ans Single VIP LLB and SLB config
# 配置设备工作模式和开启的功能 > enable ans mode FR MBF Edge USNIP L3 PMTUD Done > enable ans feature WL LB CS SSL IPv6PT CH Done > # 设置设备的管理IP ( 需要重启系统才可生效, 重启系统前请先保存配置. save ansconfig ) > set ans config -IPAddress 192.168.11.11 -netmask 255.255.255.0 Done > # 设置用于连通内网的SNIP地址 ( enable ans mode usnip ) > add ans ip 192.168.11.1 255.255.255.0 -mgmtAccess ENABLED -restrictAccess ENABLED Done > # 设置设备主机名 > set ans hostName SURFILTER Done > # 设置时区 > set ans param -cookieversion 1 -timezone "GMT+08:00-CST-Asia/Shanghai" Done > # 设置时间, 格式为: YYYYmmddHHMM 注意时区是否正确 > shell date 201903181424 Mon Dec 10 17:45:00 CST 2018 Done > shell date +'%Y-%m-%d %H:%M:%S' 2019-03-18 14:24:09 Done > # 添加NTP服务器 ( 非常规操作方式, 直接修改NTP配置文件 ) > shell vi /etc/ntp.conf # Common elements of NTP configuration # # Do not edit: changes will be lost following reboot. # For site-specific NTP configuration, see the instructions in /etc/ntp.conf # # We won't allow *anything* from hosts not listed in the configuration # This means you need a restrict line for each server restrict default ignore restrict -6 default ignore # Allow just about anything from localhost, IPv4. restrict 127.0.0.1 mask 255.255.255.255 driftfile /var/db/ntp.drift logfile /var/log/ntpd.log # Log everything, even from ntpd (which otherwise defaults to "all =sync") logconfig =all +all ####################### server 218.75.4.130 minpoll 6 maxpoll 10 restrict 218.75.4.130 nomodify notrap nopeer noquery ~ ~ ~ :wq Done > # 启动NTP服务器 > enable ntp sync Done > # 添加用于连通ISP的VIP地址 > add ans ip 192.168.110.41 255.255.255.0 -type VIP Done > add ans ip 192.168.120.45 255.255.255.0 -type VIP Done > # 添加 VLAN > add vlan 11 Done > add vlan 21 Done > bind vlan 11 -ifnum 1/6 Done > bind vlan 11 -IPAddress 192.168.110.41 255.255.255.0 Done > bind vlan 21 -ifnum 1/7 Done > bind vlan 21 -IPAddress 192.168.120.45 255.255.255.0 Done > # 设置针对内网的反向NAT > set rnat 192.168.11.0 255.255.255.0 -natIP 192.168.110.41 Done > set rnat 192.168.11.0 255.255.255.0 -natIP 192.168.120.45 Done > # 添加 NetProfile , 绑定 SNIP > add netProfile net_pf_internal -srcIP 192.168.11.1 Done > # 添加ISP网关服务器地址 > add server srv_isp_ct 192.168.110.1 Done > add server srv_isp_cnc 192.168.210.1 Done > # 添加ISP监视器 > add lb monitor mon_ping_net_pf PING -LRTM DISABLED -netProfile net_pf_internal Done > # 添加ISP服务并绑定对应监视器 > add service svc_isp_ct srv_isp_ct ANY * Done > bind service svc_isp_ct -monitorName mon_ping_net_pf Done > > add service svc_isp_cnc srv_isp_cnc ANY * Done > bind service svc_isp_cnc -monitorName mon_ping_net_pf Done > # 添加ISP负载均衡虚拟服务器并绑定对应服务 > add lb vserver lb_vsrv_isp_llb_all ANY 0.0.0.0 0 -lbMethod ROUNDROBIN -persistenceType DESTIP Done > bind lb vserver lb_vsrv_isp_llb_all svc_isp_ct Done > bind lb vserver lb_vsrv_isp_llb_all svc_isp_cnc Done > > add lb vserver lb_vsrv_isp_llb_ct ANY 0.0.0.0 0 -lbMethod ROUNDROBIN -persistenceType DESTIP Done > bind lb vserver lb_vsrv_isp_llb_ct svc_isp_ct Done > set lb vserver lb_vsrv_isp_llb_ct -backupVServer lb_vsrv_isp_llb_all Done > > add lb vserver lb_vsrv_isp_llb_cnc ANY 0.0.0.0 0 -lbMethod ROUNDROBIN -persistenceType DESTIP Done > bind lb vserver lb_vsrv_isp_llb_cnc svc_isp_cnc Done > set lb vserver lb_vsrv_isp_llb_cnc -backupVServer lb_vsrv_isp_llb_all Done > # 添加默认的LB路由项 > add lb route 0.0.0.0 0.0.0.0 lb_vsrv_isp_llb_all Done > # 添加并应用 PBR > add ans pbr pbr_isp_ct_internel ALLOW -srcIP = 192.168.11.1 -destIP = 192.168.110.1 -nextHop 127.0.0.1 -priority 1101 -msr ENABLED Done > add ans pbr pbr_isp_cnc_internel ALLOW -srcIP = 192.168.11.1 -destIP = 192.168.120.1 -nextHop 127.0.0.1 -priority 1102 -msr ENABLED Done > apply ns pbrs Done > # 发布本地ssh服务 > add server srv_local_loopback 127.0.0.1 Done > add service svc_local_ssh srv_local_loopback TCP 22 Done > > add lb vserver lb_vsrv_isp_ct_ssh TCP 192.168.110.41 22 -lbMethod ROUNDROBIN -persistenceType SOURCEIP Done > bind lb vserver lb_vsrv_isp_ct_ssh svc_local_ssh Done > add lb vserver lb_vsrv_isp_cnc_ssh TCP 192.168.120.45 22 -lbMethod ROUNDROBIN -persistenceType