#

# This is the main Apache HTTP server configuration file.  It contains the

# configuration directives that give the server its instructions.

# See <URL:http://httpd.apache.org/docs/2.2> for detailed information.

# In particular, see

# <URL:http://httpd.apache.org/docs/2.2/mod/directives.html>

# for a discussion of each configuration directive.

#

# Do NOT simply read the instructions in here without understanding

# what they do.  They're here only as hints or reminders.  If you are unsure

# consult the online docs. You have been warned.

#

# Configuration and logfile names: If the filenames you specify for many

# of the server's control files begin with "/" (or "drive:/" for Win32), the

# server will use that explicit path.  If the filenames do *not* begin

# with "/", the value of ServerRoot is prepended -- so "logs/foo_log"

# with ServerRoot set to "/home/oauth/data/opt/jboss/httpd/httpd" will be interpreted by the

# server as "/home/oauth/data/opt/jboss/httpd/httpd/logs/foo_log".

#

# ServerRoot: The top of the directory tree under which the server's

# configuration, error, and log files are kept.

#

# Do not add a slash at the end of the directory path.  If you point

# ServerRoot at a non-local disk, be sure to point the LockFile directive

# at a local disk.  If you wish to share the same ServerRoot for multiple

# httpd daemons, you will need to change at least LockFile and PidFile.

#

ServerRoot "/home/oauth/data/opt/jboss/httpd/httpd"

#

# Listen: Allows you to bind Apache to specific IP addresses and/or

# ports, instead of the default. See also the <VirtualHost>

# directive.

#

# Change this to Listen on specific IP addresses as shown below to

# prevent Apache from glomming onto all bound IP addresses.

#

#Listen 172.16.1.224:80

Listen 80

#

# Dynamic Shared Object (DSO) Support

#

# To be able to use the functionality of a module which was built as a DSO you

# have to place corresponding `LoadModule' lines at this location so the

# directives contained in it are actually available _before_ they are used.

# Statically compiled modules (those listed by `httpd -l') do not need

# to be loaded here.

#

# Example:

# LoadModule foo_module modules/mod_foo.so

#

LoadModule authn_file_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_authn_file.so

LoadModule authn_dbm_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_authn_dbm.so

LoadModule authn_anon_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_authn_anon.so

LoadModule authn_dbd_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_authn_dbd.so

LoadModule authn_default_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_authn_default.so

LoadModule authn_alias_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_authn_alias.so

LoadModule authz_host_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_authz_host.so

LoadModule authz_groupfile_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_authz_groupfile.so

LoadModule authz_user_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_authz_user.so

LoadModule authz_dbm_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_authz_dbm.so

LoadModule authz_owner_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_authz_owner.so

LoadModule authz_default_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_authz_default.so

LoadModule auth_basic_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_auth_basic.so

LoadModule auth_digest_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_auth_digest.so

LoadModule advertise_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_advertise.so

LoadModule file_cache_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_file_cache.so

LoadModule cache_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_cache.so

LoadModule disk_cache_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_disk_cache.so

LoadModule mem_cache_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_mem_cache.so

LoadModule dbd_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_dbd.so

LoadModule dumpio_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_dumpio.so

LoadModule reqtimeout_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_reqtimeout.so

LoadModule ext_filter_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_ext_filter.so

LoadModule include_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_include.so

LoadModule filter_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_filter.so

LoadModule substitute_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_substitute.so

LoadModule deflate_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_deflate.so

LoadModule log_config_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_log_config.so

LoadModule log_forensic_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_log_forensic.so

LoadModule logio_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_logio.so

LoadModule env_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_env.so

LoadModule mime_magic_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_mime_magic.so

LoadModule cern_meta_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_cern_meta.so

LoadModule expires_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_expires.so

LoadModule headers_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_headers.so

LoadModule ident_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_ident.so

LoadModule usertrack_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_usertrack.so

LoadModule unique_id_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_unique_id.so

LoadModule setenvif_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_setenvif.so

LoadModule version_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_version.so

LoadModule proxy_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_proxy.so

LoadModule proxy_connect_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_proxy_connect.so

LoadModule proxy_ftp_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_proxy_ftp.so

LoadModule proxy_http_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_proxy_http.so

