Hooray! Now you know you can expand points to get more details. Alternatively, there's a "toggle all" at the top of this document.

Decision: When you fail to specify
var, the variable gets placed in the global context, potentially clobbering existing values. Also, if there's no declaration, it's hard to tell in what scope a variable lives (e.g., it could be in the Document or Window just as easily as in the local
scope). So always declare with var.

Decision:

Constant values

If a value is intended to be constant and immutable, it should be given a name inCONSTANT_VALUE_CASE.ALL_CAPS additionally implies
@const (that the value is not overwritable).

Primitive types (number, string, boolean) are constant values.

Objects' immutability is more subjective — objects should be considered immutable only if they do not demonstrate observable state change. This is not enforced by the compiler.

Constant pointers (variables and properties)

The @const annotation on a variable or property implies that it is not overwritable. This is enforced by the compiler at build time. This behavior is consistent with theconst
keyword (which we do not use due to the lack of support in Internet Explorer).

A @const annotation on a method additionally implies that the method cannot not be overridden in subclasses.

A @const annotation on a constructor implies the class cannot be subclassed (akin tofinal in Java).

Examples

Note that @const does not necessarily imply CONSTANT_VALUES_CASE. However,CONSTANT_VALUES_CASEdoes imply
@const.

/**

 * Request timeout in milliseconds.

 * @type {number}

 */

goog.example.TIMEOUT_IN_MILLISECONDS = 60;

The number of seconds in a minute never changes. It is a constant value.
ALL_CAPS also implies @const, so the constant cannot be overwritten.

The open source compiler will allow the symbol to be overwritten because the constant isnot marked as@const.

/**

 * Map of URL to response string.

 * @const

 */

MyClass.fetchedUrlCache_ = new goog.structs.Map();

/**

 * Class that cannot be subclassed.

 * @const

 * @constructor

 */

sloth.MyFinalClass = function() {};

In this case, the pointer can never be overwritten, but value is highly mutable and not constant (and thus incamelCase, notALL_CAPS).

Relying on implicit insertion can cause subtle, hard to debug problems. Don't do it. You're better than that.

There are a couple places where missing semicolons are particularly dangerous:

// 1.

MyClass.prototype.myMethod = function() {

  return 42;

}  // No semicolon here.

(function() {

  // Some initialization code wrapped in a function to create a scope for locals.

})();

var x = {

  'i': 1,

  'j': 2

}  // No semicolon here.

// 2.  Trying to do one thing on Internet Explorer and another on Firefox.

// I know you'd never write code like this, but throw me a bone.

[ffVersion, ieVersion][isIE]();

var THINGS_TO_EAT = [apples, oysters, sprayOnCheese]  // No semicolon here.

// 3. conditional execution a la bash

-1 == resultOfOperation() || die();

So what happens?

1. JavaScript error - first the function returning 42 is called with the second function as a parameter, then the number 42 is "called" resulting in an error.
2. You will most likely get a 'no such property in undefined' error at runtime as it tries to callx[ffVersion, ieVersion][isIE]().
3. die is always called since the array minus 1 is NaN which is never equal to anything (not even ifresultOfOperation() returnsNaN) and
   THINGS_TO_EAT gets assigned the result ofdie().

Why?

JavaScript requires statements to end with a semicolon, except when it thinks it can safely infer their existence. In each of these examples, a function declaration or object or array literal is used inside a statement. The closing brackets are not enough
to signal the end of the statement. Javascript never ends a statement if the next token is an infix or bracket operator.

This has really surprised people, so make sure your assignments end with semicolons.

Clarification: Semicolons and functions

Semicolons should be included at the end of function expressions, but not at the end of function declarations. The distinction is best illustrated with an example:

var foo = function() {

  return true;

};  // semicolon here.

function foo() {

  return true;

}  // no semicolon here.

Nested functions can be very useful, for example in the creation of continuations and for the task of hiding helper functions. Feel free to use them.

Do not do this:

if (x) {

  function foo() {}

}

While most script engines support Function Declarations within blocks it is not part of ECMAScript (seeECMA-262, clause 13 and 14). Worse
implementations are inconsistent with each other and with future EcmaScript proposals. ECMAScript only allows for Function Declarations in the root statement list of a script or function. Instead use a variable initialized with a Function Expression to define
a function within a block:

if (x) {

  var foo = function() {};

}

You basically can't avoid exceptions if you're doing something non-trivial (using an application development framework, etc.). Go for it.

Without custom exceptions, returning error information from a function that also returns a value can be tricky, not to mention inelegant. Bad solutions include passing in a reference type to hold error information or always returning Objects with a potential
error member. These basically amount to a primitive exception handling hack. Feel free to use custom exceptions when appropriate.

For maximum portability and compatibility, always prefer standards features over non-standards features (e.g.,string.charAt(3) overstring[3] and element access with DOM functions instead of using an application-specific shorthand).

There's no reason to use wrapper objects for primitive types, plus they're dangerous:

var x = new Boolean(false);

if (x) {

  alert('hi');  // Shows 'hi'.

}

Don't do it!

However type casting is fine.

var x = Boolean(0);

if (x) {

  alert('hi');  // This will never be alerted.

}

typeof Boolean(0) == 'boolean';

typeof new Boolean(0) == 'object';

This is very useful for casting things to number, string andboolean.

Multi-level prototype hierarchies are how JavaScript implements inheritance. You have a multi-level hierarchy if you have a user-defined class D with another user-defined class B as its prototype. These hierarchies are much harder to get right than they
first appear!

For that reason, it is best to use goog.inherits() from the Closure Libraryor a similar library function.

function D() {

  goog.base(this)

}

goog.inherits(D, B);

D.prototype.method = function() {

  ...

};

While there are several ways to attach methods and properties to an object created via "new", the preferred style for methods is:

Foo.prototype.bar = function() {

  /* ... */

};

The preferred style for other properties is to initialize the field in the constructor:

/** @constructor */

function Foo() {

  this.bar = value;

}

Why?

