[root@server ~]# yum install net-snmp-utils net-snmp-devel
安装完成之后， 先停止snmpd，再创建具有只读属性的SNMP 账户。 .
[root@server ~]# service snmpd stop
[root@server ~]# net-snmp-create-v3-user -A snmpv3pass -a MD5 -x DES snmpv3user
================================================================== snmp V3的方式设置简单，而且安全性更高。
配置方法：
1.停止snmpd服务
#service snmpd stop
2.增加snmpv3用户，并设置认证以及加密方式
# net-snmp-create-v3-user
Enter a SNMPv3 user name to create:
enocsnmpv3
Enter authentication pass-phrase:
enocsnmpv3pw
Enter encryption pass-phrase:
[press return to reuse the authentication pass-phrase]
enocsnmpv3pk
adding the following line to /var/lib/net-snmp/snmpd.conf:
createUser enocsnmpv3 MD5 "enocsnmpv3pw" DES enocsnmpv3pk
adding the following line to /etc/snmp/snmpd.conf:
rwuser enocsnmpv3
3.启动snmpd服务
# service snmpd restart
现通过snmpwalk测试一下：
# snmpwalk -v3 -uenocsnmpv3 -lauth -aMD5 -A"enocsnmpv3pw" -X"enocsnmpv3pk" localhost | more
SNMPv2-MIB::sysDescr.0 = STRING: Linux CentOS60A 2.6.32-71.el6.i686 #1 SMP Fri Nov 12 04:17:17 GMT 2010 i686
SNMPv2-MIB::sysObjectID.0 = OID: SNMPv2-SMI::org
DISMAN-EVENT-MIB::sysUpTimeInstance = Timeticks: (9443) 0:01:34.43
或：
# snmpwalk -v3 -uenocsnmpv3 -lauth -aMD5 -A"enocsnmpv3pw" localhost .1 | more
或：
# snmpwalk -v3 -lauth -uenocsnmpv3 -aMD5 -xDES -A"enocsnmpv3pw" -X"enocsnmpv3pk" localhost .1 | more
补充：
SNMP Version 3 specific
-a PROTOCOL set authentication protocol (MD5|SHA)
-A PASSPHRASE set authentication protocol pass phrase
-e ENGINE-ID set security engine ID (e.g. 800000020109840301)
-E ENGINE-ID set context engine ID (e.g. 800000020109840301)
-l LEVEL set security level (noAuthNoPriv|authNoPriv|authPriv)
-n CONTEXT set context name (e.g. bridge1)
-u USER-NAME set security name (e.g. bert)
-x PROTOCOL set privacy protocol (DES|AES)
-X PASSPHRASE set privacy protocol pass phrase
-Z BOOTS,TIME set destination engine boots/time ================================================================== ## OUTPUT ##
adding the following line to /var/lib/net-snmp/snmpd.conf:
createUser snmpv3user MD5 "snmpv3pass" DES
adding the following line to /etc/snmp/snmpd.conf:
rouser snmpv3user
[root@server ~]# service snmpd start
SNMPv3测试
snmpwalk 是测试SNMP配置和输出出色的工具。成功的测试结果应当有大量的输出数据。
[root@server ~]# snmpwalk -u snmpv3user -A snmpv3pass -a MD5 -l authnoPriv 192.168.1.2 -v3
### OUTPUT ###
SNMPv2-MIB::sysDescr.0 = STRING: Linux server.example.tst 2.6.32-71.el6.i686 #1 SMP Fri Nov 12 04:17:17 GMT 2010 i686
SNMPv2-MIB::sysObjectID.0 = OID: NET-SNMP-MIB::netSnmpAgentOIDs.10
DISMAN-EVENT-MIB::sysUpTimeInstance = Timeticks: (28963) 0:04:49.63
SNMPv2-MIB::sysORLastChange.0 = Timeticks: (1) 0:00:00.01
SNMPv2-MIB::sysORID.1 = OID: SNMP-MPD-MIB::snmpMPDMIBObjects.3.1.1
SNMPv2-MIB::sysORID.2 = OID: SNMP-USER-BASED-SM-MIB::usmMIBCompliance
SNMPv2-MIB::sysORID.3 = OID: SNMP-FRAMEWORK-MIB::snmpFrameworkMIBCompliance
SNMPv2-MIB::sysORID.4 = OID: SNMPv2-MIB::snmpMIB
SNMPv2-MIB::sysORID.5 = OID: TCP-MIB::tcpMIB
SNMPv2-MIB::sysORID.6 = OID: IP-MIB::ip
SNMPv2-MIB::sysORID.7 = OID: UDP-MIB::udpMIB
SNMPv2-MIB::sysORID.8 = OID: SNMP-VIEW-BASED-ACM-MIB::vacmBasicGroup
SNMPv2-MIB::sysORDescr.1 = STRING: The MIB for Message Processing and Dispatching.
