [localhost] {msandbox} ((none)) > show slave status\G

              Master_Log_File: mysql-bin.000001

          Read_Master_Log_Pos: 409

        Relay_Master_Log_File: mysql-bin.000001

             Slave_IO_Running: Yes

            Slave_SQL_Running: Yes

          Exec_Master_Log_Pos: 409

      Slave_SQL_Running_State: Slave has read all relay log; waiting for the slave I/O thread to update it

1 row in set (0.00 sec)

node2 [localhost] {msandbox} ((none)) >

master 状态：

node1 [localhost] {msandbox} ((none)) > show master status;

+------------------+----------+--------------+------------------+-------------------+

| File             | Position | Binlog_Do_DB | Binlog_Ignore_DB | Executed_Gtid_Set |

+------------------+----------+--------------+------------------+-------------------+

| mysql-bin.000001 |      409 |              |                  |                   |

+------------------+----------+--------------+------------------+-------------------+

1 row in set (0.00 sec)

node1 [localhost] {msandbox} ((none)) >

根据我前面给的判断条件，可以看出我的复制没有任何延时。
下面分别在master上和slave上启动keepalived进程。以及查看日志（上面的查看只是给大家说明如何判断复制是否延迟）

master

[root@mysql-server- sh]# /etc/init.d/keepalived start

Starting keepalived:                                       [  OK  ]

[root@mysql-server- sh]# tail -f /var/log/messages

Jul  :: mysql-server- Keepalived_vrrp[]: Netlink reflector reports IP 192.168.87.134 added

Jul  :: mysql-server- Keepalived_vrrp[]: Netlink reflector reports IP 192.168.0.100 added

Jul  :: mysql-server- Keepalived_vrrp[]: Registering Kernel netlink reflector

Jul  :: mysql-server- Keepalived_vrrp[]: Registering Kernel netlink command channel

Jul  :: mysql-server- Keepalived_vrrp[]: Registering gratuitous ARP shared channel

Jul  :: mysql-server- Keepalived_healthcheckers[]: Netlink reflector reports IP 192.168.0.100 added

Jul  :: mysql-server- Keepalived_healthcheckers[]: Netlink reflector reports IP 192.168.87.134 added

Jul  :: mysql-server- Keepalived_healthcheckers[]: Netlink reflector reports IP 192.168.0.100 added

Jul  :: mysql-server- Keepalived_healthcheckers[]: Registering Kernel netlink reflector

Jul  :: mysql-server- Keepalived_healthcheckers[]: Registering Kernel netlink command channel

Jul  :: mysql-server- Keepalived_healthcheckers[]: Opening file '/etc/keepalived/keepalived.conf'.

Jul  :: mysql-server- Keepalived_healthcheckers[]: Configuration is using :  Bytes

Jul  :: mysql-server- Keepalived_vrrp[]: Opening file '/etc/keepalived/keepalived.conf'.

Jul  :: mysql-server- Keepalived_vrrp[]: Configuration is using :  Bytes

Jul  :: mysql-server- Keepalived_vrrp[]: Using LinkWatch kernel netlink reflector...

Jul  :: mysql-server- Keepalived_healthcheckers[]: Using LinkWatch kernel netlink reflector...

Jul  :: mysql-server- Keepalived_vrrp[]: VRRP_Instance(VI_1) Entering BACKUP STATE

Jul  :: mysql-server- Keepalived_vrrp[]: VRRP sockpool: [ifindex(), proto(), unicast(), fd(,)]

Jul  :: mysql-server- Keepalived_vrrp[]: VRRP_Script(check_run) succeeded

Jul  :: mysql-server- Keepalived_vrrp[]: VRRP_Instance(VI_1) Transition to MASTER STATE

Jul  :: mysql-server- Keepalived_vrrp[]: VRRP_Group(VG1) Syncing instances to MASTER state

Jul  :: mysql-server- Keepalived_vrrp[]: VRRP_Instance(VI_1) Entering MASTER STATE

Jul  :: mysql-server- Keepalived_vrrp[]: VRRP_Instance(VI_1) setting protocol VIPs.