Current JavaScript engines optimize based on the "shape" of an object, adding a property to an object (including overriding a value set on the prototype) changes the shape and can degrade performance.

Foo.prototype.dispose = function() {

  this.property_ = null;

};

Instead of:

Foo.prototype.dispose = function() {

  delete this.property_;

};

In modern JavaScript engines, changing the number of properties on an object is much slower than reassigning the values. The delete keyword should be avoided except when it is necessary to remove a property from an object's iterated list of keys, or to change
the result of if (key in obj).

The ability to create closures is perhaps the most useful and often overlooked feature of JS. Here isa good description of how closures work.

One thing to keep in mind, however, is that a closure keeps a pointer to its enclosing scope. As a result, attaching a closure to a DOM element can create a circular reference and thus, a memory leak. For example, in the following code:

function foo(element, a, b) {

  element.onclick = function() { /* uses a and b */ };

}

the function closure keeps a reference to element, a, andb even if it never useselement. Since
element also keeps a reference to the closure, we have a cycle that won't be cleaned up by garbage collection. In these situations, the code can be structured as follows:

function foo(element, a, b) {

  element.onclick = bar(a, b);

}

function bar(a, b) {

  return function() { /* uses a and b */ };

}

eval() makes for confusing semantics and is dangerous to use if the string beingeval()'d contains user input. There's usually a better, clearer, and safer way to write your code, so its use is generally not permitted.

For RPC you can always use JSON and read the result using JSON.parse() instead ofeval().

Let's assume we have a server that returns something like this:

{

  "name": "Alice",

  "id": 31502,

  "email": "looking_glass@example.com"

}

var userInfo = eval(feed);

var email = userInfo['email'];

If the feed was modified to include malicious JavaScript code, then if we use
eval then that code will be executed.

var userInfo = JSON.parse(feed);

var email = userInfo['email'];

With JSON.parse, invalid JSON (including all executable JavaScript) will cause an exception to be thrown.

Using with clouds the semantics of your program. Because the object of thewith can have properties that collide with local variables, it can drastically change the meaning of your program. For example, what does this do?

with (foo) {

  var x = 3;

  return x;

}

Answer: anything. The local variable x could be clobbered by a property offoo and perhaps it even has a setter, in which case assigning3 could cause lots of other code to execute. Don't use
with.

The semantics of this can be tricky. At times it refers to the global object (in most places), the scope of the caller (ineval), a node in the DOM tree (when attached using an event handler HTML attribute), a newly created object
(in a constructor), or some other object (if function wascall()ed orapply()ed).

Because this is so easy to get wrong, limit its use to those places where it is required:

• in constructors
• in methods of objects (including in the creation of closures)

for-in loops are often incorrectly used to loop over the elements in anArray. This is however very error prone because it does not loop from0 tolength - 1 but over all the present keys in the object and
its prototype chain. Here are a few cases where it fails:

function printArray(arr) {

  for (var key in arr) {

    print(arr[key]);

  }

}

printArray([0,1,2,3]);  // This works.

var a = new Array(10);

printArray(a);  // This is wrong.

a = document.getElementsByTagName('*');

printArray(a);  // This is wrong.

a = [0,1,2,3];

a.buhu = 'wine';

printArray(a);  // This is wrong again.

a = new Array;

a[3] = 3;

printArray(a);  // This is wrong again.

Always use normal for loops when using arrays.

function printArray(arr) {

  var l = arr.length;

  for (var i = 0; i < l; i++) {

    print(arr[i]);

  }

}

Associative Arrays are not allowed... or more precisely you are not allowed to use non number indexes for arrays. If you need a map/hash useObject instead ofArray in these cases because the features that you want are
actually features ofObject and not ofArray. Array just happens to extendObject (like any other object in JS and therefore you might as well have usedDate,RegExp or
String).

Do not do this:

var myString = 'A rather long string of English text, an error message \

                actually that just keeps going and going -- an error \

                message to make the Energizer bunny blush (right through \

                those Schwarzenegger shades)! Where was I? Oh yes, \

                you\'ve got an error and all the extraneous whitespace is \

                just gravy.  Have a nice day.';

The whitespace at the beginning of each line can't be safely stripped at compile time; whitespace after the slash will result in tricky errors; and while most script engines support this, it is not part of ECMAScript.

Use string concatenation instead:

var myString = 'A rather long string of English text, an error message ' +

    'actually that just keeps going and going -- an error ' +

    'message to make the Energizer bunny blush (right through ' +

    'those Schwarzenegger shades)! Where was I? Oh yes, ' +

    'you\'ve got an error and all the extraneous whitespace is ' +

    'just gravy.  Have a nice day.';

Use Array and Object literals instead of Array andObject constructors.

Array constructors are error-prone due to their arguments.

// Length is 3.

var a1 = new Array(x1, x2, x3);

// Length is 2.

var a2 = new Array(x1, x2);

// If x1 is a number and it is a natural number the length will be x1.

// If x1 is a number but not a natural number this will throw an exception.

// Otherwise the array will have one element with x1 as its value.

var a3 = new Array(x1);

// Length is 0.

var a4 = new Array();

Because of this, if someone changes the code to pass 1 argument instead of 2 arguments, the array might not have the expected length.

To avoid these kinds of weird cases, always use the more readable array literal.

var a = [x1, x2, x3];

var a2 = [x1, x2];

var a3 = [x1];

var a4 = [];

Object constructors don't have the same problems, but for readability and consistency object literals should be used.

var o = new Object();

var o2 = new Object();

o2.a = 0;

o2.b = 1;

o2.c = 2;

o2['strange key'] = 3;

Should be written as:

var o = {};

var o2 = {

  a: 0,

  b: 1,

  c: 2,

  'strange key': 3

};

Modifying builtins like Object.prototype and Array.prototype are strictly forbidden. Modifying other builtins likeFunction.prototype is less dangerous but still leads to hard to debug issues in production and should
be avoided.

