基于单片机频率可调功率放大器系统设计protues电路

资料下载地址-1058(百度网盘):点击下载

按键控制频率大小,通过液晶显示出当前频率大小,示波器显示当前波形状态。

基于单片机频率可调功率放大器系统设计protues电路

#include <reg51.h>
#include <string.h>
#define uchar	unsigned char
#define uint	unsigned int

sbit	RS	= P2 ^ 6;
sbit	RW	= P2 ^ 5;
sbit	EN	= P2 ^ 7;

sbit	K1	= P2 ^ 2;
sbit	K2	= P2 ^ 3;
sbit	K3	= P2 ^ 4;
sbit	K4	= P3 ^ 6;
sbit	K5	= P3 ^ 7;

uchar	WaveChoice	= 1;
uchar	ys		= 30;
uchar	i1, b1 = 0;
uchar	sqar_num = 128;
uint	freq;


uchar code	Squ[] = { "Square    " };
uchar code	No[] = { "No Signal out " };

uchar code	Wave[] = { "Wave :" };
uchar code	Fre[] = { "Freq :" };

uchar code tosin[256] =
{ 0x80, 0x83, 0x86, 0x89, 0x8d, 0x90, 0x93, 0x96, 0x99, 0x9c, 0x9f, 0xa2, 0xa5, 0xa8, 0xab,
  0xae, 0xb1, 0xb4, 0xb7, 0xba, 0xbc, 0xbf, 0xc2, 0xc5, 0xc7, 0xca, 0xcc, 0xcf, 0xd1, 0xd4,0xd6,  0xd8,
  0xda, 0xdd, 0xdf, 0xe1, 0xe3, 0xe5, 0xe7, 0xe9, 0xea, 0xec, 0xee, 0xef, 0xf1, 0xf2, 0xf4,
  0xf5, 0xf6, 0xf7, 0xf8, 0xf9, 0xfa, 0xfb, 0xfc, 0xfd, 0xfd, 0xfe, 0xff, 0xff, 0xff, 0xff,0xff,  0xff,
  0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xfe, 0xfd, 0xfd, 0xfc, 0xfb, 0xfa, 0xf9, 0xf8, 0xf7,0xf6,  0xf5,
  0xf4, 0xf2, 0xf1, 0xef, 0xee, 0xec, 0xea, 0xe9, 0xe7, 0xe5, 0xe3, 0xe1, 0xde, 0xdd, 0xda,0xd8,
  0xd6, 0xd4, 0xd1, 0xcf, 0xcc, 0xca, 0xc7, 0xc5, 0xc2, 0xbf, 0xbc, 0xba, 0xb7, 0xb4, 0xb1,0xae,  0xab,
  0xa8, 0xa5, 0xa2, 0x9f, 0x9c, 0x99, 0x96, 0x93, 0x90, 0x8d, 0x89, 0x86, 0x83, 0x80,
  0x80, 0x7c, 0x79, 0x76, 0x72, 0x6f, 0x6c, 0x69, 0x66, 0x63, 0x60, 0x5d, 0x5a, 0x57, 0x55,
  0x51, 0x4e, 0x4c, 0x48, 0x45, 0x43, 0x40, 0x3d, 0x3a, 0x38, 0x35, 0x33, 0x30, 0x2e, 0x2b,
  0x29, 0x27, 0x25, 0x22, 0x20, 0x1e, 0x1c, 0x1a, 0x18, 0x16, 0x15, 0x13, 0x11, 0x10, 0x0e,
  0x0d, 0x0b, 0x0a, 0x09, 0x08, 0x07, 0x06, 0x05, 0x04, 0x03, 0x02, 0x02, 0x01, 0x00, 0x00,
  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x02, 0x02, 0x03, 0x04,
  0x05, 0x06, 0x07, 0x08, 0x09, 0x0a, 0x0b, 0x0d, 0x0e, 0x10, 0x11, 0x13, 0x15, 0x16, 0x18,
  0x1a, 0x1c, 0x1e, 0x20, 0x22, 0x25, 0x27, 0x29, 0x2b, 0x2e, 0x30, 0x33, 0x35, 0x38, 0x3a,
  0x3d, 0x40, 0x43, 0x45, 0x48, 0x4c, 0x4e, 0x51, 0x55, 0x57, 0x5a, 0x5d, 0x60, 0x63, 0x66,
  0x69, 0x6c, 0x6f, 0x72, 0x76, 0x79, 0x7c, 0x80 }; /* ???? */

void DelayMS( uchar ms )
{
	uchar i;

基于单片机频率可调功率放大器系统设计protues电路

上一篇:51中程序存储器和数据存储器


下一篇:[BUUCTF]Reverse——findKey