LoadModule proxy_scgi_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_proxy_scgi.so

LoadModule proxy_ajp_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_proxy_ajp.so

LoadModule proxy_cluster_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_proxy_cluster.so

LoadModule ssl_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_ssl.so

LoadModule mime_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_mime.so

LoadModule dav_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_dav.so

LoadModule status_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_status.so

LoadModule autoindex_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_autoindex.so

LoadModule asis_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_asis.so

LoadModule info_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_info.so

LoadModule suexec_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_suexec.so

LoadModule cgi_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_cgi.so

LoadModule cgid_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_cgid.so

LoadModule jk_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_jk.so

LoadModule manager_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_manager.so

LoadModule slotmem_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_slotmem.so

LoadModule dav_fs_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_dav_fs.so

LoadModule vhost_alias_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_vhost_alias.so

LoadModule negotiation_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_negotiation.so

LoadModule dir_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_dir.so

LoadModule imagemap_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_imagemap.so

LoadModule actions_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_actions.so

LoadModule speling_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_speling.so

LoadModule userdir_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_userdir.so

LoadModule alias_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_alias.so

LoadModule rewrite_module /home/oauth/data/opt/jboss/httpd/lib/httpd/modules/mod_rewrite.so

<IfModule !mpm_netware_module>

<IfModule !mpm_winnt_module>

#

# If you wish httpd to run as a different user or group, you must run

# httpd as root initially and it will switch.

#

# User/Group: The name (or #number) of the user/group to run httpd as.

# It is usually good practice to create a dedicated user and group for

# running httpd, as with most system services.

#

User daemon

Group daemon

</IfModule>

</IfModule>

# 'Main' server configuration

#

# The directives in this section set up the values used by the 'main'

# server, which responds to any requests that aren't handled by a

# <VirtualHost> definition.  These values also provide defaults for

# any <VirtualHost> containers you may define later in the file.

#

# All of these directives may appear inside <VirtualHost> containers,

# in which case these default settings will be overridden for the

# virtual host being defined.

#

#

# ServerAdmin: Your address, where problems with the server should be

# e-mailed.  This address appears on some server-generated pages, such

# as error documents.  e.g. admin@your-domain.com

#

#ServerAdmin you@example.com

#

# ServerName gives the name and port that the server uses to identify itself.

# This can often be determined automatically, but we recommend you specify

# it explicitly to prevent problems during startup.

#

# If your host doesn't have a registered DNS name, enter its IP address here.

#

ServerName 192.168.101.105:80

#

# DocumentRoot: The directory out of which you will serve your

# documents. By default, all requests are taken from this directory, but

# symbolic links and aliases may be used to point to other locations.

#

DocumentRoot "/home/oauth/data/opt/jboss/httpd/htdocs/htdocs"

