motion的移植和使用

说明:

motion下载地址:http://sourceforge.net/projects/motion/files/motion%20-%203.2/

 
系统: Ubuntu 12.10
开发板:mini2440
linux: 2.6.32
交叉工具链:4.4.3
motion版本:3.2.11.1
 
 
对于PC版本的直接apt-get install motion就可以的具体的使用方法参见这里
本文主要记录一下ARM版本的编译使用:
1.去上边说明的motion下载地址下载3.2.11.1版本
2.配置命令:./configure  --prefix=${PWD}/_install  --host=arm-linux --without-ffmpeg

motion的移植和使用

motion的移植和使用

3.接下来就是make  和 make install了。

motion的移植和使用

motion的移植和使用

4.make install后会在_install/bin/目录下产生motion可执行文件,拷贝到开发板上/root/motion目录下,并在同目录中建motion.conf内容如下:
# Minimal motion example config file provided by the
# Debian motion package - for basic webcam operation.
#
# You most certainly want to investigate
# /usr/share/doc/motion/examples/motion-dist.conf.gz
# for further configuration options. Also, refer to the
# motion man page and /usr/share/doc/motion/motion_guide.html
# for detailed information on configuration options.
 
 
 
daemon off
 
quiet on
 
locate on
 
 
 
# You may very well need to change this (check with 'dmesg'
# after plugging in your webcam).
 
videodevice /dev/video0
 
 
 
# Image size in pixels (valid range is camera dependent).
 
width 320
 
height 240
 
 
 
framerate 25
 
quality 85
 
auto_brightness off
 
 
 
# General threshold level and noise threshold
# level (for distinguishing between noise and motion).
 
threshold_tune off
 
threshold 4500
 
noise_level 64
 
 
# Initial brightness, contrast, hue (NTSC), and saturation.
# 0 = disabled (valid range 0-255).
 
brightness 0
 
contrast 0
 
saturation 0
 
hue 0
 
 
# Encode movies in real-time (install ffmpeg before enabling).
 
ffmpeg_cap_new on
 
 
# Codec to be used by ffmpeg for the video compression.
# Supported formats: mpeg4, msmpeg4.
 
ffmpeg_video_codec msmpeg4
 
 
 
# Target base directory for pictures and films (you may need
# to change this (or change its permissions) depending on
# which system user runs motion).
 
target_dir /root/motion/snapshots
 
 
# Define a port number (e.g. 8000) to enable the mini-http server.
 
# 0 = disabled.
 
webcam_port 8081
 
 
# Set to 'off' to allow anybody (not just localhost) to view the
# webcam via the mini-http server (http://hostname:port).
 
webcam_localhost off
 
 
snapshot_interval 1
 
snapshot_filename snapshot
 
 
webcam_quality 50
 
webcam_maxrate 8
 
#on_event_start /root/motion/on_motion_detected
 
#on_event_end /root/motion/on_motion_end
 
gap 10
 
5.运行./motion -c motion.conf

motion的移植和使用

6.用chrome浏览器实时监控(360极速,世界之窗测试不可以)

motion的移植和使用

上一篇:EL的隐含对象(三)【访问环境信息的隐含对象】


下一篇:PHP笔记-PHP中Web Service.