Don't do this:

var f = function () {

    /*@cc_on if (@_jscript) { return 2* @*/  3; /*@ } @*/

};

Conditional Comments hinder automated tools as they can vary the JavaScript syntax tree at runtime.

Properties and methods

• Private properties and methods should be named with a trailing underscore.
• Protected properties and methods should be named without a trailing underscore (like public ones).

For more information on private and protected, read the section onvisibility.

Method and function parameter

Optional function arguments start with opt_.

Functions that take a variable number of arguments should have the last argument namedvar_args. You may not refer tovar_args in the code; use thearguments array.

Optional and variable arguments can also be specified in @param annotations. Although either convention is acceptable to the compiler, using both together is preferred.

Getters and Setters

EcmaScript 5 getters and setters for properties are discouraged. However, if they are used, then getters must not change observable state.

/**

 * WRONG -- Do NOT do this.

 */

var foo = { get next() { return this.nextId++; } };

Accessor functions

Getters and setters methods for properties are not required. However, if they are used, then getters must be namedgetFoo() and setters must be namedsetFoo(value). (For boolean getters,isFoo() is also acceptable, and
often sounds more natural.)

Namespaces

JavaScript has no inherent packaging or namespacing support.

Global name conflicts are difficult to debug, and can cause intractable problems when two projects try to integrate. In order to make it possible to share common JavaScript code, we've adopted conventions to prevent collisions.

Use namespaces for global code

ALWAYS prefix identifiers in the global scope with a unique pseudo namespace related to the project or library. If you are working on "Project Sloth", a reasonable pseudo namespace would besloth.*.

var sloth = {};

sloth.sleep = function() {

  ...

};

Many JavaScript libraries, including the Closure Libraryand Dojo toolkitgive you high-level functions for declaring your namespaces. Be consistent about how you declare your namespaces.

goog.provide('sloth');

sloth.sleep = function() {

  ...

};

Respect namespace ownership

When choosing a child-namespace, make sure that the owners of the parent namespace know what you are doing. If you start a project that creates hats for sloths, make sure that the Sloth team knows that you're usingsloth.hats.

Use different namespaces for external code and internal code

"External code" is code that comes from outside your codebase, and is compiled independently. Internal and external names should be kept strictly separate. If you're using an external library that makes things available infoo.hats.*, your internal
code should not define all its symbols in foo.hats.*, because it will break if the other team defines new symbols.

foo.require('foo.hats');

/**

 * WRONG -- Do NOT do this.

 * @constructor

 * @extends {foo.hats.RoundHat}

 */

foo.hats.BowlerHat = function() {

};

If you need to define new APIs on an external namespace, then you should explicitly export the public API functions, and only those functions. Your internal code should call the internal APIs by their internal names, for consistency and so that the compiler
can optimize them better.

foo.provide('googleyhats.BowlerHat');

foo.require('foo.hats');

/**

 * @constructor

 * @extends {foo.hats.RoundHat}

 */

googleyhats.BowlerHat = function() {

  ...

};

goog.exportSymbol('foo.hats.BowlerHat', googleyhats.BowlerHat);

Alias long type names to improve readability

Use local aliases for fully-qualified types if doing so improves readability. The name of a local alias should match the last part of the type.

/**

 * @constructor

 */

some.long.namespace.MyClass = function() {

};

/**

 * @param {some.long.namespace.MyClass} a

 */

some.long.namespace.MyClass.staticHelper = function(a) {

  ...

};

myapp.main = function() {

  var MyClass = some.long.namespace.MyClass;

  var staticHelper = some.long.namespace.MyClass.staticHelper;

  staticHelper(new MyClass());

};

Do not create local aliases of namespaces. Namespaces should only be aliased usinggoog.scope.

myapp.main = function() {

  var namespace = some.long.namespace;

  namespace.MyClass.staticHelper(new namespace.MyClass());

};

Avoid accessing properties of an aliased type, unless it is an enum.

/** @enum {string} */

some.long.namespace.Fruit = {

  APPLE: 'a',

  BANANA: 'b'

};

myapp.main = function() {

  var Fruit = some.long.namespace.Fruit;

  switch (fruit) {

    case Fruit.APPLE:

      ...

    case Fruit.BANANA:

      ...

  }

};

myapp.main = function() {

  var MyClass = some.long.namespace.MyClass;

  MyClass.staticHelper(null);

};

Never create aliases in the global scope. Use them only in function blocks.

Filenames

Filenames should be all lowercase in order to avoid confusion on case-sensitive platforms. Filenames should end in.js, and should contain no punctuation except for- or
_ (prefer - to _).

You can control how your objects string-ify themselves by defining a custom
toString() method. This is fine, but you need to ensure that your method (1) always succeeds and (2) does not have side-effects. If your method doesn't meet these criteria, it's very easy to run into serious problems. For example, iftoString()
calls a method that does an assert, assert might try to output the name of the object in which it failed, which of course requires callingtoString().

It isn't always possible to initialize variables at the point of declaration, so deferred initialization is fine.

Always use explicit scope - doing so increases portability and clarity. For example, don't rely onwindow being in the scope chain. You might want to use your function in another application for whichwindow is not the content window.

We follow the C++ formatting rules in spirit, with the following additional clarifications.

Curly Braces

Because of implicit semicolon insertion, always start your curly braces on the same line as whatever they're opening. For example:

if (something) {

  // ...

} else {

  // ...

}

Array and Object Initializers

Single-line array and object initializers are allowed when they fit on a line:

var arr = [1, 2, 3];  // No space after [ or before ].

var obj = {a: 1, b: 2, c: 3};  // No space after { or before }.

Multiline array initializers and object initializers are indented 2 spaces, with the braces on their own line, just like blocks.