#

# Each directory to which Apache has access can be configured with respect

# to which services and features are allowed and/or disabled in that

# directory (and its subdirectories).

#

# First, we configure the "default" to be a very restrictive set of

# features.

#

<Directory />

    Options FollowSymLinks

    AllowOverride None

    Order deny,allow

    Deny from all

</Directory>

#

# Note that from this point forward you must specifically allow

# particular features to be enabled - so if something's not working as

# you might expect, make sure that you have specifically enabled it

# below.

#

#

# This should be changed to whatever you set DocumentRoot to.

#

<Directory "/home/oauth/data/opt/jboss/httpd/htdocs/htdocs">

    #

    # Possible values for the Options directive are "None", "All",

    # or any combination of:

    #   Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews

    #

    # Note that "MultiViews" must be named *explicitly* --- "Options All"

    # doesn't give it to you.

    #

    # The Options directive is both complicated and important.  Please see

    # http://httpd.apache.org/docs/2.2/mod/core.html#options

    # for more information.

    #

    Options Indexes FollowSymLinks

    #

    # AllowOverride controls what directives may be placed in .htaccess files.

    # It can be "All", "None", or any combination of the keywords:

    #   Options FileInfo AuthConfig Limit

    #

    AllowOverride None

    #

    # Controls who can get stuff from this server.

    #

    Order allow,deny

    Allow from all

</Directory>

#

# DirectoryIndex: sets the file that Apache will serve if a directory

# is requested.

#

<IfModule dir_module>

    DirectoryIndex index.html

</IfModule>

#

# The following lines prevent .htaccess and .htpasswd files from being

# viewed by Web clients.

#

<FilesMatch "^\.ht">

    Order allow,deny

    Deny from all

    Satisfy All

</FilesMatch>

#

# ErrorLog: The location of the error log file.

# If you do not specify an ErrorLog directive within a <VirtualHost>

# container, error messages relating to that virtual host will be

# logged here.  If you *do* define an error logfile for a <VirtualHost>

# container, that host's errors will be logged there and not here.

#

ErrorLog "logs/error_log"

#

# LogLevel: Control the number of messages logged to the error_log.

# Possible values include: debug, info, notice, warn, error, crit,

# alert, emerg.

#

LogLevel warn

<IfModule log_config_module>

    #

    # The following directives define some format nicknames for use with

    # a CustomLog directive (see below).

    #

    LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined

    LogFormat "%h %l %u %t \"%r\" %>s %b" common

    <IfModule logio_module>

      # You need to enable mod_logio.c to use %I and %O

      LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio

    </IfModule>

    #

    # The location and format of the access logfile (Common Logfile Format).

    # If you do not define any access logfiles within a <VirtualHost>

    # container, they will be logged here.  Contrariwise, if you *do*

    # define per-<VirtualHost> access logfiles, transactions will be

    # logged therein and *not* in this file.

    #

    CustomLog "logs/access_log" common

    #

    # If you prefer a logfile with access, agent, and referer information

    # (Combined Logfile Format) you can use the following directive.

    #

    #CustomLog "logs/access_log" combined

</IfModule>

<IfModule alias_module>

    #

    # Redirect: Allows you to tell clients about documents that used to

    # exist in your server's namespace, but do not anymore. The client

    # will make a new request for the document at its new location.

    # Example:

    # Redirect permanent /foo http://www.example.com/bar

    #

    # Alias: Maps web paths into filesystem paths and is used to

    # access content that does not live under the DocumentRoot.

    # Example:

    # Alias /webpath /full/filesystem/path

    #

    # If you include a trailing / on /webpath then the server will

    # require it to be present in the URL.  You will also likely

    # need to provide a <Directory> section to allow access to

    # the filesystem path.

    #

    # ScriptAlias: This controls which directories contain server scripts.

    # ScriptAliases are essentially the same as Aliases, except that

    # documents in the target directory are treated as applications and

    # run by the server when requested rather than as documents sent to the

    # client.  The same rules about trailing "/" apply to ScriptAlias

    # directives as to Alias.

    #

    ScriptAlias /cgi-bin/ "/home/oauth/data/opt/jboss/httpd/htdocs/cgi-bin/"

