[Kinect]XBox One Kinect连接Windows

注:本文全原创,作者:Noah Zhang  (http://www.cnblogs.com/noahzn/)

XBox One带体感套装去年就买了,昨天京东349元入了个适配器,下午就送到了,开箱。

[Kinect]XBox One Kinect连接Windows

[Kinect]XBox One Kinect连接Windows

按照说明书把Kinect通过适配器连接电脑,我是Win10操作系统。

[Kinect]XBox One Kinect连接Windows

官方给出的硬件要求如下:

Your computer must have the following minimum capabilities:

  • 64 bit (x64) processor
  • 4 GB Memory (or more)
  • I7 3.1 GHz (or higher)
  • Built-in USB 3.0 host controller (Intel or Renesas chipset).   (电脑要有USB3.0接口)

    If you're adding USB 3.0 functionality to your existing PC through an adapter, please ensure that it is a Windows 8 compliant device and that it supports Gen-2. See the troubleshooting section of Getting Started for more information.

  • DX11 capable graphics adapter (see list of known good adapters below)   (支持DX11的显卡,我用的是HD5770)
    • Intel HD 4400 integrated display adapter
    • ATI Radeon HD 5400 series
    • ATI Radeon HD 6570
    • ATI Radeon HD 7800 (256-bit GDDR5 2GB/1000Mhz)
    • NVidia Quadro 600
    • NVidia GeForce GT 640
    • NVidia GeForce GTX 660
    • NVidia Quadro K1000M
  • A Kinect v2 sensor, which includes a power hub and USB cabling.

连接之后,会自动安装驱动程序,装完之后,下载Kinect for Windows SDK2.0并安装

(链接: http://pan.baidu.com/s/1ca7zwM 密码: 7n5u)

安装完毕后,打开Kinect Studio,记得先连接设备哦~

[Kinect]XBox One Kinect连接Windows

然后就可以看到Kinect采集的画面了。

[Kinect]XBox One Kinect连接Windows

也可以打开SDK Browser,看看深度图像。

[Kinect]XBox One Kinect连接Windows

上一篇:requirejs的用法(二)


下一篇:【转】在Express项目中使用Handlebars模板引擎