R1
[R1]int g0/0/0
[R1-GigabitEthernet0/0/0]ip ad 192.168.1.1 30
Jan 13 2021 22:20:11-08:00 R1 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP
on the interface GigabitEthernet0/0/0 has entered the UP state.
[R1-GigabitEthernet0/0/0]
[R1-GigabitEthernet0/0/0]int g0/0/1
[R1-GigabitEthernet0/0/1]
[R1-GigabitEthernet0/0/1]
[R1-GigabitEthernet0/0/1]ip ad 192.168.1.5 30
Jan 13 2021 22:20:30-08:00 R1 %%01IFNET/4/LINK_STATE(l)[1]:The line protocol IP
on the interface GigabitEthernet0/0/1 has entered the UP state.
[R1-GigabitEthernet0/0/1]q
[R1]int lo 1
[R1-LoopBack1]
[R1-LoopBack1]ip ad 192.168.1.129 29
[R1-LoopBack1]int lo 2
[R1-LoopBack2]ip ad 192.168.1.137 29
[R1-LoopBack2]
R2
[R2]int g 0/0/0
[R2-GigabitEthernet0/0/0]ip ad 192.168.1.2 30
Jan 13 2021 22:21:48-08:00 R2 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP
on the interface GigabitEthernet0/0/0 has entered the UP state.
[R2-GigabitEthernet0/0/0]
[R2-GigabitEthernet0/0/0]int g 0/01
^
Error: Unrecognized command found at '^' position.
[R2-GigabitEthernet0/0/0]int g 0/0/1
[R2-GigabitEthernet0/0/1]
[R2-GigabitEthernet0/0/1]
[R2-GigabitEthernet0/0/1]ip ad 192.168.1.9 30
Jan 13 2021 22:22:23-08:00 R2 %%01IFNET/4/LINK_STATE(l)[1]:The line protocol IP
on the interface GigabitEthernet0/0/1 has entered the UP state.
[R2-GigabitEthernet0/0/1]
[R2-GigabitEthernet0/0/1]
[R2-GigabitEthernet0/0/1]int lo 1
[R2-LoopBack1]ip ad 192.168.1.145 29
[R2-LoopBack1]
[R2-LoopBack1]
[R2-LoopBack1]int lo 2
[R2-LoopBack2]ip ad 192.168.1.153 29
[R2-LoopBack2]
R3
[R3]int g0/0/0
[R3-GigabitEthernet0/0/0]ip ad 192.168.1.161 28
[R3-GigabitEthernet0/0/0]
Jan 13 2021 22:23:53-08:00 R3 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP
on the interface GigabitEthernet0/0/0 has entered the UP state.
[R3-GigabitEthernet0/0/0]
[R3-GigabitEthernet0/0/0]
[R3-GigabitEthernet0/0/0]undo ip ad 192.168.1.161 28
Jan 13 2021 22:24:44-08:00 R3 %%01IFNET/4/LINK_STATE(l)[1]:The line protocol IP
on the interface GigabitEthernet0/0/0 has entered the DOWN state.
[R3-GigabitEthernet0/0/0]
[R3-GigabitEthernet0/0/0]
[R3-GigabitEthernet0/0/0]ip ad 192.168.1.6 30
[R3-GigabitEthernet0/0/0]
Jan 13 2021 22:25:48-08:00 R3 %%01IFNET/4/LINK_STATE(l)[2]:The line protocol IP
on the interface GigabitEthernet0/0/0 has entered the UP state.
[R3-GigabitEthernet0/0/0]int g0/0/1
[R3-GigabitEthernet0/0/1]ip ad 192.168.1.14 30
Jan 13 2021 22:26:18-08:00 R3 %%01IFNET/4/LINK_STATE(l)[3]:The line protocol IP
on the interface GigabitEthernet0/0/1 has entered the UP state.
[R3-GigabitEthernet0/0/1]int g 0/0/2
[R3-GigabitEthernet0/0/2]
[R3-GigabitEthernet0/0/2]
[R3-GigabitEthernet0/0/2]ip ad 192.168.1.161 28
Jan 13 2021 22:26:47-08:00 R3 %%01IFNET/4/LINK_STATE(l)[4]:The line protocol IP
on the interface GigabitEthernet0/0/2 has entered the UP state.