</IfModule>

<IfModule cgid_module>

    #

    # ScriptSock: On threaded servers, designate the path to the UNIX

    # socket used to communicate with the CGI daemon of mod_cgid.

    #

    #Scriptsock logs/cgisock

</IfModule>

#

# "/home/oauth/data/opt/jboss/httpd/htdocs/cgi-bin" should be changed to whatever your ScriptAliased

# CGI directory exists, if you have that configured.

#

<Directory "/home/oauth/data/opt/jboss/httpd/htdocs/cgi-bin">

    AllowOverride None

    Options None

    Order allow,deny

    Allow from all

</Directory>

#

# DefaultType: the default MIME type the server will use for a document

# if it cannot otherwise determine one, such as from filename extensions.

# If your server contains mostly text or HTML documents, "text/plain" is

# a good value.  If most of your content is binary, such as applications

# or images, you may want to use "application/octet-stream" instead to

# keep browsers from trying to display binary files as though they are

# text.

#

DefaultType text/plain

<IfModule mime_module>

    #

    # TypesConfig points to the file containing the list of mappings from

    # filename extension to MIME-type.

    #

    TypesConfig conf/mime.types

    #

    # AddType allows you to add to or override the MIME configuration

    # file specified in TypesConfig for specific file types.

    #

    #AddType application/x-gzip .tgz

    #

    # AddEncoding allows you to have certain browsers uncompress

    # information on the fly. Note: Not all browsers support this.

    #

    #AddEncoding x-compress .Z

    #AddEncoding x-gzip .gz .tgz

    #

    # If the AddEncoding directives above are commented-out, then you

    # probably should define those extensions to indicate media types:

    #

    AddType application/x-compress .Z

    AddType application/x-gzip .gz .tgz

    #

    # AddHandler allows you to map certain file extensions to "handlers":

    # actions unrelated to filetype. These can be either built into the server

    # or added with the Action directive (see below)

    #

    # To use CGI scripts outside of ScriptAliased directories:

    # (You will also need to add "ExecCGI" to the "Options" directive.)

    #

    #AddHandler cgi-script .cgi

    # For type maps (negotiated resources):

    #AddHandler type-map var

    #

    # Filters allow you to process content before it is sent to the client.

    #

    # To parse .shtml files for server-side includes (SSI):

    # (You will also need to add "Includes" to the "Options" directive.)

    #

    #AddType text/html .shtml

    #AddOutputFilter INCLUDES .shtml

</IfModule>

#

# The mod_mime_magic module allows the server to use various hints from the

# contents of the file itself to determine its type.  The MIMEMagicFile

# directive tells the module where the hint definitions are located.

#

#MIMEMagicFile conf/magic

#

# Customizable error responses come in three flavors:

# 1) plain text 2) local redirects 3) external redirects

#

# Some examples:

#ErrorDocument 500 "The server made a boo boo."

#ErrorDocument 404 /missing.html

#ErrorDocument 404 "/cgi-bin/missing_handler.pl"

#ErrorDocument 402 http://www.example.com/subscription_info.html

#

#

# MaxRanges: Maximum number of Ranges in a request before

# returning the entire resource, or 0 for unlimited

# Default setting is to accept 200 Ranges

#MaxRanges 0

#

# EnableMMAP and EnableSendfile: On systems that support it,

# memory-mapping or the sendfile syscall is used to deliver

# files.  This usually improves server performance, but must

# be turned off when serving from networked-mounted

# filesystems or if support for these functions is otherwise

# broken on your system.

#

#EnableMMAP off

#EnableSendfile off

# Supplemental configuration

#

# The configuration files in the conf/extra/ directory can be

# included to add extra features or to modify the default configuration of

# the server, or you may simply copy their contents here and change as

# necessary.

# Server-pool management (MPM specific)

#Include conf/extra/httpd-mpm.conf

# Multi-language error messages

#Include conf/extra/httpd-multilang-errordoc.conf

# Fancy directory listings

#Include conf/extra/httpd-autoindex.conf

# Language settings

#Include conf/extra/httpd-languages.conf

# User home directories

#Include conf/extra/httpd-userdir.conf

# Real-time info on requests and configuration

#Include conf/extra/httpd-info.conf

# Virtual hosts

#Include conf/extra/httpd-vhosts.conf

# Local access to the Apache HTTP Server Manual

#Include conf/extra/httpd-manual.conf

# Distributed authoring and versioning (WebDAV)

#Include conf/extra/httpd-dav.conf

# Various default settings

#Include conf/extra/httpd-default.conf

# Secure (SSL/TLS) connections

Include conf/extra/httpd-ssl.conf

#

# Note: The following must must be present to support

#       starting without SSL on platforms with no /dev/random equivalent

#       but a statically compiled-in mod_ssl.

#

# MOD_CLUSTER_ADDS

# Adjust to you hostname and subnet.

<IfModule manager_module>

  Listen 192.168.101.105:6666

  <VirtualHost 192.168.101.105:6666>

    <Location />

     Order deny,allow

     Deny from all

     Allow from all

    </Location>

    KeepAlive on

    KeepAliveTimeout 300

    MaxKeepAliveRequests 0

    #ServerAdvertise on http://192.168.101.105:6666

    ServerAdvertise on

    AdvertiseFrequency 5

    #AdvertiseSecurityKey cnta.gov.cn

    #AdvertiseGroup @ADVIP@:23364

    ManagerBalancerName modcluster

    EnableMCPMReceive

    AllowDisplay On

    <Location /mod_cluster_manager>

       SetHandler mod_cluster-manager

       Order deny,allow

       Deny from all

       Allow from all

    </Location>

  </VirtualHost>

  ProxyRequests Off
  ProxyPass / balancer://modcluster/
  ProxyPassReverse / balancer://modcluster/