SOURCEIP Done > bind lb vserver lb_vsrv_isp_cnc_ssh svc_local_ssh Done > # 发布本地webgui服务 > add server srv_local_loopback 127.0.0.1 Done > add service svc_local_webgui srv_local_loopback HTTP 80 Done > > add lb vserver lb_vsrv_isp_ct_webgui HTTP 192.168.110.41 8088 -lbMethod ROUNDROBIN -persistenceType COOKIEINSERT Done > bind lb vserver lb_vsrv_isp_ct_webgui svc_local_webgui Done > add lb vserver lb_vsrv_isp_cnc_webgui HTTP 192.168.120.45 8088 -lbMethod ROUNDROBIN -persistenceType COOKIEINSERT Done > bind lb vserver lb_vsrv_isp_cnc_webgui svc_local_webgui Done > # 发布内网web服务 > add server srv_web_hfs 192.168.11.249 Done > add service svc_web_hfs srv_web_hfs HTTP 80 Done > > add lb vserver lb_vsrv_web_hfs_ct HTTP 192.168.110.41 80 -lbmethod ROUNDROBIN -persistenceType COOKIEINSERT Done > bind lb vserver lb_vsrv_web_hfs_ct svc_web_hfs Done > add lb vserver lb_vsrv_web_hfs_cnc HTTP 192.168.120.45 80 -lbmethod ROUNDROBIN -persistenceType COOKIEINSERT Done > bind lb vserver lb_vsrv_web_hfs_cnc svc_web_hfs Done >
> show ip
Ipaddress TD Type Mode Arp Icmp Vserver State
--------- -- ---- ---- --- ---- ------- ------
1) 192.168.11.11 0 HGANS IP Active Enabled Enabled NA Enabled
2) 192.168.11.1 0 SNIP Active Enabled Enabled NA Enabled
3) 192.168.110.41 0 VIP Active Enabled Enabled Enabled Enabled
4) 192.168.120.45 0 VIP Active Enabled Enabled Enabled Enabled
Done
>
> show route
Network Netmask Gateway/OwnedIP State TD Type
------- ------- --------------- ----- -- ----
1) 0.0.0.0 0.0.0.0 lb_vsrv_isp_llb_ UP 0 |LBROUTE
all
2) 127.0.0.0 255.0.0.0 127.0.0.1 UP 0 PERMANENT
3) 192.168.11.0 255.255.255.0 192.168.11.11 UP 0 DIRECT
4) 192.168.110.0 255.255.255.0 192.168.110.41 UP 0 DIRECT
5) 192.168.120.0 255.255.255.0 192.168.120.45 UP 0 DIRECT
Done
>
> show rnat
1) Network: 192.168.11.0 Netmask: 255.255.255.0
NatIP: 192.168.110.41 Td: 0
2) Network: 192.168.11.0 Netmask: 255.255.255.0
NatIP: 192.168.120.45 Td: 0
Done
>
> show ans pbr
1) Name: pbr_isp_ct_internel
Action: ALLOW Hits: 686
srcIP = 192.168.11.1
destIP = 192.168.110.1
srcMac: Protocol:
Vlan: Interface:
Active Status: ENABLED Applied Status: APPLIED
Priority: 1101
NextHop: 127.0.0.1
MSR: ENABLED STATE: UP
2) Name: pbr_isp_cnc_internel
Action: ALLOW Hits: 676
srcIP = 192.168.11.1
destIP = 192.168.120.1
srcMac: Protocol:
Vlan: Interface:
Active Status: ENABLED Applied Status: APPLIED
Priority: 1102
NextHop: 127.0.0.1
MSR: ENABLED STATE: UP
Done
>
> show server
1) Name: srv_isp_ct State:ENABLED
IPAddress: 192.168.110.1
2) Name: srv_isp_cnc State:ENABLED
IPAddress: 192.168.120.1
3) Name: srv_local_loopback State:ENABLED
IPAddress: 127.0.0.1
4) Name: srv_web_hfs State:ENABLED
IPAddress: 192.168.11.249
Done
>
> show service -summary
---------------------------------------------------------------------------------------------
Name State IP Addr Port Protocol MaxClients MaxReqs
---------------------------------------------------------------------------------------------
1 svc_isp_ct UP srv_isp_ct * ANY 0 0
2 svc_isp_cnc UP srv_isp_cnc * ANY 0 0
3 svc_..._ssh UP srv_loc...oopback 22 TCP 256 0
4 svc_...bgui UP srv_loc...oopback 80 HTTP 0 0
5 svc_web_hfs UP srv_web_hfs 80 HTTP 0 0
Done
>
> show lb vserver -summary
--------------------------------------------------------------------------------------------------------------------------------------
Name State Effec State Td IP Addr Port Prot Method TCPProfName HTTPProfName NetProfName DBProfName
--------------------------------------------------------------------------------------------------------------------------------------
1 lb_..._all UP UP 0 0.0.0.0 0 ANY RO...IN
2 lb_...b_ct UP UP 0 0.0.0.0 0 ANY RO...IN
3 lb_..._cnc UP UP 0 0.0.0.0 0 ANY RO...IN
4 lb_..._ssh UP UP 0 192.168.110.41 22 TCP RO...IN
5 lb_..._ssh UP UP 0 192.168.120.45 22 TCP RO...IN
6 lb_...bgui UP UP 0 192.168.110.41 8088 HTTP RO...IN
7 lb_...bgui UP UP 0 192.168.120.45 8088 HTTP RO...IN
8 lb_...s_ct UP UP 0 192.168.110.41 80 HTTP LE...ON
9 lb_..._cnc UP UP 0 192.168.120.45 80 HTTP LE...ON
Done
>
============= End