Jul  :: mysql-server- Keepalived_vrrp[]: VRRP_Instance(VI_1) Sending gratuitous ARPs on eth1 for 192.168.0.88

Jul  :: mysql-server- Keepalived_healthcheckers[]: Netlink reflector reports IP 192.168.0.88 added

Jul  :: mysql-server- Keepalived_vrrp[]: VRRP_Instance(VI_1) Sending gratuitous ARPs on eth1 for 192.168.0.88

slave

[root@mysql-server- tmp]# /etc/init.d/keepalived start

Starting keepalived:                                       [  OK  ]

[root@mysql-server- tmp]# tail -f /var/log/messages

Jul  :: mysql-server- Keepalived_vrrp[]: Netlink reflector reports IP fe80::20c:29ff:fefe:dc91 added

Jul  :: mysql-server- Keepalived_healthcheckers[]: Netlink reflector reports IP 192.168.0.101 added

Jul  :: mysql-server- Keepalived_healthcheckers[]: Netlink reflector reports IP fe80::20c:29ff:fefe:dc91 added

Jul  :: mysql-server- Keepalived_vrrp[]: Netlink reflector reports IP fe80::20c:29ff:fefe:dc9b added

Jul  :: mysql-server- Keepalived_vrrp[]: Registering Kernel netlink reflector

Jul  :: mysql-server- Keepalived_healthcheckers[]: Netlink reflector reports IP fe80::20c:29ff:fefe:dc9b added

Jul  :: mysql-server- Keepalived_healthcheckers[]: Registering Kernel netlink reflector

Jul  :: mysql-server- Keepalived_vrrp[]: Registering Kernel netlink command channel

Jul  :: mysql-server- Keepalived_healthcheckers[]: Registering Kernel netlink command channel

Jul  :: mysql-server- Keepalived_vrrp[]: Registering gratuitous ARP shared channel

Jul  :: mysql-server- Keepalived_healthcheckers[]: Opening file '/etc/keepalived/keepalived.conf'.

Jul  :: mysql-server- Keepalived_healthcheckers[]: Configuration is using :  Bytes

Jul  :: mysql-server- Keepalived_vrrp[]: Opening file '/etc/keepalived/keepalived.conf'.

Jul  :: mysql-server- Keepalived_vrrp[]: Configuration is using :  Bytes

Jul  :: mysql-server- Keepalived_vrrp[]: Using LinkWatch kernel netlink reflector...

Jul  :: mysql-server- Keepalived_healthcheckers[]: Using LinkWatch kernel netlink reflector...

Jul  :: mysql-server- Keepalived_vrrp[]: VRRP_Instance(VI_1) Entering BACKUP STATE

Jul  :: mysql-server- Keepalived_vrrp[]: VRRP sockpool: [ifindex(), proto(), unicast(), fd(,)]

Jul  :: mysql-server- Keepalived_vrrp[]: VRRP_Script(check_run) succeeded

可以看见VIP已经绑定在了master上，执行ip addr看看是否有这个VIP

[root@mysql-server- ~]# ip addr | grep eth1

: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu  qdisc pfifo_fast state UP qlen

    inet 192.168.0.100/ brd 192.168.0.255 scope global eth1

    inet 192.168.0.88/ scope global eth1

[root@mysql-server- ~]#

可以看见vip也已经绑定成功。

现在我们从远程机器登陆看看，使用vip，创建测试库，插入数据，最后模拟mysqld crash

[root@mysql-server-03 ~]# mysql -uadmin -p123456 -h 192.168.0.88 -P 14520

Warning: Using a password on the command line interface can be insecure.

Welcome to the MySQL monitor.  Commands end with ; or \g.

Your MySQL connection id is 47

Server version: 5.6.19-log MySQL Community Server (GPL)

Copyright (c) 2000, 2014, Oracle and/or its affiliates. All rights reserved.

Oracle is a registered trademark of Oracle Corporation and/or its

affiliates. Other names may be trademarks of their respective

owners.