</IfModule>

#

# This is the Apache server configuration file providing SSL support.

# It contains the configuration directives to instruct the server how to

# serve pages over an https connection. For detailing information about these

# directives see <URL:http://httpd.apache.org/docs/2.2/mod/mod_ssl.html>

#

# Do NOT simply read the instructions in here without understanding

# what they do.  They're here only as hints or reminders.  If you are unsure

# consult the online docs. You have been warned.

#

#

# Pseudo Random Number Generator (PRNG):

# Configure one or more sources to seed the PRNG of the SSL library.

# The seed data should be of good random quality.

# WARNING! On some platforms /dev/random blocks if not enough entropy

# is available. This means you then cannot use the /dev/random device

# because it would lead to very long connection times (as long as

# it requires to make more entropy available). But usually those

# platforms additionally provide a /dev/urandom device which doesn't

# block. So, if available, use this one instead. Read the mod_ssl User

# Manual for more details.

#

#SSLRandomSeed startup file:/dev/random  512

#SSLRandomSeed startup file:/dev/urandom 512

#SSLRandomSeed connect file:/dev/random  512

#SSLRandomSeed connect file:/dev/urandom 512

#

# When we also provide SSL we have to listen to the

# standard HTTP port (see above) and to the HTTPS port

#

# Note: Configurations that use IPv6 but not IPv4-mapped addresses need two

#       Listen directives: "Listen [::]:443" and "Listen 0.0.0.0:443"

#

Listen 443

##

##  SSL Global Context

##

##  All SSL configuration in this context applies both to

##  the main server and all SSL-enabled virtual hosts.

##

#

#   Some MIME-types for downloading Certificates and CRLs

#

AddType application/x-x509-ca-cert .crt

AddType application/x-pkcs7-crl    .crl

#   Pass Phrase Dialog:

#   Configure the pass phrase gathering process.

#   The filtering dialog program (`builtin' is a internal

#   terminal dialog) has to provide the pass phrase on stdout.

#SSLPassPhraseDialog  builtin

#   Inter-Process Session Cache:

#   Configure the SSL Session Cache: First the mechanism

#   to use and second the expiring timeout (in seconds).

#SSLSessionCache         "dbm:/home/oauth/data/opt/jboss/httpd/httpd/logs/ssl_scache"

SSLSessionCache        "shmcb:/home/oauth/data/opt/jboss/httpd/httpd/logs/ssl_scache(512000)"

SSLSessionCacheTimeout  600

#   Semaphore:

#   Configure the path to the mutual exclusion semaphore the

#   SSL engine uses internally for inter-process synchronization.

SSLMutex  "file:/home/oauth/data/opt/jboss/httpd/httpd/logs/ssl_mutex"

SSLCryptoDevice builtin

##

## SSL Virtual Host Context

##

<VirtualHost _default_:443>

#   General setup for the virtual host

#DocumentRoot "/home/oauth/data/opt/jboss/httpd/htdocs/htdocs"

ServerName 192.168.101.105:443

#ServerAdmin you@example.com

ErrorLog "/home/oauth/data/opt/jboss/httpd/httpd/logs/error_log"

TransferLog "/home/oauth/data/opt/jboss/httpd/httpd/logs/access_log"

#   SSL Engine Switch:

#   Enable/Disable SSL for this virtual host.

SSLEngine on

#   SSL Protocol support:

# List the enable protocol levels with which clients will be able to

# connect.  Disable SSLv2 access by default:

SSLProtocol all -SSLv2

#   SSL Cipher Suite:

#   List the ciphers that the client is permitted to negotiate.

#   See the mod_ssl documentation for a complete list.

#SSLCipherSuite ALL:!ADH:!EXPORT56:RC4+RSA:+HIGH:+MEDIUM:+LOW:+SSLv2:+EXP:+eNULL

SSLCipherSuite ALL

#   Server Certificate:

#   Point SSLCertificateFile at a PEM encoded certificate.  If

#   the certificate is encrypted, then you will be prompted for a

#   pass phrase.  Note that a kill -HUP will prompt again.  Keep

#   in mind that if you have both an RSA and a DSA certificate you

#   can configure both in parallel (to also allow the use of DSA

#   ciphers, etc.)

SSLCertificateFile "/home/oauth/data/opt/jboss/httpd/httpd/conf/server-crt.crt"

