查看当前磁盘分区情况
fdisk -l
磁盘分区
fdisk /dev/sdb
# 可能用到的Type :
# 8e Linux LVM
# fd Linux raid auto
创建PV
pvcreate /dev/sdb1 /dev/sdb2
确认PV
pvdisplay
pvdisplay /dev/sdb1
pvdisplay /dev/sdb2
删除PV
pvremove /dev/sdb1 /dev/sdb2
创建VG
vgcreate myVG /dev/sdb1 /dev/sdb2
or
vgcreate myVG /dev/sdb1; vgextend myVG /dev/sdb2
确认VG
vgdisplay
vgscan # vgscan scans all SCSI(sd[a-t]), (E)IDE disks([hd[a-t]]), multiple devices(raid) and a bunch of other disk devices in the system looking for LVM physical volumes and volume groups.
重命名VG
vgrename myVG myNewVG
删除VG
vgremove myVG
创建LV
lvcreate -L 400 -n vol01 myVG; lvcreate --name vol01 --size 400M myVG
lvcreate -L 1000 -n vol02 myVG
# -L size, 400M, 1000M
# -n lv's name
确认LV
lvdisplay
lvscan
重命名LV
lvrename myVG vol01 vol01_new; lvrename /dev/myVG/vol01 myVG/vol01_new
删除LV
lvremove
创建Filesystem
mkfs.ext3 /dev/myVG/vol01
mkfs.ext3 /dev/myVG/vol02
mkfs.xfs /dev/myVG/vol03
mkfs.reiserfs /dev/myVG/vol04
挂载Mount Filesystem
mkdir -p /data1 /data2
mount /dev/myVG/vol01 /data1
mount /dev/myVG/vol02 /data2
卸载FS
umount /data1
确认
df -h
编辑写入/etc/fstab
# file system|mount point|type|options|dump|pass
/dev/myVG/vol01 /data1 ext3 rw,noatime 0 0
/dev/myVG/vol02 /data2 ext3 rw,noatime 0 0
-------扩展文件系统---------------
先卸载
umount /data1
扩展LV
lvextend -L +800 /dev/myVG/vol01 # -L size+ 800M
lvextend -L 1.5G /dev/myVG/vol01 # -L size= 1.5G
检查
e2fsck -f /dev/myVG/vol01
# -f Force checking even if the file system seems clean.
重置FS大小(对于fs，扩张此时才实际生效)
