本实验环境为：Cisco Packet Tracer 5.3
拓扑如下：
PC1的配置：
PC2的配置：
三层交换机的配置：
1.实现f0/1àvlan1:vlan1的ip为192.168.1.254
|
Switch>en Switch#conf t Enter configuration commands, one per line. End with CNTL/Z. Switch(config)#int vlan 1 Switch(config-if)#ip add 192.168.1.254 255.255.255.0 Switch(config-if)#no shut %LINK-5-CHANGED: Interface Vlan1, changed state to up %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan1, changed state to up Switch(config-if)#int f0/1 Switch(config-if)#sw acc vlan 1 |
2.实现f0/2àvlan2:vlan2的ip为192.168.2.254
|
Switch(config)#vlan 2 Switch(config-vlan)#int vlan 2 %LINK-5-CHANGED: Interface Vlan2, changed state to up Switch(config-if)#ip add 192.168.2.254 255.255.255.0 Switch(config-if)#no shut Switch(config-if)#int f0/2 Switch(config-if)#sw acc vlan 2 %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan2, changed state to up Switch(config-if)# |
3.很重要的下一步，开启三层交换机的路由功能
|
Switch(config)#ip routing |
测试：pc1 ping pc2
试验完成。
附件：http://down.51cto.com/data/2360176
本文转自tiancong 51CTO博客，原文链接:http://blog.51cto.com/tiancong/821650