#SSLCertificateFile "/home/oauth/data/opt/jboss/httpd/httpd/conf/server-dsa.crt"

#   Server Private Key:

#   If the key is not combined with the certificate, use this

#   directive to point at the key file.  Keep in mind that if

#   you've both a RSA and a DSA private key you can configure

#   both in parallel (to also allow the use of DSA ciphers, etc.)

SSLCertificateKeyFile "/home/oauth/data/opt/jboss/httpd/httpd/conf/server-private.key"

#SSLCertificateKeyFile "/home/oauth/data/opt/jboss/httpd/httpd/conf/server-dsa.key"

#   Server Certificate Chain:

#   Point SSLCertificateChainFile at a file containing the

#   concatenation of PEM encoded CA certificates which form the

#   certificate chain for the server certificate. Alternatively

#   the referenced file can be the same as SSLCertificateFile

#   when the CA certificates are directly appended to the server

#   certificate for convinience.

SSLCertificateChainFile "/home/oauth/data/opt/jboss/httpd/httpd/conf/server-crt.crt"

#   Certificate Authority (CA):

#   Set the CA certificate verification path where to find CA

#   certificates for client authentication or alternatively one

#   huge file containing all of them (file must be PEM encoded)

#   Note: Inside SSLCACertificatePath you need hash symlinks

#         to point to the certificate files. Use the provided

#         Makefile to update the hash symlinks after changes.

#SSLCACertificatePath "/home/oauth/data/opt/jboss/httpd/httpd/conf/ssl.crt"

#SSLCACertificateFile "/home/oauth/data/opt/jboss/httpd/httpd/conf/ssl.crt/ca-bundle.crt"

#   Certificate Revocation Lists (CRL):

#   Set the CA revocation path where to find CA CRLs for client

#   authentication or alternatively one huge file containing all

#   of them (file must be PEM encoded)

#   Note: Inside SSLCARevocationPath you need hash symlinks

#         to point to the certificate files. Use the provided

#         Makefile to update the hash symlinks after changes.

#SSLCARevocationPath "/home/oauth/data/opt/jboss/httpd/httpd/conf/ssl.crl"

#SSLCARevocationFile "/home/oauth/data/opt/jboss/httpd/httpd/conf/ssl.crl/ca-bundle.crl"