// Object initializer.

var inset = {

  top: 10,

  right: 20,

  bottom: 15,

  left: 12

};

// Array initializer.

this.rows_ = [

  '"Slartibartfast" <fjordmaster@magrathea.com>',

  '"Zaphod Beeblebrox" <theprez@universe.gov>',

  '"Ford Prefect" <ford@theguide.com>',

  '"Arthur Dent" <has.no.tea@gmail.com>',

  '"Marvin the Paranoid Android" <marv@googlemail.com>',

  'the.mice@magrathea.com'

];

// Used in a method call.

goog.dom.createDom(goog.dom.TagName.DIV, {

  id: 'foo',

  className: 'some-css-class',

  style: 'display:none'

}, 'Hello, world!');

Long identifiers or values present problems for aligned initialization lists, so always prefer non-aligned initialization. For example:

CORRECT_Object.prototype = {

  a: 0,

  b: 1,

  lengthyName: 2

};

Not like this:

WRONG_Object.prototype = {

  a          : 0,

  b          : 1,

  lengthyName: 2

};

Function Arguments

When possible, all function arguments should be listed on the same line. If doing so would exceed the 80-column limit, the arguments must be line-wrapped in a readable way. To save space, you may wrap as close to 80 as possible, or put each argument on its
own line to enhance readability. The indentation may be either four spaces, or aligned to the parenthesis. Below are the most common patterns for argument wrapping:

// Four-space, wrap at 80.  Works with very long function names, survives

// renaming without reindenting, low on space.

goog.foo.bar.doThingThatIsVeryDifficultToExplain = function(

    veryDescriptiveArgumentNumberOne, veryDescriptiveArgumentTwo,

    tableModelEventHandlerProxy, artichokeDescriptorAdapterIterator) {

  // ...

};

// Four-space, one argument per line.  Works with long function names,

// survives renaming, and emphasizes each argument.

goog.foo.bar.doThingThatIsVeryDifficultToExplain = function(

    veryDescriptiveArgumentNumberOne,

    veryDescriptiveArgumentTwo,

    tableModelEventHandlerProxy,

    artichokeDescriptorAdapterIterator) {

  // ...

};

// Parenthesis-aligned indentation, wrap at 80.  Visually groups arguments,

// low on space.

function foo(veryDescriptiveArgumentNumberOne, veryDescriptiveArgumentTwo,

             tableModelEventHandlerProxy, artichokeDescriptorAdapterIterator) {

  // ...

}

// Parenthesis-aligned, one argument per line.  Emphasizes each

// individual argument.

function bar(veryDescriptiveArgumentNumberOne,

             veryDescriptiveArgumentTwo,

             tableModelEventHandlerProxy,

             artichokeDescriptorAdapterIterator) {

  // ...

}

When the function call is itself indented, you're free to start the 4-space indent relative to the beginning of the original statement or relative to the beginning of the current function call. The following are all acceptable indentation styles.

if (veryLongFunctionNameA(

        veryLongArgumentName) ||

    veryLongFunctionNameB(

    veryLongArgumentName)) {

  veryLongFunctionNameC(veryLongFunctionNameD(

      veryLongFunctioNameE(

          veryLongFunctionNameF)));

}

Passing Anonymous Functions

When declaring an anonymous function in the list of arguments for a function call, the body of the function is indented two spaces from the left edge of the statement, or two spaces from the left edge of the function keyword. This is to make the body of
the anonymous function easier to read (i.e. not be all squished up into the right half of the screen).

prefix.something.reallyLongFunctionName('whatever', function(a1, a2) {

  if (a1.equals(a2)) {

    someOtherLongFunctionName(a1);

  } else {

    andNowForSomethingCompletelyDifferent(a2.parrot);

  }

});

var names = prefix.something.myExcellentMapFunction(

    verboselyNamedCollectionOfItems,

    function(item) {

      return item.name;

    });

Aliasing with goog.scope

goog.scope may be used to shorten references to namespaced symbols in programs usingthe
Closure Library.

Only one goog.scope invocation may be added per file. Always place it in the global scope.

The opening goog.scope(function() { invocation must be preceded by exactly one blank line and follow anygoog.provide statements,goog.require statements, or top-level comments. The invocation must be closed on the last
line in the file. Append// goog.scope to the closing statement of the scope. Separate the comment from the semicolon by two spaces.

Similar to C++ namespaces, do not indent under goog.scope declarations. Instead, continue from the 0 column.

Only alias names that will not be re-assigned to another object (e.g., most constructors, enums, and namespaces). Do not do this (see below for how to alias a constructor):

goog.scope(function() {

var Button = goog.ui.Button;

Button = function() { ... };

...

Names must be the same as the last property of the global that they are aliasing.

goog.provide('my.module.SomeType');

goog.require('goog.dom');

goog.require('goog.ui.Button');

goog.scope(function() {

var Button = goog.ui.Button;

var dom = goog.dom;

// Alias new types after the constructor declaration.

my.module.SomeType = function() { ... };

var SomeType = my.module.SomeType;

// Declare methods on the prototype as usual:

SomeType.prototype.findButton = function() {

  // Button as aliased above.

  this.button = new Button(dom.getElement('my-button'));

};

...

});  // goog.scope

Indenting wrapped lines

Except for array literals, object literals, and anonymous functions, all wrapped lines should be indented either left-aligned to a sibling expression above, or four spaces (not two spaces) deeper than a parent expression (where "sibling" and "parent" refer to parenthesis
nesting level).

someWonderfulHtml = '' +

                    getEvenMoreHtml(someReallyInterestingValues, moreValues,

                                    evenMoreParams, 'a duck', true, 72,

                                    slightlyMoreMonkeys(0xfff)) +

                    '';

thisIsAVeryLongVariableName =

    hereIsAnEvenLongerOtherFunctionNameThatWillNotFitOnPrevLine();

thisIsAVeryLongVariableName = siblingOne + siblingTwo + siblingThree +

    siblingFour + siblingFive + siblingSix + siblingSeven +

    moreSiblingExpressions + allAtTheSameIndentationLevel;

thisIsAVeryLongVariableName = operandOne + operandTwo + operandThree +

    operandFour + operandFive * (

        aNestedChildExpression + shouldBeIndentedMore);

someValue = this.foo(

    shortArg,

    'Some really long string arg - this is a pretty common case, actually.',

    shorty2,

    this.bar());

if (searchableCollection(allYourStuff).contains(theStuffYouWant) &&

    !ambientNotification.isActive() && (client.isAmbientSupported() ||

                                        client.alwaysTryAmbientAnyways())) {

  ambientNotification.activate();

