centos7.5 安装openstack

系统环境:

CentOS-7.5

安装前需要修改 /etc/hosts文件,添加 127.0.0.1 node1 (node1 为当前机器名)
否则会报如下错误:
Could not start Service[rabbitmq-server]: Execution of '/sbin/service rabbitmq-server start' returned 1: Starting rabbitmq-server: FAILED - check /var/log/rabbitmq/startup_{log, _err}

 

 centos7.5 安装openstack

安装步骤:

关闭防火墙
#systemctl stop firewalld.service
关闭selinux
找到/etc/selinux/config 文件把文件中的SELINUX=enforcing   改为SELINUXdisabled 即可

 

[root@node1 openstack]# sudo yum install -y http://rdo.fedorapeople.org/rdo-release.rpm
[root@node1 openstack]# sudo yum install -y openstack-packstack
[root@node1 openstack]# packstack --allinone

 注:此步骤时间较长,需要长时间等待

Welcome to the Packstack setup utility

The installation log file is available at: /var/tmp/packstack/20210414-104501-V5Uapg/openstack-setup.log
Packstack changed given value  to required value /root/.ssh/id_rsa.pub

Installing:
Clean Up                                             [ DONE ]
Discovering ip protocol version                      [ DONE ]
Setting up ssh keys                                  [ DONE ]
Preparing servers                                    [ DONE ]
Pre installing Puppet and discovering hosts' details [ DONE ]
Preparing pre-install entries                        [ DONE ]
Setting up CACERT                                    [ DONE ]
Preparing AMQP entries                               [ DONE ]
Preparing MariaDB entries                            [ DONE ]
Fixing Keystone LDAP config parameters to be undef if empty[ DONE ]
Preparing Keystone entries                           [ DONE ]
Preparing Glance entries                             [ DONE ]
Checking if the Cinder server has a cinder-volumes vg[ DONE ]
Preparing Cinder entries                             [ DONE ]
Preparing Nova API entries                           [ DONE ]
Creating ssh keys for Nova migration                 [ DONE ]
Gathering ssh host keys for Nova migration           [ DONE ]
Preparing Nova Compute entries                       [ DONE ]
Preparing Nova Scheduler entries                     [ DONE ]
Preparing Nova VNC Proxy entries                     [ DONE ]
Preparing OpenStack Network-related Nova entries     [ DONE ]
Preparing Nova Common entries                        [ DONE ]
Preparing Neutron API entries                        [ DONE ]
Preparing Neutron L3 entries                         [ DONE ]
Preparing Neutron L2 Agent entries                   [ DONE ]
Preparing Neutron DHCP Agent entries                 [ DONE ]
Preparing Neutron Metering Agent entries             [ DONE ]
Checking if NetworkManager is enabled and running    [ DONE ]
Preparing OpenStack Client entries                   [ DONE ]
Preparing Horizon entries                            [ DONE ]
Preparing Swift builder entries                      [ DONE ]
Preparing Swift proxy entries                        [ DONE ]
Preparing Swift storage entries                      [ DONE ]
Preparing Gnocchi entries                            [ DONE ]
Preparing Redis entries                              [ DONE ]
Preparing Ceilometer entries                         [ DONE ]
Preparing Aodh entries                               [ DONE ]
Preparing Puppet manifests                           [ DONE ]
Copying Puppet modules and manifests                 [ DONE ]
Applying 192.168.101.116_controller.pp
192.168.101.116_controller.pp:                        [ DONE ]           
Applying 192.168.101.116_network.pp
192.168.101.116_network.pp:                           [ DONE ]        
Applying 192.168.101.116_compute.pp
192.168.101.116_compute.pp:                           [ DONE ]        
Applying Puppet manifests                            [ DONE ]
Finalizing                                           [ DONE ]

 **** Installation completed successfully ******

Additional information:
 * Parameter CONFIG_NEUTRON_L2_AGENT: You have chosen OVN Neutron backend. Note that this backend does not support the VPNaaS or FWaaS services. Geneve will be used as the encapsulation method for tenant networks
 * A new answerfile was created in: /root/packstack-answers-20210414-104502.txt
 * Time synchronization installation was skipped. Please note that unsynchronized time on server instances might be problem for some OpenStack components.
 * Warning: NetworkManager is active on 192.168.101.116. OpenStack networking currently does not work on systems that have the Network Manager service enabled.
 * File /root/keystonerc_admin has been created on OpenStack client host 192.168.101.116. To use the command line tools you need to source the file.
 * To access the OpenStack Dashboard browse to http://192.168.101.116/dashboard .
Please, find your login credentials stored in the keystonerc_admin in your home directory.
 * The installation log file is available at: /var/tmp/packstack/20210414-104501-V5Uapg/openstack-setup.log
 * The generated manifests are available at: /var/tmp/packstack/20210414-104501-V5Uapg/manifests

看到"Installation completed successfully",则安装成功

查看登录用户名密码:

[root@localhost opt]# cat /root/keystonerc_admin
unset OS_SERVICE_TOKEN
    export OS_USERNAME=admin
    export OS_PASSWORD='982d134fe29b4a47'
    export OS_REGION_NAME=RegionOne
    export OS_AUTH_URL=http://192.168.101.116:5000/v3
    export PS1='[\u@\h \W(keystone_admin)]\$ '
    
export OS_PROJECT_NAME=admin
export OS_USER_DOMAIN_NAME=Default
export OS_PROJECT_DOMAIN_NAME=Default
export OS_IDENTITY_API_VERSION=3

 

通过浏览器访问 http://192.168.1.105/dashboard 登录后截图如下:

centos7.5 安装openstack

 

上一篇:如何在Shell脚本中逐行读取文件


下一篇:Linux 函数 - 第13天 - 20210413