resize2fs /dev/myVG/vol01 # ext3
resize_reiserfs /dev/fileserver/media # reiserfs
xfs_growfs /dev/fileserver/backup # xfs
meta-data=/dev/fileserver/backup isize=256 agcount=8, agsize=163840 blks
= sectsz=512 attr=0
data = bsize=4096 blocks=1310720, imaxpct=25
= sunit=0 swidth=0 blks, unwritten=1
naming =version 2 bsize=4096
log =internal bsize=4096 blocks=2560, version=1
= sectsz=512 sunit=0 blks
realtime =none extsz=65536 blocks=0, rtextents=0
装载
mount /data1
------缩减文件系统----------------
现在卸载
umount /data1
检查
e2fsck -f /dev/myVG/vol01
缩减fs
resize2fs /dev/myVG/vol01 2G
删除LV
lvreduce -L 1G dev/myVG/vol01 # -L size= 1G
--添加新的PV到已知VG中----------------------------------
创建partition
fdisk /dev/sdf # type 8e Linux LVM
创建PV
pvcreate /dev/sdf1
添加
vgextend myVG /dev/sdf1
确认
vgdisplay
--删除PV从VG中----------------------------------
先将数据转移
pvmove /dev/sdb_old /dev/sdf_new
再从vg中删除old pv
vgreduce myVG /dev/sdb_old
确认vg中无old pv
vgdisplay
删除old pv
pvremove /dev/sdb_old
确认
pvdisplay
-----清除所有操作--------------------------------------
umount /data1
lvremove /dev/myVG/vol01
vgremove myVG
pvremove /dev/sdb1 /dev/sdb2
restore /etc/fstab manually
shutdown -r now
确认
vgdisplay
pvdisplay
lvdisplay
df -h
===========LVM On RAID1===========
LV |/dev/myVG/share | /dev/myVG/backup | /dev/myVG/unused
---|-------------------|----------------------|------------------------
VG | myVG
---|----------------------------------------------------------------
PV | /dev/md0 | /dev/md1
|----------------------------------------------------------------
|/dev/sdb1 | /dev/sdc1 | /dev/sdd1 | /dev/sde1
---|----------------------------------------------------------------
构建初始状态
pvcreate /dev/sdb1 /dev/sdc1 /dev/sdd1 /dev/sde1
vgcreate myVG /dev/sdb1 /dev/sdc1 /dev/sdd1 /dev/sde1
lvcreate --name share --size 40G myVG
lvcreate --name backup --size 5G myVG
lvcreate --name media --size 1G myVG
mkfs.ext3 /dev/myVG/share
mkfs.xfs /dev/myVG/backup
mkfs.reiserfs /dev/myVG/media
mount /dev/myVG/share /var/share
mount /dev/myVG/backup /var/backup
mount /dev/myVG/media /var/media
df -h
开始构筑
清除sdc1 sde1
modprobe dm-mirror
pvmove /dev/sdc1
pvmove /dev/sde1
vgreduce myVG /dev/sdc1
vgreduce myVG /dev/sde1
pvremove /dev/sdc1
pvremove /dev/sde1
重新设定partition为raid
fdisk /dev/sdc # type fd Linux raid auto
fdisk /dev/sde # type fd Linux raid auto
创建raid
# add /dev/sdc1 to /dev/md0 and /dev/sde1 to /dev/md1.
# Because the second nodes (/dev/sdb1 and /dev/sdd1) are not ready yet, we must specify missing in the following commands:
mdadm --create /dev/md0 --auto=yes -l 1 -n 2 /dev/sdc1 missing
# -l level
# -n Specify the number of active devices in the array.
mdadm --create /dev/md1 --auto=yes -l 1 -n 2 /dev/sde1 missing
创建raid PV
pvcreate /dev/md0 /dev/md1
将新的raid PV加入到VG
vgextend myVG /dev/md0 /dev/md1
确认
pvdisplay
# PV Name /dev/sdb1
# PV Name /dev/sdd1
# PV Name /dev/md0
# PV Name /dev/md1
迁移数据
pvmove /dev/sdb1 /dev/md0
pvmove /dev/sdd1 /dev/md1
移除/dev/sdb1 /dev/sdd1从vg中，并删除
vgreduce myVG /dev/sdb1 /dev/sdd1
pvremove /dev/sdb1 /dev/sdd1
确认
pvdisplay
# PV Name /dev/md0
# PV Name /dev/md1
设置dev/sdb和dev/sdd为raid type
fdisk /dev/sdb # type fd Linux raid auto
fdisk /dev/sdd # type fd Linux raid auto
# add /dev/sdb1 to /dev/md0 and /dev/sdd1 to /dev/md1:
mdadm --manage /dev/md0 --add /dev/sdb1
mdadm --manage /dev/md1 --add /dev/sdd1
检查同步进度，直到100%
cat /proc/mdstat
=========Replacing The Hard Disks With Bigger Ones=====
# The procedure is as follows:
# first we remove /dev/sdb and /dev/sdd from the RAID arrays, replace them with bigger hard disks,
# put them back into the RAID arrays, and then we do the same again with /dev/sdc and /dev/sde.
# First we mark /dev/sdb1 as failed:
mdadm --manage /dev/md0 --fail /dev/sdb1
确认
cat /proc/mdstat
移除
mdadm --manage /dev/md0 --remove /dev/sdb1
确认
cat /proc/mdstat
对/dev/sdd1做同样的操作
mdadm --manage /dev/md1 --fail /dev/sdd1
cat /proc/mdstat
mdadm --manage /dev/md1 --remove /dev/sdd1
cat /proc/mdstat
# now shut it down, pull out the 25GB /dev/sdb and /dev/sdd and replace them with 80GB ones.
格式化新的sdb sdd
fdisk /dev/sdb # type fd Linux raid auto
fdisk /dev/sdd # type fd Linux raid auto
添加新的pv到raid vg中
mdadm --manage /dev/md0 --add /dev/sdb1
mdadm --manage /dev/md1 --add /dev/sdd1
检查同步进度，直到100
cat /proc/mdstat
# Now we do the same process again, this time replacing /dev/sdc and/dev/sde:
mdadm --manage /dev/md0 --fail /dev/sdc1
mdadm --manage /dev/md0 --remove /dev/sdc1
mdadm --manage /dev/md1 --fail /dev/sde1
mdadm --manage /dev/md1 --remove /dev/sde1
插入新的 sdc sde
fdisk /dev/sdc # type fd Linux raid auto
fdisk /dev/sde # type fd Linux raid auto
mdadm --manage /dev/md0 --add /dev/sdc1
mdadm --manage /dev/md1 --add /dev/sde1
# Wait until the synchronization has finished.
cat /proc/mdstat
=====如果事先准备好pv，直接构建raid VG时如下步骤=============================
mdadm --create /dev/md2 --auto=yes -l 1 -n 2 /dev/sdb2 /dev/sdc2
mdadm --create /dev/md3 --auto=yes -l 1 -n 2 /dev/sdd2 /dev/sde2
cat /proc/mdstat # Wait until the synchronization has finished.