}

Blank lines

Use newlines to group logically related pieces of code. For example:

doSomethingTo(x);

doSomethingElseTo(x);

andThen(x);

nowDoSomethingWith(y);

andNowWith(z);

Binary and Ternary Operators

Always put the operator on the preceding line. Otherwise, line breaks and indentation follow the same rules as in other Google style guides. This operator placement was initially agreed upon out of concerns about automatic semicolon insertion. In fact, semicolon
insertion cannot happen before a binary operator, but new code should stick to this style for consistency.

var x = a ? b : c;  // All on one line if it will fit.

// Indentation +4 is OK.

var y = a ?

    longButSimpleOperandB : longButSimpleOperandC;

// Indenting to the line position of the first operand is also OK.

var z = a ?

        moreComplicatedB :

        moreComplicatedC;

This includes the dot operator.

var x = foo.bar().

    doSomething().

    doSomethingElse();

Use sparingly and in general only where required by the syntax and semantics.

Never use parentheses for unary operators such as delete, typeof andvoid or after keywords such asreturn,
throw as well as others (case,in ornew).

For consistency single-quotes (') are preferred to double-quotes ("). This is helpful when creating strings that include HTML:

var msg = 'This is some HTML';

We recommend the use of the JSDoc annotations @private and
@protected to indicate visibility levels for classes, functions, and properties.

The --jscomp_warning=visibility compiler flag turns on compiler warnings for visibility violations. SeeClosure Compiler Warnings.

@private global variables and functions are only accessible to code in the same file.

Constructors marked @private may only be instantiated by code in the same file and by their static and instance members.@private constructors may also be accessed anywhere in the same file for their public static properties and
by theinstanceof operator.

Global variables, functions, and constructors should never be annotated
@protected.

// File 1.

// AA_PrivateClass_ and AA_init_ are accessible because they are global

// and in the same file.

/**

 * @private

 * @constructor

 */

AA_PrivateClass_ = function() {

};

/** @private */

function AA_init_() {

  return new AA_PrivateClass_();

}

AA_init_();

@private properties are accessible to all code in the same file, plus all static methods and instance methods of that class that "owns" the property, if the property belongs to a class. They cannot be accessed or overridden from a subclass in
a different file.

@protected properties are accessible to all code in the same file, plus any static methods and instance methods of any subclass of a class that "owns" the property.

Note that these semantics differ from those of C++ and Java, in that they grant private and protected access to all code in the same file, not just in the same class or class hierarchy. Also, unlike in C++, private properties cannot be overridden by a subclass.

// File 1.

/** @constructor */

AA_PublicClass = function() {

  /** @private */

  this.privateProp_ = 2;

  /** @protected */

  this.protectedProp = 4;

};

/** @private */

AA_PublicClass.staticPrivateProp_ = 1;

/** @protected */

AA_PublicClass.staticProtectedProp = 31;

/** @private */

AA_PublicClass.prototype.privateMethod_ = function() {};

/** @protected */

AA_PublicClass.prototype.protectedMethod = function() {};

// File 2.

/**

 * @return {number} The number of ducks we've arranged in a row.

 */

AA_PublicClass.prototype.method = function() {

  // Legal accesses of these two properties.

  return this.privateProp_ + AA_PublicClass.staticPrivateProp_;

};

// File 3.

/**

 * @constructor

 * @extends {AA_PublicClass}

 */

AA_SubClass = function() {

  // Legal access of a protected static property.

  AA_PublicClass.staticProtectedProp = this.method();

};

goog.inherits(AA_SubClass, AA_PublicClass);

/**

 * @return {number} The number of ducks we've arranged in a row.

 */

AA_SubClass.prototype.method = function() {

  // Legal access of a protected instance property.

  return this.protectedProp;

};

Notice that in JavaScript, there is no distinction between a type (like
AA_PrivateClass_) and the constructor for that type. There is no way to express both that a type is public and its constructor is private (because the constructor could easily be aliased in a way that would defeat the privacy check).

When documenting a type in JSDoc, be as specific and accurate as possible. The types we support are based on theEcmaScript 4 spec.

The JavaScript Type Language

The ES4 proposal contained a language for specifying JavaScript types. We use this language in JsDoc to express the types of function parameters and return values.

As the ES4 proposal has evolved, this language has changed. The compiler still supports old syntaxes for types, but those syntaxes are deprecated.

Types in JavaScript

1

1.0

-5

1e5

Math.PI

new Number(true)

'Hello'

"World"

String(42)

new String('Hello')

new String(42)

true

false

Boolean(0)

new Boolean(true)

new RegExp('hello')

/world/g

new Date

new Date()

null

undefined

function f() {

  return;

}

['foo', 0.3, null]

[]

[11, 22, 33]

[['one', 'two', 'three'], ['foo', 'bar']]

{}

{foo: 'abc', bar: 123, baz: null}

{'foo': 'bar'}

var obj = {};

obj[1] = 'bar';

function(x, y) {

  return x * y;

}

function(x, y) {

  return x * y;

}

/** @constructor */

function SomeClass() {}

new SomeClass();

/** @interface */

function SomeInterface() {}

SomeInterface.prototype.draw = function() {};

/** @constructor */

project.MyClass = function () {}

new project.MyClass()

/** @enum {string} */

project.MyEnum = {

  /** The color blue. */

  BLUE: '#0000dd',

  /** The color red. */

  RED: '#dd0000'

};

document.createElement('div')

document.body.firstChild

htmlDocument.getElementsByTagName('input')[0]

Type Casts

In cases where type-checking doesn't accurately infer the type of an expression, it is possible to add a type cast comment by adding a type annotation comment and enclosing the expression in parentheses. The parentheses are required.

