很多文件系统都自带iperf 命令，所以不用作多的移植工作。

如下查看他的帮助信息。

Qt@aplex:~$ iperf -h

Usage: iperf [-s|-c host] [options]

       iperf [-h|--help] [-v|--version]

Client/Server:

  -f, --format    [kmKM]   format to report: Kbits, Mbits, KBytes, MBytes

  -i, --interval  #        seconds between periodic bandwidth reports

  -l, --len       #[KM]    length of buffer to read or write (default 8 KB)

  -m, --print_mss          print TCP maximum segment size (MTU - TCP/IP header)

  -o, --output    <filename> output the report or error message to this specified file

  -p, --port      #        server port to listen on/connect to

  -u, --udp                use UDP rather than TCP

  -w, --window    #[KM]    TCP window size (socket buffer size)

  -B, --bind      <host>   bind to <host>, an interface or multicast address

  -C, --compatibility      for use with older versions does not sent extra msgs

  -M, --mss       #        set TCP maximum segment size (MTU - 40 bytes)

  -N, --nodelay            set TCP no delay, disabling Nagle's Algorithm

  -V, --IPv6Version        Set the domain to IPv6

Server specific:

  -s, --server             run in server mode

  -U, --single_udp         run in single threaded UDP mode

  -D, --daemon             run the server as a daemon

Client specific:

  -b, --bandwidth #[KM]    for UDP, bandwidth to send at in bits/sec

                           (default 1 Mbit/sec, implies -u)

  -c, --client    <host>   run in client mode, connecting to <host>

  -d, --dualtest           Do a bidirectional test simultaneously

  -n, --num       #[KM]    number of bytes to transmit (instead of -t)

  -r, --tradeoff           Do a bidirectional test individually

  -t, --time      #        time in seconds to transmit for (default 10 secs)

  -F, --fileinput <name>   input the data to be transmitted from a file

  -I, --stdin              input the data to be transmitted from stdin

  -L, --listenport #       port to receive bidirectional tests back on

  -P, --parallel  #        number of parallel client threads to run

  -T, --ttl       #        time-to-live, for multicast (default 1)

  -Z, --linux-congestion <algo>  set TCP congestion control algorithm (Linux only)

Miscellaneous:

  -x, --reportexclude [CDMSV]   exclude C(connection) D(data) M(multicast) S(settings) V(server) reports

  -y, --reportstyle C      report as a Comma-Separated Values

  -h, --help               print this message and quit

  -v, --version            print version information and quit

[KM] Indicates options that support a K or M suffix for kilo- or mega-

The TCP window size option can be set by the environment variable

TCP_WINDOW_SIZE. Most other options can be set by an environment variable

IPERF_<long option name>, such as IPERF_BANDWIDTH.

Report bugs to <iperf-users@lists.sourceforge.net>

在PC终端下运行：

iperf -s

在测试终端下运行：

iperf -c 192.168.0.144

就可以的出速度。

测试会不会丢包可以直接用ping 进行测试。

ping 192.168.0.144