[R3-GigabitEthernet0/0/2]
[R3-GigabitEthernet0/0/2]q
[R3]dh
[R3]dhcp en
[R3]dhcp enable
Info: The operation may take a few seconds. Please wait for a moment.done.
[R3]int g
[R3]int GigabitEthernet 0/0/2
[R3-GigabitEthernet0/0/2]dhcp se
[R3-GigabitEthernet0/0/2]dhcp select g
[R3-GigabitEthernet0/0/2]dhcp select global
[R3-GigabitEthernet0/0/2]q
[R3]ip po 0
Info: It's successful to create an IP address pool.
[R3-ip-pool-0]net
[R3-ip-pool-0]netbios-type
[R3-ip-pool-0]network 192.168.1.160 mask 28
[R3-ip-pool-0]
[R3-ip-pool-0]gate
[R3-ip-pool-0]gateway-list 192.168.1.161
[R3-ip-pool-0]dns-list 4.4.4.4
[R3-ip-pool-0]q
R4
[R4]int g 0/0/0
[R4-GigabitEthernet0/0/0]ip ad 192.168.1.10 30
Jan 13 2021 22:31:15-08:00 R4 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP
on the interface GigabitEthernet0/0/0 has entered the UP state.
[R4-GigabitEthernet0/0/0]int g0/0/1
[R4-GigabitEthernet0/0/1]
[R4-GigabitEthernet0/0/1]ip ad 192.168.1.13 30
Jan 13 2021 22:31:37-08:00 R4 %%01IFNET/4/LINK_STATE(l)[1]:The line protocol IP
on the interface GigabitEthernet0/0/1 has entered the UP state.
[R4-GigabitEthernet0/0/1]int
[R4-GigabitEthernet0/0/1]int g0/0/2
[R4-GigabitEthernet0/0/2]ip ad 192.168.1.17 30
Jan 13 2021 22:32:20-08:00 R4 %%01IFNET/4/LINK_STATE(l)[2]:The line protocol IP
on the interface GigabitEthernet0/0/2 has entered the UP state.
[R4]int g4/0/0
[R4-GigabitEthernet4/0/0]ip ad 192.168.1.13
^
Error:Incomplete command found at '^' position.
[R4-GigabitEthernet4/0/0]ip ad 192.168.1.21 30
[R4-GigabitEthernet4/0/0]
Jan 13 2021 22:37:45-08:00 R4 %%01IFNET/4/LINK_STATE(l)[3]:The line protocol IP
on the interface GigabitEthernet4/0/0 has entered the UP state.
[R4-GigabitEthernet4/0/0]int lo 1
[R4-LoopBack1]ip ad 192.168.1.177 28
[R4-LoopBack1]
R5
[R5]int g0/0/0
[R5-GigabitEthernet0/0/0]
[R5-GigabitEthernet0/0/0]ip ad 192.168.1.18 30
[R5-GigabitEthernet0/0/0]int g0/0/1
[R5-GigabitEthernet0/0/1]ip ad 183.1.1.1 24
[R5-GigabitEthernet0/0/1]int g0/0/2
[R5-GigabitEthernet0/0/2]
[R5-GigabitEthernet0/0/2]ip ad 192.168.1.22 30
Jan 13 2021 22:40:19-08:00 R5 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP
on the interface GigabitEthernet0/0/2 has entered the UP state.
[R5-GigabitEthernet0/0/2]
[R5-GigabitEthernet0/0/2]int lo 1
[R5-LoopBack1]ip ad 192.168.1.177 28
R6
[R6]int g0/0/0
[R6-GigabitEthernet0/0/0]ip ad 183.1.1.2 24
[R6-GigabitEthernet0/0/0]
Jan 13 2021 22:41:21-08:00 R6 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP
on the interface GigabitEthernet0/0/0 has entered the UP state.
[R6-GigabitEthernet0/0/0]int lo1
[R6-LoopBack1]
[R6-LoopBack1]ip ad 184.1.1.1 24
[R6-LoopBack1]