/** @type {number} */ (x)

Nullable vs. Optional Parameters and Properties

Because JavaScript is a loosely-typed language, it is very important to understand the subtle differences between optional, nullable, and undefined function parameters and class properties.

Instances of classes and interfaces are nullable by default. For example, the following declaration

/**

 * Some class, initialized with a value.

 * @param {Object} value Some value.

 * @constructor

 */

function MyClass(value) {

  /**

   * Some value.

   * @type {Object}

   * @private

   */

  this.myValue_ = value;

}

tells the compiler that the myValue_ property holds either an Object or null. IfmyValue_ must never be null, it should be declared like this:

/**

 * Some class, initialized with a non-null value.

 * @param {!Object} value Some value.

 * @constructor

 */

function MyClass(value) {

  /**

   * Some value.

   * @type {!Object}

   * @private

   */

  this.myValue_ = value;

}

This way, if the compiler can determine that somewhere in the code MyClass is initialized with a null value, it will issue a warning.

Optional parameters to functions may be undefined at runtime, so if they are assigned to class properties, those properties must be declared accordingly:

/**

 * Some class, initialized with an optional value.

 * @param {Object=} opt_value Some value (optional).

 * @constructor

 */

function MyClass(opt_value) {

  /**

   * Some value.

   * @type {Object|undefined}

   * @private

   */

  this.myValue_ = opt_value;

}

This tells the compiler that myValue_ may hold an Object, null, or remain undefined.

Note that the optional parameter opt_value is declared to be of type{Object=}, not{Object|undefined}. This is because optional parameters may, by definition, be undefined. While there is no harm in explicitly declaring
an optional parameter as possibly undefined, it is both unnecessary and makes the code harder to read.

Finally, note that being nullable and being optional are orthogonal properties. The following four declarations are all different:

/**

 * Takes four arguments, two of which are nullable, and two of which are

 * optional.

 * @param {!Object} nonNull Mandatory (must not be undefined), must not be null.

 * @param {Object} mayBeNull Mandatory (must not be undefined), may be null.

 * @param {!Object=} opt_nonNull Optional (may be undefined), but if present,

 *     must not be null!

 * @param {Object=} opt_mayBeNull Optional (may be undefined), may be null.

 */

function strangeButTrue(nonNull, mayBeNull, opt_nonNull, opt_mayBeNull) {

  // ...

};

Typedefs

Sometimes types can get complicated. A function that accepts content for an Element might look like:

/**

 * @param {string} tagName

 * @param {(string|Element|Text|Array.<Element>|Array.<Text>)} contents

 * @return {!Element}

 */

goog.createElement = function(tagName, contents) {

  ...

};

You can define commonly used type expressions with a @typedef tag. For example,

/** @typedef {(string|Element|Text|Array.<Element>|Array.<Text>)} */

goog.ElementContent;

/**

 * @param {string} tagName

 * @param {goog.ElementContent} contents

 * @return {!Element}

 */

goog.createElement = function(tagName, contents) {

...

};

Template types

The compiler has limited support for template types. It can only infer the type ofthis inside an anonymous function literal from the type of thethis argument and whether the
this argument is missing.

/**

 * @param {function(this:T, ...)} fn

 * @param {T} thisObj

 * @param {...*} var_args

 * @template T

 */

goog.bind = function(fn, thisObj, var_args) {

...

};

// Possibly generates a missing property warning.

goog.bind(function() { this.someProperty; }, new SomeClass());

// Generates an undefined this warning.

goog.bind(function() { this.someProperty; });

We follow the C++ style for comments in spirit.

All files, classes, methods and properties should be documented with JSDoc comments with the appropriate tags and types. Textual descriptions for properties, methods, method parameters and method return values should be included unless obvious from the property, method, or parameter name.

Inline comments should be of the // variety.

Complete sentences are recommended but not required. Complete sentences should use appropriate capitalization and punctuation.

Comment Syntax

The JSDoc syntax is based on JavaDoc. Many tools extract metadata from JSDoc comments to perform code validation and optimizations. These comments must be well-formed.

/**

 * A JSDoc comment should begin with a slash and 2 asterisks.

 * Inline tags should be enclosed in braces like {@code this}.

 * @desc Block tags should always start on their own line.

 */

JSDoc Indentation

If you have to line break a block tag, you should treat this as breaking a code statement and indent it four spaces.

/**

 * Illustrates line wrapping for long param/return descriptions.

 * @param {string} foo This is a param with a description too long to fit in

 *     one line.

 * @return {number} This returns something that has a description too long to

 *     fit in one line.

 */

project.MyClass.prototype.method = function(foo) {

  return 5;

};

You should not indent the @fileoverview command. You do not have to indent the@desc command.

Even though it is not preferred, it is also acceptable to line up the description.

/**

 * This is NOT the preferred indentation method.

 * @param {string} foo This is a param with a description too long to fit in

 *                     one line.

 * @return {number} This returns something that has a description too long to

 *                  fit in one line.

 */

project.MyClass.prototype.method = function(foo) {

  return 5;

};

HTML in JSDoc

Like JavaDoc, JSDoc supports many HTML tags, like <code>, <pre>, <tt>, <strong>, <ul>, <ol>, <li>, <a>, and others.

This means that plaintext formatting is not respected. So, don't rely on whitespace to format JSDoc:

/**

 * Computes weight based on three factors:

 *   items sent

 *   items received

 *   last timestamp

 */

It'll come out like this:

Computes weight based on three factors: items sent items received last timestamp

Instead, do this:

/**

 * Computes weight based on three factors:

 * <ul>

 * <li>items sent

 * <li>items received

 * <li>last timestamp

 * </ul>

 */

The JavaDoc style guide is a useful resource on how to write well-formed doc comments.