#   Client Authentication (Type):

#   Client certificate verification type and depth.  Types are

#   none, optional, require and optional_no_ca.  Depth is a

#   number which specifies how deeply to verify the certificate

#   issuer chain before deciding the certificate is not valid.

#SSLVerifyClient require

#SSLVerifyDepth  10

#   Access Control:

#   With SSLRequire you can do per-directory access control based

#   on arbitrary complex boolean expressions containing server

#   variable checks and other lookup directives.  The syntax is a

#   mixture between C and Perl.  See the mod_ssl documentation

#   for more details.

#<Location />

#SSLRequire (    %{SSL_CIPHER} !~ m/^(EXP|NULL)/ \

#            and %{SSL_CLIENT_S_DN_O} eq "Snake Oil, Ltd." \

#            and %{SSL_CLIENT_S_DN_OU} in {"Staff", "CA", "Dev"} \

#            and %{TIME_WDAY} >= 1 and %{TIME_WDAY} <= 5 \

#            and %{TIME_HOUR} >= 8 and %{TIME_HOUR} <= 20       ) \

#           or %{REMOTE_ADDR} =~ m/^192\.76\.162\.[0-9]+$/

#</Location>

#   SSL Engine Options:

#   Set various options for the SSL engine.

#   o FakeBasicAuth:

#     Translate the client X.509 into a Basic Authorisation.  This means that

#     the standard Auth/DBMAuth methods can be used for access control.  The

#     user name is the `one line' version of the client's X.509 certificate.

#     Note that no password is obtained from the user. Every entry in the user

#     file needs this password: `xxj31ZMTZzkVA'.

#   o ExportCertData:

#     This exports two additional environment variables: SSL_CLIENT_CERT and

#     SSL_SERVER_CERT. These contain the PEM-encoded certificates of the

#     server (always existing) and the client (only existing when client

#     authentication is used). This can be used to import the certificates

#     into CGI scripts.

#   o StdEnvVars:

#     This exports the standard SSL/TLS related `SSL_*' environment variables.

#     Per default this exportation is switched off for performance reasons,

#     because the extraction step is an expensive operation and is usually

#     useless for serving static content. So one usually enables the

#     exportation for CGI and SSI requests only.

#   o StrictRequire:

#     This denies access when "SSLRequireSSL" or "SSLRequire" applied even

#     under a "Satisfy any" situation, i.e. when it applies access is denied

#     and no other module can change it.

#   o OptRenegotiate:

#     This enables optimized SSL connection renegotiation handling when SSL

#     directives are used in per-directory context.

#SSLOptions +FakeBasicAuth +ExportCertData +StrictRequire

<FilesMatch "\.(cgi|shtml|phtml|php)$">

    SSLOptions +StdEnvVars

</FilesMatch>

<Directory "/home/oauth/data/opt/jboss/httpd/htdocs/cgi-bin">

    SSLOptions +StdEnvVars

</Directory>

#   SSL Protocol Adjustments:

#   The safe and default but still SSL/TLS standard compliant shutdown

#   approach is that mod_ssl sends the close notify alert but doesn't wait for

#   the close notify alert from client. When you need a different shutdown

#   approach you can use one of the following variables:

#   o ssl-unclean-shutdown:

#     This forces an unclean shutdown when the connection is closed, i.e. no

#     SSL close notify alert is send or allowed to received.  This violates

#     the SSL/TLS standard but is needed for some brain-dead browsers. Use

#     this when you receive I/O errors because of the standard approach where

#     mod_ssl sends the close notify alert.

#   o ssl-accurate-shutdown:

#     This forces an accurate shutdown when the connection is closed, i.e. a

#     SSL close notify alert is send and mod_ssl waits for the close notify

#     alert of the client. This is 100% SSL/TLS standard compliant, but in

#     practice often causes hanging connections with brain-dead browsers. Use

#     this only for browsers where you know that their SSL implementation

#     works correctly.

#   Notice: Most problems of broken clients are also related to the HTTP

#   keep-alive facility, so you usually additionally want to disable

#   keep-alive for those clients, too. Use variable "nokeepalive" for this.

#   Similarly, one has to force some clients to use HTTP/1.0 to workaround

#   their broken HTTP/1.1 implementation. Use variables "downgrade-1.0" and

#   "force-response-1.0" for this.

BrowserMatch ".*MSIE.*" \

         nokeepalive ssl-unclean-shutdown \

         downgrade-1.0 force-response-1.0

#   Per-Server Logging:

#   The home of a custom SSL log file. Use this when you want a

#   compact non-error SSL logfile on a virtual host basis.

CustomLog "/home/oauth/data/opt/jboss/httpd/httpd/logs/ssl_request_log" \

          "%t %h %{SSL_PROTOCOL}x %{SSL_CIPHER}x \"%r\" %b"

</VirtualHost>

<subsystem xmlns="urn:jboss:domain:web:2.1" default-virtual-server="default-host" native="false" instance-id="${jboss.node.name}">

                <connector name="http" protocol="HTTP/1.1" scheme="http" socket-binding="http"/>

                <connector name="ajp" protocol="AJP/1.3" scheme="http" socket-binding="ajp"/>

                <virtual-server name="default-host" enable-welcome-root="true">

                    <alias name="localhost"/>

                    <alias name="example.com"/>

                </virtual-server>

</subsystem>

<subsystem xmlns="urn:jboss:domain:modcluster:1.2">

         <mod-cluster-config advertise-socket="modcluster" connector="ajp" proxy-list="1.1.1.1:6666" sticky-session="false" sticky-session-force="false">

                    <dynamic-load-provider>

                        <load-metric type="busyness"/>

                    </dynamic-load-provider>

        </mod-cluster-config>

</subsystem>