SNMPv2-MIB::sysORDescr.2 = STRING: The MIB for Message Processing and Dispatching.
SNMPv2-MIB::sysORDescr.3 = STRING: The SNMP Management Architecture MIB.
SNMPv2-MIB::sysORDescr.4 = STRING: The MIB module for SNMPv2 entities
SNMPv2-MIB::sysORDescr.5 = STRING: The MIB module for managing TCP implementation
## and the output continues ##
删除SNMPv3账户
SNMPv3 账户信息被包含在两个文件之中。删除账户即删除这个文件中的信息即可。
root@server:~# service snmpd stop
root@server:~# vim /var/lib/net-snmp/snmpd.conf
## there should be a similar encrypted line that contains information on the user ##
## this line is removed ##
usmUser 1 3 0x80001f8880056e06573a1e895100000000 0x736e6d70763375736572000x736e6d7076337573657200 NULL .1.3.6.1.6.3.10.1.1.2 0x945ed3c9708ea5493f53f953b45a4513 .1.3.6.1.6.3.10.1.2.2 0x945ed3c9708ea5493f53f953b45a4513 ""
root@server:~# vim /etc/snmp/snmpd.conf
## The following line is removed ##
rouser snmpv3user
root@server:~# service snmpd start
防火墙调节（可选）
下面的例子中的防火墙规则可以被用于限制被允许进行SNMP查询的源IP地址。两个IP地址（例如，192.168.1.100/101）被置于白名单中。
root@server:~# iptables -A INPUT -s 192.168.1.100/32 -p udp –dport 161 -j ACCEPT
root@server:~# iptables -A INPUT -s 192.168.1.101/32 -p udp –dport 161 -j ACCEPT
root@server:~# iptables -A INPUT -p udp –dport 161 -j DROP
思科交换机和路由器配置SNMPv3
思科交换机和路由器同样支持SNMPv3。下面的例子将创建一个访问控制列表（ACL）限制允许做SNMP查询的源IP地址。但是，这步被跳过了。
设置访问控制列表（ACL）（可选）
## global config mode ##
ip access-list standard SNMP_ACL
permit 192.168.1.100
permit 192.168.1.100
SNMPv3 配置
下面的配置创建一个名为v3Group与认证AuthNoPriv安全级别v3的组。前面定义的可选访问列表也支持设定。
## global config mode ##
## With ACL ##
snmp-server group v3Group v3 auth access SNMP_ACL
## Without ACL ##
snmp-server group v3Group v3 auth
用户v3user被创建并添加在v3Group下。 DES加密密钥 snmp-server user snmpv3user v3Group v3 auth md5 snmpv3pass priv DES snmpv3pass AES加密密钥
snmp-server user snmpv3user v3Group v3 auth md5 snmpv3pass priv AES 128 snmpv3pass
SNMPv3测试
SNMP用户和相关组可以在Cisco设备中查看。
### privileged EXEC mode ##
show snmp user
User name: v3user
Engine ID: ************************
storage-type: nonvolatile active
Authentication Protocol: MD5
Privacy Protocol: AES128
Group-name: v3Group
任何Linux设备中的snmpwalk的都可以用来验证配置和检查输出。
snmpwalk -u snmpv3user -A snmpv3pass -a MD5 -l authnoPriv 192.168.1.3 -v3
iso.3.6.1.2.1.1.1.0 = STRING: "Cisco IOS Software”
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2012 by Cisco Systems, Inc.
iso.3.6.1.2.1.1.2.0 = OID: iso.3.6.1.4.1.9.1.1166
iso.3.6.1.2.1.1.7.0 = INTEGER: 78
iso.3.6.1.2.1.1.8.0 = Timeticks: (0) 0:00:00.00
iso.3.6.1.2.1.2.1.0 = INTEGER: 54
iso.3.6.1.2.1.2.2.1.1.1 = INTEGER: 1
iso.3.6.1.2.1.2.2.1.1.2 = INTEGER: 2
iso.3.6.1.2.1.2.2.1.1.3 = INTEGER: 3
## output truncated ## 分享：