Top/File-Level Comments

A copyright notice and author information are optional. File overviews are generally recommended whenever a file consists of more than a single class definition. The top level comment is designed to orient readers unfamiliar with the code to what is in this
file. If present, it should provide a description of the file's contents and any dependencies or compatibility information. As an example:

/**

 * @fileoverview Description of file, its uses and information

 * about its dependencies.

 */

Class Comments

Classes must be documented with a description and a type tag that identifies the constructor.

/**

 * Class making something fun and easy.

 * @param {string} arg1 An argument that makes this more interesting.

 * @param {Array.<number>} arg2 List of numbers to be processed.

 * @constructor

 * @extends {goog.Disposable}

 */

project.MyClass = function(arg1, arg2) {

  // ...

};

goog.inherits(project.MyClass, goog.Disposable);

Method and Function Comments

Parameter and return types should be documented. The method description may be omitted if it is obvious from the parameter or return type descriptions. Method descriptions should start with a sentence written in the third person declarative voice.

/**

 * Operates on an instance of MyClass and returns something.

 * @param {project.MyClass} obj Instance of MyClass which leads to a long

 *     comment that needs to be wrapped to two lines.

 * @return {boolean} Whether something occurred.

 */

function PR_someMethod(obj) {

  // ...

}

Property Comments

/** @constructor */

project.MyClass = function() {

  /**

   * Maximum number of things per pane.

   * @type {number}

   */

  this.someProperty = 4;

}

JSDoc Tag Reference

/**

 * @fileoverview Utilities for handling textareas.

 * @author kuth@google.com (Uthur Pendragon)

 */

/**

 * Moves to the next position in the selection.

 * Throws {@code goog.iter.StopIteration} when it

 * passes the end of the range.

 * @return {Node} The node at the next position.

 */

goog.dom.RangeIterator.prototype.next = function() {

  // ...

};

/** @const */ var MY_BEER = 'stout';

/**

 * My namespace's favorite kind of beer.

 * @const {string}

 */

mynamespace.MY_BEER = 'stout';

/** @const */ MyClass.MY_BEER = 'stout';

/**

 * Initializes the request.

 * @const

 */

mynamespace.Request.prototype.initialize = function() {

  // This method cannot be overridden in a subclass.

};

/**

 * A rectangle.

 * @constructor

 */

function GM_Rect() {

  ...

}

/** @define {boolean} */

var TR_FLAGS_ENABLE_DEBUG = true;

/**

 * @define {boolean} Whether we know at compile-time that

 *     the browser is IE.

 */

goog.userAgent.ASSUME_IE = false;

/**

 * Determines whether a node is a field.

 * @return {boolean} True if the contents of

 *     the element are editable, but the element

 *     itself is not.

 * @deprecated Use isField().

 */

BN_EditUtil.isTopEditableField = function(node) {

  // ...

};

/**

 * @constructor

 * @dict

 */

function Foo(x) {

  this['x'] = x;

}

var obj = new Foo(123);

var num = obj.x;  // warning

(/** @dict */ { x: 1 }).x = 123;  // warning

/**

 * Enum for tri-state values.

 * @enum {number}

 */

project.TriState = {

  TRUE: 1,

  FALSE: -1,

  MAYBE: 0

};

/** @export */

foo.MyPublicClass.prototype.myPublicMethod = function() {

  // ...

};

goog.exportSymbol('foo.MyPublicClass.prototype.myPublicMethod',

    foo.MyPublicClass.prototype.myPublicMethod);

/** @expose */

MyClass.prototype.exposedProperty = 3;

/**

 * Immutable empty node list.

 * @constructor

 * @extends goog.ds.BasicNodeList

 */

goog.ds.EmptyNodeList = function() {

  ...

};

/**

 * @fileoverview This is an externs file.

 * @externs

 */

var document;

/**

 * @fileoverview Utilities for doing things that require this very long

 * but not indented comment.

 * @author kuth@google.com (Uthur Pendragon)

 */

/**

 * A shape.

 * @interface

 */

function Shape() {};

Shape.prototype.draw = function() {};

/**

 * @constructor

 * @implements {Shape}

 */

function Square() {};

Square.prototype.draw = function() {

  ...

};

/** @inheritDoc */

project.SubClass.prototype.toString() {

  // ...

};

/**

 * A shape.

 * @interface

 */

function Shape() {};

Shape.prototype.draw = function() {};

/**

 * A polygon.

 * @interface

 * @extends {Shape}

 */

function Polygon() {};

Polygon.prototype.getSides = function() {};

goog.object.extend(

    Button.prototype,

    /** @lends {Button.prototype} */ {

      isButton: function() { return true; }

    });

/**

 * @preserve Copyright 2009 SomeThirdParty.

 * Here is the full license text and copyright

 * notice for this file. Note that the notice can span several

 * lines and is only terminated by the closing star and slash:

 */

/** @noalias */

function Range() {}

/** @nocompile */

// JavaScript code

/** @nosideeffects */

function noSideEffectsFn1() {

  // ...

}

/** @nosideeffects */

var noSideEffectsFn2 = function() {

  // ...

};

/** @nosideeffects */

a.prototype.noSideEffectsFn3 = function() {

  // ...

};

/**

 * @return {string} Human-readable representation of project.SubClass.

 * @override

 */

project.SubClass.prototype.toString = function() {

  // ...

};

/**

 * Queries a Baz for items.

 * @param {number} groupNum Subgroup id to query.

 * @param {string|number|null} term An itemName,

 *     or itemId, or null to search everything.

 */

goog.Baz.prototype.query = function(groupNum, term) {

  // ...

};

/**

 * Handlers that are listening to this logger.

 * @private {!Array.<Function>}

 */

this.handlers_ = [];

/**

 * Sets the component's root element to the given element.

 * @param {Element} element Root element for the component.

 * @protected

 */

goog.ui.Component.prototype.setElementInternal = function(element) {

  // ...

};

/**

 * Whether to cancel the event in internal capture/bubble processing.