Type 'help;' or '\h' for help. Type '\c' to clear the current input statement.

mysql> create database dengyayun;

Query OK, 1 row affected (0.01 sec)

mysql> use dengyayun

Database changed

mysql> create table t1 ( id int);

Query OK, 0 rows affected (0.38 sec)

mysql> insert into t1 select 999;

Query OK, 1 row affected (0.03 sec)

Records: 1  Duplicates: 0  Warnings: 0

mysql>

发现使用vip登陆没有问题，创建库以及插入数据都木有问题。现在杀掉mysqld进程，看vip是否进行了漂移，以及查看数据是否存在。

[root@mysql-server- ~]# pkill - mysqld

过了一会儿，报警邮件就到了，以及vip也已经切换了。如下：

查看slave上面的message信息，如下输出：

[root@mysql-server- ~]# tail -n  /var/log/messages

Jul  :: mysql-server- Keepalived_healthcheckers[]: Registering Kernel netlink command channel

Jul  :: mysql-server- Keepalived_vrrp[]: Opening file '/etc/keepalived/keepalived.conf'.

Jul  :: mysql-server- Keepalived_vrrp[]: Configuration is using :  Bytes

Jul  :: mysql-server- Keepalived_vrrp[]: Using LinkWatch kernel netlink reflector...

Jul  :: mysql-server- Keepalived_healthcheckers[]: Opening file '/etc/keepalived/keepalived.conf'.

Jul  :: mysql-server- Keepalived_healthcheckers[]: Configuration is using :  Bytes

Jul  :: mysql-server- Keepalived_healthcheckers[]: Using LinkWatch kernel netlink reflector...

Jul  :: mysql-server- Keepalived_vrrp[]: VRRP_Instance(VI_1) Entering BACKUP STATE

Jul  :: mysql-server- Keepalived_vrrp[]: VRRP sockpool: [ifindex(), proto(), unicast(), fd(,)]

Jul  :: mysql-server- Keepalived_vrrp[]: VRRP_Script(check_run) succeeded

Jul  :: mysql-server- dhclient[]: DHCPREQUEST on eth0 to 192.168.87.254 port  (xid=0x4ada08db)

Jul  :: mysql-server- dhclient[]: DHCPACK from 192.168.87.254 (xid=0x4ada08db)

Jul  :: mysql-server- dhclient[]: bound to 192.168.87.135 -- renewal in  seconds.

Jul  :: mysql-server- Keepalived_vrrp[]: VRRP_Instance(VI_1) Transition to MASTER STATE

Jul  :: mysql-server- Keepalived_vrrp[]: VRRP_Group(VG1) Syncing instances to MASTER state

Jul  :: mysql-server- Keepalived_vrrp[]: VRRP_Instance(VI_1) Entering MASTER STATE

Jul  :: mysql-server- Keepalived_vrrp[]: VRRP_Instance(VI_1) setting protocol VIPs.

Jul  :: mysql-server- Keepalived_vrrp[]: VRRP_Instance(VI_1) Sending gratuitous ARPs on eth1 for 192.168.0.88

Jul  :: mysql-server- Keepalived_healthcheckers[]: Netlink reflector reports IP 192.168.0.88 added

Jul  :: mysql-server- Keepalived_vrrp[]: VRRP_Instance(VI_1) Sending gratuitous ARPs on eth1 for 192.168.0.88

[root@mysql-server- ~]#

最后我们再次使用vip登陆；发现数据没有异常。复制也停止了，因为已经切换为主库。

[root@mysql-server-03 ~]# mysql -uadmin -p123456 -h 192.168.0.88 -P14521

Warning: Using a password on the command line interface can be insecure.

Welcome to the MySQL monitor.  Commands end with ; or \g.

Your MySQL connection id is 301

Server version: 5.6.19-log MySQL Community Server (GPL)

Copyright (c) 2000, 2014, Oracle and/or its affiliates. All rights reserved.

Oracle is a registered trademark of Oracle Corporation and/or its

affiliates. Other names may be trademarks of their respective

owners.

Type 'help;' or '\h' for help. Type '\c' to clear the current input statement.

mysql> select * from dengyayun.t1;

+------+

| id   |

+------+

|  999 |

+------+

1 row in set (0.00 sec)

mysql> pager cat | egrep 'IO_Running|SQL_Running'

PAGER set to 'cat | egrep 'IO_Running|SQL_Running''

mysql> show slave status\G

             Slave_IO_Running: No

            Slave_SQL_Running: No

      Slave_SQL_Running_State:

1 row in set (0.00 sec)

mysql>

码农公寓

相关文章