 * @public {boolean}

 * @suppress {visiblity} Referencing this outside this package is strongly

 * discouraged.

 */

 goog.events.Event.prototype.propagationStopped_ = false;

/**

 * @return {string} The hex ID of the last item.

 */

goog.Baz.prototype.getLastId = function() {

  // ...

  return id;

};

/**

 * Adds a single item, recklessly.

 * @see #addSafely

 * @see goog.Collect

 * @see goog.RecklessAdder#add

 ...

/**

 * @constructor

 * @struct

 */

function Foo(x) {

  this.x = x;

}

var obj = new Foo(123);

var num = obj['x'];  // warning

obj.y = "asdf";  // warning

Foo.prototype = /** @struct */ {

  method1: function() {}

};

Foo.prototype.method2 = function() {};  // warning

/**

 * @fileoverview Event Manager

 * Provides an abstracted interface to the

 * browsers' event systems.

 * @supported So far tested in IE6 and FF1.5

 */

/**

 * @suppress {deprecated}

 */

function f() {

  deprecatedVersionOfF();

}

/**

 * @param {function(this:T, ...)} fn

 * @param {T} thisObj

 * @param {...*} var_args

 * @template T

 */

goog.bind = function(fn, thisObj, var_args) {

   ...

};

pinto.chat.RosterWidget.extern('getRosterElement',

/**

 * Returns the roster widget element.

 * @this pinto.chat.RosterWidget

 * @return {Element}

 */

function() {

  return this.getWrappedComponent_().getElement();

});

/**

 * The message hex ID.

 * @type {string}

 */

var hexId = hexId;

/** @typedef {(string|number)} */

goog.NumberLike;

/** @param {goog.NumberLike} x A number or a string. */

goog.readNumber = function(x) {

  ...

}

You may also see other types of JSDoc annotations in third-party code. These annotations appear in theJSDoc Toolkit Tag Referencebut are currently discouraged
in Google code. You should consider them "reserved" names for future use. These include:

• @augments
• @argument
• @borrows
• @class
• @constant
• @constructs
• @default
• @event
• @example
• @field
• @function
• @ignore
• @inner
• @link
• @memberOf
• @name
• @namespace
• @property
• @public
• @requires
• @returns
• @since
• @static
• @version

All members defined on a class should be in the same file. So, only top-level classes should be provided in a file that contains multiple members defined on the same class (e.g. enums, inner classes, etc).

Do this:

goog.provide('namespace.MyClass');

Not this:

goog.provide('namespace.MyClass');

goog.provide('namespace.MyClass.Enum');

goog.provide('namespace.MyClass.InnerClass');

goog.provide('namespace.MyClass.TypeDef');

goog.provide('namespace.MyClass.CONSTANT');

goog.provide('namespace.MyClass.staticMethod');

Members on namespaces may also be provided:

goog.provide('foo.bar');

goog.provide('foo.bar.method');

goog.provide('foo.bar.CONSTANT');

Use of JS compilers such as the Closure Compiler is required for all customer-facing code.

True and False Boolean Expressions

The following are all false in boolean expressions:

• null
• undefined
• '' the empty string
• 0 the number

But be careful, because these are all true:

• '0' the string
• [] the empty array
• {} the empty object

This means that instead of this:

while (x != null) {

you can write this shorter code (as long as you don't expect x to be 0, or the empty string, or false):

while (x) {

And if you want to check a string to see if it is null or empty, you could do this:

if (y != null && y != '') {

But this is shorter and nicer:

if (y) {

Caution: There are many unintuitive things about boolean expressions. Here are some of them:

• Boolean('0') == true

'0' != true
• 0 != null

0 == []

0 == false
• Boolean(null) == false

null != true

null != false
• Boolean(undefined) == false

undefined != true

undefined != false
• Boolean([]) == true

[] != true

[] == false
• Boolean({}) == true

{} != true

{} != false

Conditional (Ternary) Operator (?:)

Instead of this:

if (val) {

  return foo();

} else {

  return bar();

}

you can write this:

return val ? foo() : bar();

The ternary conditional is also useful when generating HTML:

var html = '<input type="checkbox"' +

    (isChecked ? ' checked' : '') +

    (isEnabled ? '' : ' disabled') +

    ' name="foo">';

&& and ||

These binary boolean operators are short-circuited, and evaluate to the last evaluated term.

"||" has been called the 'default' operator, because instead of writing this:

/** @param {*=} opt_win */

function foo(opt_win) {

  var win;

  if (opt_win) {

    win = opt_win;

  } else {

    win = window;

  }

  // ...

}

you can write this:

/** @param {*=} opt_win */

function foo(opt_win) {

  var win = opt_win || window;

  // ...

}

"&&" is also useful for shortening code. For instance, instead of this:

if (node) {

  if (node.kids) {

    if (node.kids[index]) {

      foo(node.kids[index]);

    }

  }

}

you could do this:

if (node && node.kids && node.kids[index]) {

  foo(node.kids[index]);

}

or this:

var kid = node && node.kids && node.kids[index];

if (kid) {

  foo(kid);

}

However, this is going a little too far:

node && node.kids && node.kids[index] && foo(node.kids[index]);

Iterating over Node Lists

Node lists are often implemented as node iterators with a filter. This means that getting a property like length is O(n), and iterating over the list by re-checking the length will be O(n^2).

var paragraphs = document.getElementsByTagName('p');

for (var i = 0; i < paragraphs.length; i++) {

  doSomething(paragraphs[i]);

}

It is better to do this instead:

var paragraphs = document.getElementsByTagName('p');

for (var i = 0, paragraph; paragraph = paragraphs[i]; i++) {

  doSomething(paragraph);

}

This works well for all collections and arrays as long as the array does not contain things that are treated as boolean false.

In cases where you are iterating over the childNodes you can also use the firstChild and nextSibling properties.

var parentNode = document.getElementById('foo');

for (var child = parentNode.firstChild; child; child = child.nextSibling) {

  doSomething(child);

}